Can-Am Defender Vented Full Windshield
Ride Whether it’s Hot or Cold
SuperATV’s Polycarbonate Vented Full Windshield makes riding in your Can-Am Defender better. How you ask? Take your Defender out any day of the year, hot or cold. The large flip-up vent situated at the bottom of the windshield gives you tons of airflow when you need it and seals snug against the UTV body when you don’t. The flip-up panel matches the rest of your windshield and secures using thumb screws that will keep it in place through every bump and bounce. Plus, all of it is hard coated and scratch resistant so it won’t get dinged up or impair the look of your windshield.
Whether you’re hauling feed or getting rowdy, our vented windshield will make your cab the place to be.
Perfect Fit
The scratch-resistant polycarbonate used in this windshield is cut using CAD-drawn dimensions to ensure it fits your Defender perfectly. The heavy-duty clamps and seals keep it snug and rattle-free and make installation a breeze. You can get it installed and be on the go in minutes!
FEATURES
- Made with 1/4" scratch-resistant polycarbonate
- Hard coated on both sides for durability
- 250 times stronger than glass
- Innovative flip-up vent panel
- High air-flow when you need it, perfect seal when you don’t
- Vent secures tightly with thumb screws
- Vent secures tightly with thumb screws
Scratch-Resistant Polycarbonate
Our scratch-resistant hard coating makes this polycarbonate unbeatable. The hard coating is highly scratch, UV, and chemically resistant. That means that you can cruise down the trail all day long through mud, trees, bushes, or rocks and your windshield's hard coating will keep it safe and crystal clear. Our 1/4" polycarbonate is 250 times stronger than glass and 25 times stronger than acrylic, so that rock that would send shards of glass or acrylic into your cab won’t break polycarbonate. It’s super tough and very abrasion resistant. It can’t be beat.
|
|
|
|
|---|---|---|
|
|
|
|
The SuperATV Story
SuperATV started with a passion for off-roading that’s probably a lot like yours. Our first product, a 2” Polaris Sportsman EZ Install lift kit, came as a result of our founder Harold Hunt’s love of creek riding.
The success of the lift kit, based on his own design, led Harold to set up shop in his own garage, which also served as the warehouse and shipping center. The intent was to fill a small need for off-road enthusiasts which was the same need he had for better Sportsman parts.
He was delighted and surprised when it turned out the need was much, much greater than he realized, and it was growing every day. As the industry exploded and demand grew, so did SuperATV.
It wasn’t just about 2″ Sportsman lifts anymore, it was about improving every part possible on every machine available. As the ideas multiplied and demand from avid riders grew, our product line expanded to include a full range of aftermarket parts.
Fast forward to today, SuperATV offers thousands of ATV and UTV accessories, has served hundreds of thousands of customers and is still a family-owned and operated business based out of Madison, Indiana.
Our “garage” has expanded to nearly half a million square feet of manufacturing and warehouse space, plus we have one pretty amazing test facility of over 600 acres of prime riding land. That’s where we put every product we make to the test to ensure you have the highest quality accessories.
Although we may be much bigger, we haven’t changed why we’re here: To offer enthusiasts, racers and the people who get things done, the best aftermarket ATV and UTV parts and accessories at the best prices. That is our promise and our loyal commitment to you for being our customer.
BEST SELLERS
Product Description
Can-Am Defender Vented Full Windshield
Ride Whether it’s Hot or Cold
SuperATV’s Polycarbonate Vented Full Windshield makes riding in your Can-Am Defender better. How you ask? Take your Defender out any day of the year, hot or cold. The large flip-up vent situated at the bottom of the windshield gives you tons of airflow when you need it and seals snug against the UTV body when you don’t. The flip-up panel matches the rest of your windshield and secures using thumb screws that will keep it in place through every bump and bounce. Plus, all of it is hard coated and scratch resistant so it won’t get dinged up or impair the look of your windshield.
Whether you’re hauling feed or getting rowdy, our vented windshield will make your cab the place to be.
Perfect Fit
The scratch-resistant polycarbonate used in this windshield is cut using CAD-drawn dimensions to ensure it fits your Defender perfectly. The heavy-duty clamps and seals keep it snug and rattle-free and make installation a breeze. You can get it installed and be on the go in minutes!
FEATURES
- Made with 1/4" scratch-resistant polycarbonate
- Hard coated on both sides for durability
- 250 times stronger than glass
- Innovative flip-up vent panel
- High air-flow when you need it, perfect seal when you don’t
- Vent secures tightly with thumb screws
- Vent secures tightly with thumb screws
Scratch-Resistant Polycarbonate
Our scratch-resistant hard coating makes this polycarbonate unbeatable. The hard coating is highly scratch, UV, and chemically resistant. That means that you can cruise down the trail all day long through mud, trees, bushes, or rocks and your windshield's hard coating will keep it safe and crystal clear. Our 1/4" polycarbonate is 250 times stronger than glass and 25 times stronger than acrylic, so that rock that would send shards of glass or acrylic into your cab won’t break polycarbonate. It’s super tough and very abrasion resistant. It can’t be beat.
|
|
|
|
|---|---|---|
|
|
|
|
The SuperATV Story
SuperATV started with a passion for off-roading that’s probably a lot like yours. Our first product, a 2” Polaris Sportsman EZ Install lift kit, came as a result of our founder Harold Hunt’s love of creek riding.
The success of the lift kit, based on his own design, led Harold to set up shop in his own garage, which also served as the warehouse and shipping center. The intent was to fill a small need for off-road enthusiasts which was the same need he had for better Sportsman parts.
He was delighted and surprised when it turned out the need was much, much greater than he realized, and it was growing every day. As the industry exploded and demand grew, so did SuperATV.
It wasn’t just about 2″ Sportsman lifts anymore, it was about improving every part possible on every machine available. As the ideas multiplied and demand from avid riders grew, our product line expanded to include a full range of aftermarket parts.
Fast forward to today, SuperATV offers thousands of ATV and UTV accessories, has served hundreds of thousands of customers and is still a family-owned and operated business based out of Madison, Indiana.
Our “garage” has expanded to nearly half a million square feet of manufacturing and warehouse space, plus we have one pretty amazing test facility of over 600 acres of prime riding land. That’s where we put every product we make to the test to ensure you have the highest quality accessories.
Although we may be much bigger, we haven’t changed why we’re here: To offer enthusiasts, racers and the people who get things done, the best aftermarket ATV and UTV parts and accessories at the best prices. That is our promise and our loyal commitment to you for being our customer.
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
