ACTUAL FRONT END OUTER DIMENSIONS ARE [INNER GRILLE SIZE] + [1.75]
How To Measure A Grille Overall Size: Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the *hole* in the wall/duct. Every grille has a front end frame, that will overlap at wall joint. Total outer size of this grille is; listed width + 1.75, listed height + 1.75".
Width vs Height The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system. These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Easy Unrestricted Air Flow For Your HVAC System - This model has ½” fin design This model can have the face/door removed. This model uses a 1" thick filter.