HEATIT JHSF 24-feet 120V Regulating Pre-assembled Pipe Cable
HEATIT JHSF 24-feet 120V Regulating Pre-assembled Pipe Cable
  • JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com).
  • Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable.
  • Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2\" in diameter. Can be used by straight, spiral and overlap.
  • ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65.
  • Testing the cable before the installation. Four year limited warranty. If you are not completely satisfied, please feel free to contact us in any time.
size:
  • 24-feet
color:
  • Black
Retail Price: $ 31.99
Wholesale Price: Inquire Now

The ambient temperature during installation affects how much you can bend the cable, as it will become stiffer in colder temperatures. If you install when the temperature is 50ºF (10ºC) or above, you can bend the cable to a radius of 1/2”. However, if installing in colder temperatures, the following limits for bending radius must be observed:

  • The minimum bending radius is 1/2” @ 50ºF (10ºC) or above.
  • The minimum bending radius is 1” @ 32ºF (0ºC).
  • The minimum bending radius is 1-1/8” @ -4ºF (-20ºC).
  • The lowest installation temperature is -4ºF (-20ºC).
JHSF JHSF1 JHSF1-CT HTM HISD
JHSF JHSF1 JHSF1-CT HTM HISD
Available for pipe freezeing protection
Available for roof deicing No No No
Install by Spiral,Wrap or Cross No
Build in thermostat No No No
Cable Structure Self regulating Self regulating Self regulating Self regulating Regular (Constant wattage)
Output @10°C 3w/ft 5w/ft 5w/ft 3w/ft 7w/ft Constant
Used on not always water filled pipes No
Length of cold lead 2ft 3ft 6ft No 2ft
Water proof grade(end seal) IP65 IP65 IP68 No IP65
Water proof grade(connection) IP65 IP65 IP65 No IP65

Tips

  • Never alter or cut the length of the heating cable in any way. Any alteration may result in electrical shock or fire.
  • Cable should not run through the building walls, ceilings or floors.
  • Never use metal binding to secure heating cable to pipe.
  • The thermostat and the entire heating cable has to be in contact with the tape.

Testing the cable before the installation.

Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor,please click here to learn more.
...
After Sale Service:
1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Click to go to the Help Center to view the Returns Policy
...
...
HEATIT JHSF 24-feet 120V Regulating Pre-assembled Pipe Cable
HEATIT JHSF 24-feet 120V Regulating Pre-assembled Pipe Cable

BEST SELLERS

...

Product Description

The ambient temperature during installation affects how much you can bend the cable, as it will become stiffer in colder temperatures. If you install when the temperature is 50ºF (10ºC) or above, you can bend the cable to a radius of 1/2”. However, if installing in colder temperatures, the following limits for bending radius must be observed:

  • The minimum bending radius is 1/2” @ 50ºF (10ºC) or above.
  • The minimum bending radius is 1” @ 32ºF (0ºC).
  • The minimum bending radius is 1-1/8” @ -4ºF (-20ºC).
  • The lowest installation temperature is -4ºF (-20ºC).
JHSF JHSF1 JHSF1-CT HTM HISD
JHSF JHSF1 JHSF1-CT HTM HISD
Available for pipe freezeing protection
Available for roof deicing No No No
Install by Spiral,Wrap or Cross No
Build in thermostat No No No
Cable Structure Self regulating Self regulating Self regulating Self regulating Regular (Constant wattage)
Output @10°C 3w/ft 5w/ft 5w/ft 3w/ft 7w/ft Constant
Used on not always water filled pipes No
Length of cold lead 2ft 3ft 6ft No 2ft
Water proof grade(end seal) IP65 IP65 IP68 No IP65
Water proof grade(connection) IP65 IP65 IP65 No IP65

Tips

  • Never alter or cut the length of the heating cable in any way. Any alteration may result in electrical shock or fire.
  • Cable should not run through the building walls, ceilings or floors.
  • Never use metal binding to secure heating cable to pipe.
  • The thermostat and the entire heating cable has to be in contact with the tape.

Testing the cable before the installation.

Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes.

Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
...
...
...
...
...
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×