3/4" C1216 Flat Washer (ID .766, OD 1.312, Thick 3/32) 18-8 SS - Qty-25

[]

Retail Price: $ 18.21

Wholesale Price: Inquire Now

AN960C 900 Series Flat Washers

Flat washers are used to support and spread the load across the baring area of the bolt and nut to prevent pull through
AN960C 900 series flat washers are available in standard and light (L) thicknesses
AN900 series flat washers meet standards for the navy and airforce, which is where the washers receive the "AN" name
18-8 Stainless steel is corrosion resistant, durable, and suitable for freshwater applications

Description

Flat washers are positioned beneath the head of a screw or bolt on an assembly. They are used to distribute the force of an assembly over a wider area. A flat washer is a round outer diameter thin plate with a center hole (inner diameter) punched to the size of the bolt or screw size. Flat washers are normally used to distribute loads of threaded bolts, screws, and nuts evenly as the fastener is tightened.

Product Specifications

Material: 18-8 Stainless Steel

Sizing Specifications

Washer Size: ID (Inner Diameter), OD (Outer Diameter), Thickness

#2 C2: 0.099" ID, 1/4" OD, 1/32" Thickness
#2 C2L: 0.099" ID, 1/4" OD, 1/64" Thickness
#3 C3: 0.109" ID, 1/4" OD, 1/32" Thickness
#3 C3L: 0.109" ID, 1/4" OD, 1/64" Thickness
#4 C4: 0.125" ID, 0.312" OD, 1/32" Thickness
#4 C4L: 0.125" ID, 0.312" OD, 1/64" Thickness
#5 C5: 0.140" ID, 0.438" OD, 3/64" Thickness
#6 C6: 0.149" ID, 0.375" OD, 1/32" Thickness
#6 C6L: 0.149" ID, 0.375" OD, 1/64" Thickness
#8 C8: 0.174" ID, 0.375" OD, 1/32" Thickness
#8 C8L: 0.174" ID, 0.375" OD, 1/64" Thickness
#10 C10: 0.203" ID, 0.437" OD, 1/16" Thickness
#10 C10L: 0.203" ID, 0.437" OD, 1/32" Thickness
1/4" C416: 0.265" ID, 0.500" OD, 1/16" Thickness
1/4" C416L: 0.265" ID, 0.500" OD, 1/32" Thickness
5/16" C516: 0.328" ID, 0.562" OD, 1/16" Thickness
5/16" C516L: 0.328" ID, 0.562" OD, 1/32" Thickness
3/8" C616: 0.390" ID, 0.625" OD, 1/16" Thickness
3/8" C616L: 0.390" ID, 0.625" OD, 1/32" Thickness
7/16" C716: 0.453" ID, 0.750" OD, 1/16" Thickness
7/16" C716L: 0.453" ID, 0.750" OD, 1/32" Thickness
1/2" C816: 0.516" ID, 0.875" OD, 1/16" Thickness
1/2" C816L: 0.516" ID, 0.875" OD, 1/32" Thickness
9/16" C916: 0.578" ID, 1.062" OD, 1/16" Thickness
9/16" C916L: 0578" ID, 1.062" OD, 1/32" Thickness
5/8" C1016: 0.641" ID, 1.187" OD, 1/16" Thickness
5/8" C1016L: 0.641" ID, 1.187" OD, 1/32" Thickness
3/4" C1216: 0.766" ID, 1.312" OD, 3/32" Thickness

Listing photo is generic for the fastener type listed in this listing and is not to scale. Please refer to the description for fastener details. If in doubt, please ask a question through chat or email. We will respond with the requested information quickly.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

3/4" C1216 Flat Washer (ID .766, OD 1.312, Thick 3/32) 18-8 SS - Qty-25

BEST SELLERS

Product introduction

Shipping Notices

Product Description

AN960C 900 Series Flat Washers

Flat washers are used to support and spread the load across the baring area of the bolt and nut to prevent pull through
AN960C 900 series flat washers are available in standard and light (L) thicknesses
AN900 series flat washers meet standards for the navy and airforce, which is where the washers receive the "AN" name
18-8 Stainless steel is corrosion resistant, durable, and suitable for freshwater applications

Description

Product Specifications

Material: 18-8 Stainless Steel

Sizing Specifications

Washer Size: ID (Inner Diameter), OD (Outer Diameter), Thickness

#2 C2: 0.099" ID, 1/4" OD, 1/32" Thickness
#2 C2L: 0.099" ID, 1/4" OD, 1/64" Thickness
#3 C3: 0.109" ID, 1/4" OD, 1/32" Thickness
#3 C3L: 0.109" ID, 1/4" OD, 1/64" Thickness
#4 C4: 0.125" ID, 0.312" OD, 1/32" Thickness
#4 C4L: 0.125" ID, 0.312" OD, 1/64" Thickness
#5 C5: 0.140" ID, 0.438" OD, 3/64" Thickness
#6 C6: 0.149" ID, 0.375" OD, 1/32" Thickness
#6 C6L: 0.149" ID, 0.375" OD, 1/64" Thickness
#8 C8: 0.174" ID, 0.375" OD, 1/32" Thickness
#8 C8L: 0.174" ID, 0.375" OD, 1/64" Thickness
#10 C10: 0.203" ID, 0.437" OD, 1/16" Thickness
#10 C10L: 0.203" ID, 0.437" OD, 1/32" Thickness
1/4" C416: 0.265" ID, 0.500" OD, 1/16" Thickness
1/4" C416L: 0.265" ID, 0.500" OD, 1/32" Thickness
5/16" C516: 0.328" ID, 0.562" OD, 1/16" Thickness
5/16" C516L: 0.328" ID, 0.562" OD, 1/32" Thickness
3/8" C616: 0.390" ID, 0.625" OD, 1/16" Thickness
3/8" C616L: 0.390" ID, 0.625" OD, 1/32" Thickness
7/16" C716: 0.453" ID, 0.750" OD, 1/16" Thickness
7/16" C716L: 0.453" ID, 0.750" OD, 1/32" Thickness
1/2" C816: 0.516" ID, 0.875" OD, 1/16" Thickness
1/2" C816L: 0.516" ID, 0.875" OD, 1/32" Thickness
9/16" C916: 0.578" ID, 1.062" OD, 1/16" Thickness
9/16" C916L: 0578" ID, 1.062" OD, 1/32" Thickness
5/8" C1016: 0.641" ID, 1.187" OD, 1/16" Thickness
5/8" C1016L: 0.641" ID, 1.187" OD, 1/32" Thickness
3/4" C1216: 0.766" ID, 1.312" OD, 3/32" Thickness

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.