uxcell Heat Shrink Tubing, 9.5mm Dia 15.5mm Flat Width 2:1 Heat Shrink Wrap Cable Sleeve Heatshrink Tube 5m White

Diameter(Before Shrinking): 9.5mm / 0.35\"; Flat Width: 15.5mm / 0.6\"; Length(approx.): 5M / 16.4ft; Shrink Ratio: 2:1.

Operating Temperature: -55 to 125 Degree Celsius; Flammability: VW-1, Flame Retardant.

Minimum Shrinkage Temp: +70 Degree Celsius; Full Shrinkage Temp: +125 Degree Celsius maximum.

Our Heat Shrink Tubes are perfect for appliance/auto electric wire cable harness wrapping, which will be protective in harsh environments.

Fast and Easy Use, can be customized at home to fit your need, solve your problems within few minutes.

size:

0.35" * 196.9" (D*L)

color:

White

Retail Price: $ 6.99

Wholesale Price: Inquire Now

This heat shrink tube is best for wire connection, solder joint protection, connectors sealing, group lines marking, resistance electric capacity insulation protection etc.

Material: Polyethylene

Rated voltage: 1000V

Dielectric strength: 1KV

Item Shape: Round/Flat

Shrinkage Ratio: 2:1 ( will maximum shrink to 1/2 of its supplied diameter )

Minimum Shrinkage Temp: +70 Degree Celsius

Full Shrinkage Temp: +125 Degree Celsius maximum

Operating Temperature:-55 to 125 Degree Celsius

Flammability: VW-1, Flame Retardant

Heat shrink tubing can do a lot of things, not only does it provide your cables with protection against abrasion, chemicals and weather, it's also great for bundling, color-coding and strain relief. Insulating your cables with heat shrink can be an easy do-it-yourself activities.


Chemical Resistance	Broad Working Temperature	Good Electrical Insulation	High-strength Toughness

Step 1: CHOOSE THE RIGHT SIZE TUBE

Measure the diameter of wire/cable you want to wrap, make sure the diameter is equal to the size of heat shrink tube after shrank, because the tube will shrink up to 1/2 of original diameter after heating.

Step 2: CUT THE SIZE YOU NEED

Cut the heat shrink tubing to a usable length, and be sure to allow for a minimum 1/4" overlap over any existing insulation or connectors. Keep in mind that tubing also shrinks lengthwise. Most heat shrink can be cut easily with standard scissors, or you can use a small knife.

Step 3: WRAP THE WIRE WITH THE HEAT SHRINK TUBE

If you'll be splicing two cables together, slide the tubing over the center of the splice, and allow for equal overlap on both sides, so that the entire splice itself is fully covered.

Step 4: HEAT THE TUBE UNTIL THE WIRE IS WRAPPED TIGHTLY

Any commercial heat gun or heat shrink oven can be used to shrink the tubing. Evenly apply heat over the length and around the diameter of the tubing, until it is uniformly shrunken and conforms to the shape of the cable, hose, splice or action figure that it's covering.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

uxcell Heat Shrink Tubing, 9.5mm Dia 15.5mm Flat Width 2:1 Heat Shrink Wrap Cable Sleeve Heatshrink Tube 5m White

BEST SELLERS

Product introduction

Shipping Notices

Product Description

This heat shrink tube is best for wire connection, solder joint protection, connectors sealing, group lines marking, resistance electric capacity insulation protection etc.

Material: Polyethylene

Rated voltage: 1000V

Dielectric strength: 1KV

Item Shape: Round/Flat

Shrinkage Ratio: 2:1 ( will maximum shrink to 1/2 of its supplied diameter )

Minimum Shrinkage Temp: +70 Degree Celsius

Full Shrinkage Temp: +125 Degree Celsius maximum

Operating Temperature:-55 to 125 Degree Celsius

Flammability: VW-1, Flame Retardant


Chemical Resistance	Broad Working Temperature	Good Electrical Insulation	High-strength Toughness

Step 1: CHOOSE THE RIGHT SIZE TUBE

Step 2: CUT THE SIZE YOU NEED

Step 3: WRAP THE WIRE WITH THE HEAT SHRINK TUBE

If you'll be splicing two cables together, slide the tubing over the center of the splice, and allow for equal overlap on both sides, so that the entire splice itself is fully covered.

Step 4: HEAT THE TUBE UNTIL THE WIRE IS WRAPPED TIGHTLY

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.