All Systems Diagnostic

1. Engine System:Read and erase Fault Codes,Check Engine light, I/M Readiness, Show Live Data Stream in Graph with 2 channel, On-board monitoring,Read Freeze Frame and retrieve Vehicle Information.
2. Transmission system:Vehicles need a transmission to transfer the power from the engine to the drive shaft and the differential to let the wheels turn. The transmission varies the torque, the speed and the direction by changing the transmission ratios and enables the car to start with a high torque.Our FX4000 Scan tool can help before transmission problems become a big hassle. As the most common Trouble Codes come from the transmission of your vehicle. With a transmission diagnostic tool, it will send you a fault code if any. All you need to do is to fix an error code.
3. ABS System: Anti-lock braking systems (ABS) help you steer in emergencies by restoring traction to your tires. What It Does: Helps prevent wheels from locking up – possibly allowing the driver to steer to safety.Use Our FX4000 ABS Code Reader to read and clear the error codes for the ABS to keep your ABS alway in working condition.
4. SRS System:The Supplementary Restraint System (SRS) is basically an air-bag system. This works together with conventional 3-point seat belts and prevents impact of the driver's chest and face with the steering wheel in the event of a collision.Use the FX4000 to read and clear the error codes for the SRS to avoid the situation that the airbags won’t work in an accident.
5. SAS System:The steering angle sensor (SAS) determines where the driver wants to steer, matching the steering wheel with the vehicle's wheels,Our FX4000 scan tool can read and clear the fault codes of the SAS (Steering Angle Sensor) when the SAS indicator display on the dashboard
6. Immobilizer System:With the help of Immobilizer System, you can keep your car safe, secure and prevent it from being stolen.
7. TCM System:Allow you to erase Transmission control module (TCM) Trouble codes from the Failure Records when No fault detected during car ignition.
8. 4WD System:Help you monitor the condition of your Four-wheel drive (4WD) which is designed to send torque to all four of a vehicle's wheels to increase traction when needed.4WD might be the better choice for those who live in remote areas, need to work in extreme weather conditions, or enjoy off-road adventuring.
9. EKPS System: The electronic fuel pump control module (EKPS ) controls the fuel pump.EKPS module can fail to cause no start problem or cause issues under hard acceleration. Our Ancel FX4000 obd2 scanner can help you erase the fault code after you fixed the problem.
10. HVAC System:Read and Erase any air-conditioning codes,Some issues relating to how the vehicle runs that could affect HVAC performance.
11. Window System:Help you to diagnose your window issue on your car and Protect the your property from being stolen.
12. Headlight System:Diagnostic the condition of your headlight or called Headlamps,let you drive through dark tunnels, or low light parking garage without worry about the light will turn off Suddenly.
13. Audio System:Diagnostic your audio on your car,if with problem,just fixed it so that you can enjoy better sound all the time.
14. Notice:Each car model has different system configurations, the diagnosis system may Vary.

Special Function:

1. EPB (Electrical Park Brake) :This function has a multitude of usages to maintain the electronic braking system safely and effectively. The applications include deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.
2. Oil Reset:This function allows you to perform reset for the Engine Oil Lift system, which calculations An optional oil life change interval depending on the vehicle driving conditions and climates. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.
3. ABS Bleeding:Whenever you change a part of the brake system, you will need to bleed the brake system afterward.This means removing all the air in the system. The reason you have to bleed the brakes is that air is compressible and if there is air in the system, then the brake pedal will feel soft. The reason the brake pedal will be soft and mushy is that the air will have to be pushed out of the way before the fluid can do what it is supposed to do.This can be dangerous because it means that it will take longer to stop. Most of the time bleeding brakes isn’t too hard, but what if air gets in the ABS Module. Well, bleeding the ABS module can be a bit more of a challenge.You need takes this special tool to cycle the valves in the ABS module to let the air out.

Full OBD II modes :

Read and Erase Codes: Read current trouble code and data,clear and check engine light codes including generic, manufacturer-specific, and pending codes.

View Data Stream: Displays live data stream in graphs with 2 channel, allows you to compare live readings to find out suspicious parameters.you can see your vehicle’s essential information like RPM, speed, and oil temperature in real-time to help identify and correct problems.

Read Freeze Frame: Display freeze frame data,able to store and playback

I/M Readiness Test: Quick State Emissions readiness check and drive cycle verification (Non-continuously monitored system test )

On-board monitoring test: allowing access to the results for on-board diagnostic monitoring tests of specific components/systems that are either continuously monitored (e.g. misfire monitoring) or non-continuously monitored systems

Read System Information: retrieve vehicle information,Include Vehicle Identification Number,Calibration IDs,Calibration Verification Number (VIN, CIN, and CVN).