Red Button Maker Machine 50mm 2 inch Button Badge Maker Pins Punch Press Machine Aluminum Frame 300pcs Free Button Parts + Circle Cutter (50mm 2 inch)

Retail Price: $ 149.0

Wholesale Price: Inquire Now

Package listing

1x badge maker machine

1x Allen spanner

1x Circle cutter

1x Manual

300 Sets Material (paper is not included)

20x Round Photographic papers (for test use)

Description

Size:

Baseboard length: 29cm (11 ⅜”)
Baseboard width: 17cm (6¾”)
Total height (include the handle): 51cm (20”)

Applicable Papers:

Photographic paper 128-138g/m2, no more than 157g/m2(34-40LB, no more than 41LB);
Multi purpose paper 70g/m2-85g/m2(18-22lb, 20lb is recommend).
Machine net weight: 2.7Kg

Features

Fasttobuy Red Button Maker Machine is Aluminum Alloy Casting Solid Body, Different from the Ordinary Assembly Body, Precise Stainless Steel Mold Secure and Durable;The long Ergonomic Designed Steel Handle and Silicone Cover Offers a Comfortable Grip, Saving Energy & Time.

How to Make a Button ?

Applications

Buyer's Show

Some tips for you !

Q: Cannot make the button well, and the top and bottom do not match.
A: Check the size of the up iron piece and back cover, make sure the up iron piece is a little bigger than the back cover.

Q: How to press the two molds when you make a button?
A: When press mold A, you need to keep a distance, don't let the upper column through the hole, but when press mold B, please let the column through the hole until it completely closed.

Q: What things need to attention when you install the mold of the machine?
A: When you install the mold, the pin of the two sides must be installed, and when you installed the two sides must be pushed to the end, so that the upper and lower molds can be aligned.

Q: How to solve the shell not fully crimping around the back?
A: When you press B mold, you must press slowly and hard until it to the end, and pauses two more seconds, then the buttons will be made very well. If the pressure is lighter, or lightly pressed, the mold will rebound quickly when it is closed, and it will easily fall off.


	Round Button Mold	300pcs Button Parts	100pcs Button Parts	300pcs Metal Button Parts	Cutting Machine	Button Maker Machine DWM4

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Red Button Maker Machine 50mm 2 inch Button Badge Maker Pins Punch Press Machine Aluminum Frame 300pcs Free Button Parts + Circle Cutter (50mm 2 inch)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Package listing

1x badge maker machine

1x Allen spanner

1x Circle cutter

1x Manual

300 Sets Material (paper is not included)

20x Round Photographic papers (for test use)

Description

Size:

Baseboard length: 29cm (11 ⅜”)
Baseboard width: 17cm (6¾”)
Total height (include the handle): 51cm (20”)

Applicable Papers:

Photographic paper 128-138g/m2, no more than 157g/m2(34-40LB, no more than 41LB);
Multi purpose paper 70g/m2-85g/m2(18-22lb, 20lb is recommend).
Machine net weight: 2.7Kg

Features

How to Make a Button ?

Applications

Buyer's Show

Some tips for you !

Q: Cannot make the button well, and the top and bottom do not match.
A: Check the size of the up iron piece and back cover, make sure the up iron piece is a little bigger than the back cover.

Q: How to press the two molds when you make a button?
A: When press mold A, you need to keep a distance, don't let the upper column through the hole, but when press mold B, please let the column through the hole until it completely closed.

Q: What things need to attention when you install the mold of the machine?
A: When you install the mold, the pin of the two sides must be installed, and when you installed the two sides must be pushed to the end, so that the upper and lower molds can be aligned.

Q: How to solve the shell not fully crimping around the back?
A: When you press B mold, you must press slowly and hard until it to the end, and pauses two more seconds, then the buttons will be made very well. If the pressure is lighter, or lightly pressed, the mold will rebound quickly when it is closed, and it will easily fall off.


	Round Button Mold	300pcs Button Parts	100pcs Button Parts	300pcs Metal Button Parts	Cutting Machine	Button Maker Machine DWM4

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.