|
|
|
|
|
|
|
TotalBoat TotalTread Non-Skid Paint
|
TotalBoat Wet Edge Topside Paint
|
TotalBoat Wet Edge Cold Cure Topside Paint
|
TotalBoat Aluminum Boat Topside Paint
|
TotalBoat TotalBilge Epoxy Bilge Paint
|
Primary Uses for TotalBoat Topside Paints
|
Provides a non-slip surface on decks, docks, ramps, steps, walkways, gangways, cabin soles, & other topside surfaces.
|
Provides a beautiful, high-gloss, UV-stable finish with maximum abrasion resistance on hulls and other topside surfaces.
|
Provides a beautiful, high-gloss, UV-stable finish with maximum abrasion resistance on hulls and other topside surfaces. Can be applied in temperatures as low as 45°F.
|
Provides a durable, corrosion-resistant, low-sheen finish on aluminum and galvanized metal boats. No priming necessary. Ideal for aluminum duck boats, bass boats, canoes, jon boats, layout boats, dinghies, & pontoon boats.
|
Provides a durable, high-gloss protective coating for bilges, bulkeads, and locker areas. Epoxy-based formula is solvent and mildew resistant. Won't mildew, stain, or lift.
|
Usage
|
Exterior, above the waterline
|
Exterior, above the waterline. Not designed for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
|
Exterior, above the waterline. Not designed for continuous submersion on boat bottoms that remain in the water longer than 72 hours.
|
Exterior, above or below the waterline.
|
Interior
|
Substrates
|
Fiberglass, wood, and previously painted surfaces in good condition, and properly prepped and primed metals.
|
Wood, fiberglass, and previously painted surfaces in good condition. Can be applied to aluminum and steel substrates if prepped & primed properly.
|
Wood, fiberglass, and previously painted surfaces in good condition. Can be applied to aluminum and steel substrates if prepped & primed properly.
|
Aluminum, galvanized metal.
|
Wood, fiberglass, and previously painted surfaces in good condition.
|
Application Temperature / RH
|
50°F to 90°F / 0-90%
|
50°F to 90°F / 0-90%
|
45°F to 70°F / 0-90% (do not use within 5° of the dew point).
|
50-90°F
|
50°F to 90°F / 0-90%
|
Application Method
|
Brush or roller
|
Brush, roll and tip, or spray
|
Brush, roll and tip, or spray
|
Brush, roll, or spray
|
Brush, roll, or spray
|
Finish
|
Flat, textured
|
High gloss, smooth (flat finish available in White, Black, and Gray)
|
High gloss
|
Low sheen, non-reflective
|
High gloss, smooth
|
Thinner/Reducer
|
TotalBoat Special Brushing Thinner 100, 5-10%, if needed
|
Brush/roll – TotalBoat Special Brushing Thinner 100, 5-10%; Spray – xylene, 15-20%
|
Brush/roll – TotalBoat Special Brushing Thinner 100, 5-10%; Spray – xylene, 15-20%
|
Water, up to 20% maximum.
|
Brush/roll application - If needed, TotalBoat Special Brushing Thinner 100; Spray application - thin with xylene
|
Cleanup
|
TotalBoat Special Brushing Thinner 100 or TotalBoat Dewaxer & Surface Prep
|
TotalBoat Special Brushing Thinner 100 or TotalBoat Dewaxer & Surface Prep
|
TotalBoat Special Brushing Thinner 100 or TotalBoat Dewaxer & Surface Prep
|
Clean up with soap and water before Aluminum Boat Paint cures.
|
TotalBoat Special Brushing Thinner 100, xylene, or TotalBoat Dewaxer & Surface Prep
|
Coverage
|
250-300 sq. ft./gal.
|
250-300 sq. ft./gal.
|
80-100 sq. ft./qt.
|
80-100 sq. ft./qt.
|
80-100 sq. ft./qt. or 250-300 sq. ft./gal.
|
Sizes / Colors (*All colors not available in all sizes)
|
Quart, Gallon / Sand Beige, White, Gray. NOTE: These colors match TotalBoat Wet Edge Topside Paint colors Sand Beige, White, and Kingston Gray. NEW COLOR! Light Gray (lighter and less 'blue' in tone than Kingston Gray).
|
*Pint, Qt, *Gal. / Aqua Mist, Black, Blue-Glo White, Classic Whaler Blue, Bristol Beige, Sand Beige, Fighting Lady Yellow, Fire Red, Flag Blue, Hatteras Off-White; Kingston Gray, Largo Blue, Off-White, Oyster White, Sea Foam, Sea Green, White, Yellow
|
Quart / White, Oyster White, Flag Blue, Sea Foam, Sea Green, Fire Red
|
Quart / Army Green, Earth Brown, Khaki, Black, Light Gray, White
|
Quart, Gallon / Gray, White
|