Mophorn Servo Motor, 80ST-M04025 AC Servo Motor 1KW 4N.m 2500rpm Pro Servo Motor Control CNC Processing Equipment, Cutting Machine, Food Processing Machine, Conveying Equipment, 220V

【PURE COPPER COIL】- Made of pure copper coil, ensure the high performance,durability and stability. It also can still run smoothly and quietly at low speeds.

【ENHANCED MAGNETIC STEEL SHEET】-Each shaft is equipped with a magnetic stainless steel sleeve.

【WATERPROOF AVIATION PLUG】- 5 sealing rings and sealing rings are sealed with pressure pre-tightening. When the connector is inflated and contracted, the waterproof effect will be ensured for a long time.

【SILICON STEEL ROTOR】- Made of silicon steel material. It is more torque than the motor in the industry, the output is more stable, the noise is lower, and the life is longer.

【WIDE APPLICATION】- Suitable for a wide range of automation equipment and instruments in the field of motion control. Electronic processing and inspection,cutting machines, CNC machine tools, etc.

Retail Price: $ 99.99

Wholesale Price: Inquire Now

80ST-M04025 Servo Motor

Product Description

Power: 1Kw
Currrent: 4.4A
Rotation Rate: 2500rpm
Rated Torque: 4N.m
Peak Torque: 12N.m
Torque Coefficient: 0.9N. m/A
Line-Line Resistance: 1.83Ω
Line-Line Inductance: 4.72mH

Package Content

1 x AC Servo Motor
1 x Encoder Cable
1 x Power Cable

1KW 4N.m 2500rpm AC Servo Motor

Welcome to our store!

This 80ST-M04025 AC servo motor is very widely used. It can be used in CNC processing equipment, food processing machines, material conveying equipment, medical equipment, textile machinery, cutting machines, engraving machines and general machinery automation, automatic servo control field.

Installation/disassembly components coupled to the motor shaft end, do not hit shaft hard to prevent the other side of servo motor shaft encoder was knocked out bad.

Encoder Iine Number: 2500PPR
Insulation Class: Class B (130℃)
Safety Class: Ip65
The Operating of Environmental Conditions: Temperature: -20℃ ~ +50℃, Humidity : Below 90%RH NO Dewing
Electrical time Constant: 2.58MS


Pure Copper Coil Made of pure copper coil, ensure the high performance,durability and stability. It also can still run smoothly and quietly at low speeds.	Upgraded Magnetic Steel Sheet The magnetic steel extracted from rare earth is magnetic and has permanent magnetism. In order to avoid degumming of the magnetic steel sheet, each shaft is equipped with a magnetic stainless steel sleeve.	Sealed Aviation Plug Up to 5 sealing rings and sealing rings are sealed with pressure pre-tightening. When the connector is inflated and contracted, the pre-tightening force will not be lost, and the waterproof effect will be ensured for a long time.


Silicon Steel Rotor Made of high-quality silicon steel material, the bearing is made of German technology, which is more torque than the motor in the industry, the output is more stable, the noise is lower, and the life is longer.	Great Noise Reduction Reasonable internal structure layout andcomponent noise reduction optimization. Ensure strong power and low noise of about 30-40 dB, longer motor life and more stable performance.	Widely Used Suitable for a wide range of automation equipment and instruments in the field of motion control. Electronic processing and inspection, semiconductor packaging, laser cutting and welding, laser photo-alignment, engraving machines, marking machines, cutting machines, CNC machine tools, etc.


	110ST-M05030 CNC Servo Motor	110ST-M06030 CNC Servo Motor	80ST-M02430 CNC Servo Motor	3.8KW AC Servo Motor	3.8KW Servo Motor Drive Controller Kit
Power	1.5KW	1.8KW	750W	3.8KW	3.8KW
Rotation Rate	3000rpm	3000rpm	3000rpm	2500rpm	2500rpm
Rated Torque	5N.m	6N.m	2.39N.m	15N.m	15N.m
Line-Line Resistance	1.03Ω	0.81Ω	2.88Ω	0.49Ω	0.49Ω
Line-Line Inductance	3.43mH	2.59mH	6.4mH	1.68mH	1.68mH
Encoder Iine Number	2500PPR	2500PPR	2500PPR	2500PPR	2500PPR
Insulation Class	Class B (130℃)	Class B (130℃)	Class B (130℃)	Class B (130℃)	Class B (130℃)
Safety Class	Ip65	Ip65	Ip65	Ip65	Ip65
Electrical time Constant	3.33MS	3.2MS	2.22MS	3.43MS	3.43MS
Drive Communication Method					RS-232 or RS-485


	90ST-M02430 AC Servo Motor	110ST-M06030 AC Servo Motor	130ST-M10025 AC Servo Motor
Power	750W	1.8KW	2.6KW
Rotation Rate	3000rpm	3000rpm	2500rpm
Rated Torque	2.4N.m	6N.m	10N.m
Line-Line Resistance	3.2Ω	0.81Ω	0.73Ω
Line-Line Inductance	7.0mH	2.59mH	2.45mH
Encoder Iine Number	2500PPR	2500PPR	2500PPR
Insulation Class	Class B (130℃)	Class B (130℃)	Class B (130℃)
Safety Class	Ip65	Ip65	Ip65
Electrical time Constant	2.2MS	3.2MS	3.36MS
Drive Communication Method	RS-232 or RS-485	RS-232 or RS-485	RS-232 or RS-485

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Mophorn Servo Motor, 80ST-M04025 AC Servo Motor 1KW 4N.m 2500rpm Pro Servo Motor Control CNC Processing Equipment, Cutting Machine, Food Processing Machine, Conveying Equipment, 220V

BEST SELLERS

Product introduction

Shipping Notices

Specifications: Power: 1KW Voltage: 220V Currrent: 4.4A Rotation Rate: 2500PRM Rated Torque: 4N.m Max Torque: 12N.m Moment Coefficient: 0.9N.m/A Resistance: 1.83Ω Package Content: 1 x Motor 1 x Encoder Cable 1 x Power Cable

Product Description

80ST-M04025 Servo Motor

Product Description

Power: 1Kw
Currrent: 4.4A
Rotation Rate: 2500rpm
Rated Torque: 4N.m
Peak Torque: 12N.m
Torque Coefficient: 0.9N. m/A
Line-Line Resistance: 1.83Ω
Line-Line Inductance: 4.72mH

Package Content

1 x AC Servo Motor
1 x Encoder Cable
1 x Power Cable

1KW 4N.m 2500rpm AC Servo Motor

Welcome to our store!

Installation/disassembly components coupled to the motor shaft end, do not hit shaft hard to prevent the other side of servo motor shaft encoder was knocked out bad.

Encoder Iine Number: 2500PPR
Insulation Class: Class B (130℃)
Safety Class: Ip65
The Operating of Environmental Conditions: Temperature: -20℃ ~ +50℃, Humidity : Below 90%RH NO Dewing
Electrical time Constant: 2.58MS


Pure Copper Coil Made of pure copper coil, ensure the high performance,durability and stability. It also can still run smoothly and quietly at low speeds.	Upgraded Magnetic Steel Sheet The magnetic steel extracted from rare earth is magnetic and has permanent magnetism. In order to avoid degumming of the magnetic steel sheet, each shaft is equipped with a magnetic stainless steel sleeve.	Sealed Aviation Plug Up to 5 sealing rings and sealing rings are sealed with pressure pre-tightening. When the connector is inflated and contracted, the pre-tightening force will not be lost, and the waterproof effect will be ensured for a long time.


Silicon Steel Rotor Made of high-quality silicon steel material, the bearing is made of German technology, which is more torque than the motor in the industry, the output is more stable, the noise is lower, and the life is longer.	Great Noise Reduction Reasonable internal structure layout andcomponent noise reduction optimization. Ensure strong power and low noise of about 30-40 dB, longer motor life and more stable performance.	Widely Used Suitable for a wide range of automation equipment and instruments in the field of motion control. Electronic processing and inspection, semiconductor packaging, laser cutting and welding, laser photo-alignment, engraving machines, marking machines, cutting machines, CNC machine tools, etc.


	110ST-M05030 CNC Servo Motor	110ST-M06030 CNC Servo Motor	80ST-M02430 CNC Servo Motor	3.8KW AC Servo Motor	3.8KW Servo Motor Drive Controller Kit
Power	1.5KW	1.8KW	750W	3.8KW	3.8KW
Rotation Rate	3000rpm	3000rpm	3000rpm	2500rpm	2500rpm
Rated Torque	5N.m	6N.m	2.39N.m	15N.m	15N.m
Line-Line Resistance	1.03Ω	0.81Ω	2.88Ω	0.49Ω	0.49Ω
Line-Line Inductance	3.43mH	2.59mH	6.4mH	1.68mH	1.68mH
Encoder Iine Number	2500PPR	2500PPR	2500PPR	2500PPR	2500PPR
Insulation Class	Class B (130℃)	Class B (130℃)	Class B (130℃)	Class B (130℃)	Class B (130℃)
Safety Class	Ip65	Ip65	Ip65	Ip65	Ip65
Electrical time Constant	3.33MS	3.2MS	2.22MS	3.43MS	3.43MS
Drive Communication Method					RS-232 or RS-485


	90ST-M02430 AC Servo Motor	110ST-M06030 AC Servo Motor	130ST-M10025 AC Servo Motor
Power	750W	1.8KW	2.6KW
Rotation Rate	3000rpm	3000rpm	2500rpm
Rated Torque	2.4N.m	6N.m	10N.m
Line-Line Resistance	3.2Ω	0.81Ω	0.73Ω
Line-Line Inductance	7.0mH	2.59mH	2.45mH
Encoder Iine Number	2500PPR	2500PPR	2500PPR
Insulation Class	Class B (130℃)	Class B (130℃)	Class B (130℃)
Safety Class	Ip65	Ip65	Ip65
Electrical time Constant	2.2MS	3.2MS	3.36MS
Drive Communication Method	RS-232 or RS-485	RS-232 or RS-485	RS-232 or RS-485

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy