DFROBOT Gravity: 1602 LCD Keypad Shield For Arduino

Operating Voltage: 5V

5 Push buttons to supply a custom menu control panel

RST button for resetting Arduino program

Integrate a potentiometer for adjusting the backlight

16 character x 2 line HD44780 compatible LCD

Retail Price: $ 13.71

Wholesale Price: Inquire Now

Popular LCD Keypad Shield for Arduino and Other Variants

It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Just one Analog Pin 0 is used to read the five pushbuttons. The LCD shield supports contrast adjustment and back-lit on/off functions. It also exposes five analog pins with DFRobot color code for easy analog sensor plugging and display. The on board LED indicates power on.
This lcd arduino shield has 5 keys — select, up, right, down and left which allow you move through menus and make selections straight from one board attached to your Arduino project without requiring a massive tower of shields.
This design allows you keep connecting sensors to the rest of the pins, and use it for monitoring or menu selection with the push buttons even for gaming. Project applications require testing or debugging. Displaying information right away help on most occasions when a computer is not at reach. If you are planning to build something not attached to a computer and you need to check what is going on when you place it on position, this addition will prove very valuable to make sure the program is running well.
The used LCD pins are not exposed on top side of the board leaving only the unused ones. This way, conflict with LCD pins on top of the board will not happen anymore. This design includes a APC / Bluetooth v3 socket to enable you data transmission with your robot.

SPECIFICATION

Operating Voltage: 5V
5 Push buttons to supply a custom menu control panel
RST button for resetting arduino program
Integrate a potentiometer for adjusting the backlight
Pin used:
- D4-D7 -> LCD Data transmission
- D8 -> Register Select
- D9 -> Enable pin
- D10 -> Backlight control
APC&BT pin header for connecting wireless devices, directly compatible with:
- APC220 Radio Communication Module
- DFRobot Bluetooth V3
Expanded available I/O pins
Expanded Analog Pinout with standard DFRobot configuration for fast sensor extension
Dimension: 80 x 58 mm (3.15x 2.28 in)

Product Dimension

Layout

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

DFROBOT Gravity: 1602 LCD Keypad Shield For Arduino

BEST SELLERS

Product introduction

Shipping Notices

This is a very popular lcd keypad shield for Arduino and other variants. it includes a 2x16 character lcd display and six momentary push buttons. pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the lcd. just one analog pin 0 is used to read the five pushbuttons. the lcd shield supports contrast adjustment and back-light on/off functions and has an led to indicate power on. it also breaks out five analog pins with dfrobot color code for easy analog sensor plugging and display. This design is great since it easily lets you connect sensors to the rest of the pins, or use it for monitoring or menu selection with the push buttons even for gaming. often project applications require testing or debugging. displaying information right away is helpful on most occasions when a computer is not at reach. if you are planning to build something not attached to a computer and you need to check what's going on when you place it on position, this addition will prove very valuable to make sure the program is running well. The used lcd pins are not exposed on top side of the board leaving only the unused ones. this eliminates conflicts with the lcd. this design includes a apc / Bluetooth v3 socket to enable data transmission with your robot.

Product Description

Popular LCD Keypad Shield for Arduino and Other Variants

It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Just one Analog Pin 0 is used to read the five pushbuttons. The LCD shield supports contrast adjustment and back-lit on/off functions. It also exposes five analog pins with DFRobot color code for easy analog sensor plugging and display. The on board LED indicates power on.
This lcd arduino shield has 5 keys — select, up, right, down and left which allow you move through menus and make selections straight from one board attached to your Arduino project without requiring a massive tower of shields.
This design allows you keep connecting sensors to the rest of the pins, and use it for monitoring or menu selection with the push buttons even for gaming. Project applications require testing or debugging. Displaying information right away help on most occasions when a computer is not at reach. If you are planning to build something not attached to a computer and you need to check what is going on when you place it on position, this addition will prove very valuable to make sure the program is running well.
The used LCD pins are not exposed on top side of the board leaving only the unused ones. This way, conflict with LCD pins on top of the board will not happen anymore. This design includes a APC / Bluetooth v3 socket to enable you data transmission with your robot.

SPECIFICATION

Operating Voltage: 5V
5 Push buttons to supply a custom menu control panel
RST button for resetting arduino program
Integrate a potentiometer for adjusting the backlight
Pin used:
- D4-D7 -> LCD Data transmission
- D8 -> Register Select
- D9 -> Enable pin
- D10 -> Backlight control
APC&BT pin header for connecting wireless devices, directly compatible with:
- APC220 Radio Communication Module
- DFRobot Bluetooth V3
Expanded available I/O pins
Expanded Analog Pinout with standard DFRobot configuration for fast sensor extension
Dimension: 80 x 58 mm (3.15x 2.28 in)

Product Dimension

Layout

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.