- Babysense Petite Clip is a highly sensitive motion sensor.
- Easy to use, simply turn on and clip to baby's diaper.
It is recommended to fold over the top of the diaper and then clip the monitor on. - Can be clipped over the waistband of baby's diaper or pants, can also be used with vests.
- When clipped on, the sensor will rest softly on baby’s tummy and will detect even the slightest of movements.
- MONITORING MODE: Constantly monitors baby’s breathing movements.
-
PRO-ACTIVE VIBRATION STIMULATION: Activates a gentle vibrating stimulation if no tummy movement is detected at all for a period of 15 seconds. In some cases, such tactile stimulation is enough to reassert baby’s movement, and in this case Petite Clip will revert to monitoring mode.
-
BUILT-IN ALARM: If no further movement is detected for another 5 seconds, a sound and visual alarm is activated.
INSIDE THE BOX
- Movement Monitor
- Protective Case
- CR2 3.0v 1.2AHR Lithium Battery – preinstalled in the monitor
- Battery Replacement Tool – inside the protective case
- User’s Guide
OUR RECOMMENDATIONS FOR PROPER INSTALLATION:
- Before installing and using Petite Clip, make sure you read all the instructions carefully.
- Carry out the daily Performance Test, as instructed in the User Guide.
- The product does not replace responsible and proper adult supervision of your baby.
- A properly fitted diaper is essential for the proper function of your Petite Clip. False alarms may happen when contact is lost between the monitor's sensor pad and the tummy. The reason for that could be if the diaper is too large or has loosened. Could also happen when the diaper gets too wet.
- To reduce the risk of false alarms, make sure the diaper is tight and that proper contact is established with the sensor (the rubber part in the back of the monitor).
- We strongly recommend to fold the diaper over on top so it's really secure when you clip the monitor on. Folding down the top of the diaper seems to reduce significantly the risk of false alarms.
- If your baby is rolling over a lot, it is also possible to put a onesie and a pair of sweat pants on, and then clip the monitor over the elastic band of the pants (it's thicker).
- Using a diaper cover, also solves the alarm issues.
- When using the monitor on baby's clothing, we recommend to set the device to sensitive mode as described in "Sensitive Mode" section in the user guide.