Super PDR 91Pcs PDR Rod Tools Kit Professional Hail Damage Door Ding Repair Kit Car Auto Body Paintless Dent Repair Removal Tool Set PDR Dent Puller kit Slide Hammer Push Rods

Professional Super PDR Stainless Steel PDR rod hail damage repair kit suits for professional technicians to repair car dent hail damage and door dings.

Rod materials:carbon stainless & rubber coating on the hand shake,high carbon steel forging,high hardness and duralility,will resist corrosion and antirust.

Wide usage:Our PDR Tool is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine Body etc

Yellow Glue Sticks has a strong viscosity,suitable for the relatively harder parts on cars; White glue sticks is a very ordinary in stickness sticks,suitable for not very hard parts on cars; Black Glue Sticks is Suitable for Relatively Soft on Car

The dent lifter Made from light weight aluminum then powder coated.Padded feet add support for maximum pulling power while not denting surrounding areas.Hand unit allows for controlled leverage while removing dents.

size:

91pcs

Retail Price: $ 299.99

Wholesale Price: Inquire Now

Super PDR ---A trustworthy brand in PDR Tools

Super PDR is a professional manufacturer and honest seller for many years
We focus on quality is second to none.
we protect the right of the customers.
Let's give a special gift to our lovely cars.
How to use this paintless dent repair kits?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
PACKAGE:AS THE FIRST PICTURE SHOWN.

The feature about the PDR rod kit

There are 6pcs different black rods.
The tails have 6 kinds of shapes.conveniect for different dents in different parts of a car.
The length Come with 6pcs Black rods and 2pc hooks,2pc Chain,2pc iron ring;Rods Dimension:2pcs 52cm/20;39cm/15.4in;34cm/13.4in;31cm/12.2in;27cm/10.6in
The diameter is from 5mm to 8mm.the thickness of the longer rod is thicker.no worry about being crook.
The handles are easy to use and convenient to operate.
The materials is stainless steel, won't easy to bent and rust.

The feature about the golden dent lifter

Made from light weight aluminum then powder coated.
Padded feet add support for maximum pulling power while not denting surrounding areas.
Hand unit allows for controlled leverage while removing dents.

How to use PDR tools

Use the LIGHT reflect board to check where are the dents.When the light reflect on the surface,The place where the line is bent is where the dent lies.
When glue is melt by the glue gun,put the glue on the tab,and put the tab on the dent.

Wide Use Range---The glue gun and glue sticks can be used to repair circuit board,remove the dent, paste the handicrafts and so on.
High-Quality glue gun ---100-Watt of Power 100v-240v Wall plug Glue Gun is made by advanced engineering plastic,copper nozzle,light weight, long time life.
Good glue sticks---the yellow glue has the strongest viscosity,suit for harder parts,and the white glue has a relatively strong viscosity.they have a low melting points,the best melt time is 5-8 mins.
NOTE:
Use enough glue to create a glue cushion of about 1-2 millimeters between the metal and the puller pad.
It's fairly important to press it quickly to operation surface.
DO NOT let the glue harden completely. It will just break off when you pull the dent. As you pull the dent you should see the glue stretch slightly, and there will be a distinctive metal popping sound if you do it properly.
The timing for the glue set will also depend on temperature and humidity.Cool weather may take even less than 60 seconds.

spring rings to save labor,special for bigger dents.
can also work as a mini dent puller,so convenient.
suit for all sizes glue tabs.
high elastic stainless steel,has a long life.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Super PDR 91Pcs PDR Rod Tools Kit Professional Hail Damage Door Ding Repair Kit Car Auto Body Paintless Dent Repair Removal Tool Set PDR Dent Puller kit Slide Hammer Push Rods

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Super PDR ---A trustworthy brand in PDR Tools

Super PDR is a professional manufacturer and honest seller for many years
We focus on quality is second to none.
we protect the right of the customers.
Let's give a special gift to our lovely cars.
How to use this paintless dent repair kits?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
PACKAGE:AS THE FIRST PICTURE SHOWN.

The feature about the PDR rod kit

There are 6pcs different black rods.
The tails have 6 kinds of shapes.conveniect for different dents in different parts of a car.
The length Come with 6pcs Black rods and 2pc hooks,2pc Chain,2pc iron ring;Rods Dimension:2pcs 52cm/20;39cm/15.4in;34cm/13.4in;31cm/12.2in;27cm/10.6in
The diameter is from 5mm to 8mm.the thickness of the longer rod is thicker.no worry about being crook.
The handles are easy to use and convenient to operate.
The materials is stainless steel, won't easy to bent and rust.

The feature about the golden dent lifter

Made from light weight aluminum then powder coated.
Padded feet add support for maximum pulling power while not denting surrounding areas.
Hand unit allows for controlled leverage while removing dents.

How to use PDR tools

Use the LIGHT reflect board to check where are the dents.When the light reflect on the surface,The place where the line is bent is where the dent lies.
When glue is melt by the glue gun,put the glue on the tab,and put the tab on the dent.

Wide Use Range---The glue gun and glue sticks can be used to repair circuit board,remove the dent, paste the handicrafts and so on.
High-Quality glue gun ---100-Watt of Power 100v-240v Wall plug Glue Gun is made by advanced engineering plastic,copper nozzle,light weight, long time life.
Good glue sticks---the yellow glue has the strongest viscosity,suit for harder parts,and the white glue has a relatively strong viscosity.they have a low melting points,the best melt time is 5-8 mins.
NOTE:
Use enough glue to create a glue cushion of about 1-2 millimeters between the metal and the puller pad.
It's fairly important to press it quickly to operation surface.
DO NOT let the glue harden completely. It will just break off when you pull the dent. As you pull the dent you should see the glue stretch slightly, and there will be a distinctive metal popping sound if you do it properly.
The timing for the glue set will also depend on temperature and humidity.Cool weather may take even less than 60 seconds.

spring rings to save labor,special for bigger dents.
can also work as a mini dent puller,so convenient.
suit for all sizes glue tabs.
high elastic stainless steel,has a long life.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.