EPEVER 100a mppt Solar Charge Controller, 12v/24v/36v/48v Auto Max 150V 7500W Input Power fit for Sealed/Gel/Flooded(Tracer10415AN)

Tracer AN series adopts Negative Ground Design controller; 12V/24V/36V/48V Auto identifying system voltage, 100 amps mppt controller.

MAX Input Solar Panel Power:1875W(12V);3750W(24V);5625W(36V);7500W(48V); Max input Voltage:150V;

Support 4 battery charging: Sealed, Gel, Flooded and User. Battery temperature compensation function.

RS-485 communication bus interface and Modbus communication protocol let this mppt Solar Charge Controller available meet various communication requirements in different situations.

MSRT, realizing high conversion efficiency in the situation of low charge power. Quick Technical Support[Springmirror@hotmail.com]

color:

Tracer10415AN mppt controller

Retail Price: $ 438.6

Wholesale Price: Inquire Now

1.High quality & low failure rate components of ST and Infineon to ensure the product’s life

2.Advanced MPPT technology & ultra-fast tracking speed is up to 99.5%.

3.Maximum DC/DC transfer efficiency is as high as 98.7%

4.Auto control system to limit the charging power & current go over the rated value.

5.Real-time energy recording and statistical function,Battery temperature compensation function

6.Hundred percent full load operation in working environment temperature range within charging & discharging

7.Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol

8.To monitor or set the parameters by using the phone Apps or PC software.

9.Full protection to protect your solar panel and battery bank, PV Over Current/power, PV Short Circuit, PV Reverse Polarity, Night Reverse Charging, Battery Over Voltage, Battery Over Discharge, Battery Overheating, Controller Overheating, TVS High Voltage Transients

IMPORTANT NOTE:

Before you wire it, please make sure your battery must be atleast 60% charged prior to connecting to controller.
Always connect your battery first!!!
Never connect your solar panel array to the controller without a battery.
Careful your input power and voltage does not exceed the max.
Any questions, just send us an email.

NOTE: Controller and MT50 may be ship individually， If the mt50 is not in the controller's box, don't worry, there is another shipment. You can message us get the tracking number.

100A CONTROLLER Parameter

Rated charge current : 100A
Grounding: Common Negative
LCD backlight time: 60S(Default)
Recommended cable: 35mm2 (2AWG)
Net Weight: 7.4kg(16.31 lb)
Conversion efficiency: ≤98.7%
Wattage: 1000W-7500W, MAX input power: 1875W/12V；3750W/24V；5625W/36V；7500W/48V
Battery Type: Sealed/Gel/Flooded/User
Max. PV open circuit voltage: 150V
Rated charge Power : 1250W/12V，2500W/24V，3750W/36V，5000W/48V

Storage temperature range：-30℃～+85℃
Dimension: 394×242×143mm
Net Weight: 7.4kg(16.31 lb)
Enclosure：IP20
Safety：EN/IEC62109-1
EMC：EN61000-6-3/EN61000-6-1
FCC：47 CFR Part 15, Subpart B
ROHS：IEC62321-3-1
Self-consumption: 98mA/12V;60mA/24V;50mA/36V;46mA/48V
Relay: Rated Value:5A/30VDC; Max. Value:0.5A/60VDC


1. EPEVER 100A MPPT solar charge controller*1PCS MAX input power: 1875W/12V ，3750W/24V， 5625W/36V，7500W/48V ; Max input voltage: 150V battery charging support: Sealed, Gel, Flooded and User. Battery temperature compensation function.	2. MT50 Remote Meter*1PCS MT50 can display various operating data and fault info the system. The information can be displayed on a backlit LCD screen, the buttons are easy-to-operate, and the numeric display is readable. NOTE: MT50 may shipped separately, please let us know if you have not received it. Thank you ！！！	3. Remote Temperature Sensor1pcs+USB to RS485 cable1pcs Acquisition of battery temperature for undertaking temperature compensation of control parameters, the standard length of the cable is 3m. USB to RS485 converter is used to monitor each controller using Solar Station PC software. The length of cable is 1.5m


	EPEVER 100A MPPT SOLAR CHARGE CONTROLLER	80A SOLAR CHARGE CONTROLLER	4-in-1 DC Electricity Usage Monitor	solar system monitor	solar system monitor	MC4 for solar system
MAX input voltage	150V	200V	100V	AC100A	DC100A	10 pair
Rated charge current	100A	80A	100A

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

EPEVER 100a mppt Solar Charge Controller, 12v/24v/36v/48v Auto Max 150V 7500W Input Power fit for Sealed/Gel/Flooded(Tracer10415AN)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

1.High quality & low failure rate components of ST and Infineon to ensure the product’s life

2.Advanced MPPT technology & ultra-fast tracking speed is up to 99.5%.

3.Maximum DC/DC transfer efficiency is as high as 98.7%

4.Auto control system to limit the charging power & current go over the rated value.

5.Real-time energy recording and statistical function,Battery temperature compensation function

6.Hundred percent full load operation in working environment temperature range within charging & discharging

7.Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol

8.To monitor or set the parameters by using the phone Apps or PC software.

IMPORTANT NOTE:

Before you wire it, please make sure your battery must be atleast 60% charged prior to connecting to controller.
Always connect your battery first!!!
Never connect your solar panel array to the controller without a battery.
Careful your input power and voltage does not exceed the max.
Any questions, just send us an email.

NOTE: Controller and MT50 may be ship individually， If the mt50 is not in the controller's box, don't worry, there is another shipment. You can message us get the tracking number.

100A CONTROLLER Parameter

Rated charge current : 100A
Grounding: Common Negative
LCD backlight time: 60S(Default)
Recommended cable: 35mm2 (2AWG)
Net Weight: 7.4kg(16.31 lb)
Conversion efficiency: ≤98.7%
Wattage: 1000W-7500W, MAX input power: 1875W/12V；3750W/24V；5625W/36V；7500W/48V
Battery Type: Sealed/Gel/Flooded/User
Max. PV open circuit voltage: 150V
Rated charge Power : 1250W/12V，2500W/24V，3750W/36V，5000W/48V

Storage temperature range：-30℃～+85℃
Dimension: 394×242×143mm
Net Weight: 7.4kg(16.31 lb)
Enclosure：IP20
Safety：EN/IEC62109-1
EMC：EN61000-6-3/EN61000-6-1
FCC：47 CFR Part 15, Subpart B
ROHS：IEC62321-3-1
Self-consumption: 98mA/12V;60mA/24V;50mA/36V;46mA/48V
Relay: Rated Value:5A/30VDC; Max. Value:0.5A/60VDC


1. EPEVER 100A MPPT solar charge controller*1PCS MAX input power: 1875W/12V ，3750W/24V， 5625W/36V，7500W/48V ; Max input voltage: 150V battery charging support: Sealed, Gel, Flooded and User. Battery temperature compensation function.	2. MT50 Remote Meter*1PCS MT50 can display various operating data and fault info the system. The information can be displayed on a backlit LCD screen, the buttons are easy-to-operate, and the numeric display is readable. NOTE: MT50 may shipped separately, please let us know if you have not received it. Thank you ！！！	3. Remote Temperature Sensor1pcs+USB to RS485 cable1pcs Acquisition of battery temperature for undertaking temperature compensation of control parameters, the standard length of the cable is 3m. USB to RS485 converter is used to monitor each controller using Solar Station PC software. The length of cable is 1.5m


	EPEVER 100A MPPT SOLAR CHARGE CONTROLLER	80A SOLAR CHARGE CONTROLLER	4-in-1 DC Electricity Usage Monitor	solar system monitor	solar system monitor	MC4 for solar system
MAX input voltage	150V	200V	100V	AC100A	DC100A	10 pair
Rated charge current	100A	80A	100A

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.