Hardwired Smoke Alarm, 10 Years Photoelectric Sensor Smoke Alarm, Interconnect up to 12 pcs with 9V Back up Battery, Mute Function for Home School and Hotel
Weekly testing:Test the unit to ensure proper operation by pressing the test button for at least 5 seconds to sound the alarm.
Alarm silence (hush mode):When you push the combination Test/Silence button for at least 5 seconds to active silence control, the alarm will enter to hush mode for approx 8 minutes,help you mutes unnecessary alarms immediately.
RED/GREEN INDICATORS
Illumination of the Green LED indicates that the alarm is receiving AC power.
Red LED:
flash once per second: When the test button is pressed or the smoke alarm sense particles of combustion and go into alarm
flash every 8 seconds: Indicating the smoke alarm is in the alarm silencer (Hush) mode.
>85 dB(A) at 3 METERS
Vodool Photoelectric Smoke Alarm features a loud 85-decibel horn.The alarm horn is loud & send clear warning to alert individuals to a potential danger. Help them to escape early.
Sound Pattern: Temporal 3(BI 0.5s - pause 0.5s -BI 0.5s - pause 0.5s - BI 0.5s - pause 1.5s, with concurrent RED LED flash, pattern repeats until alarm clears or is silenced)
MISSING BATTERY GUARD
This smoke alarm is designed for hardwired installation,but it also equipment with a backup battery,the missing battery guard design will help ensure your safety from power outage.
The unit comes with a 9-volt battery and features a pivoting,easy-to-access battery drawer that allows you to replace the battery without dismounting the alarm.
PHOTOELECTRIC SMOKE ALARM IS FAR MORE SENSITIVE AND EFFECTIVE THAN IONIZATION SMOKE ALARM
Ionization Smoke alarm
Inside the smoke alarm,there are two tiny metal plates called electrodes that are connected to a battery.This is called a circuit.
There is also a substance called Americium-241.Americium-241converts air molecules into positive and negative ions.Because opposites attract,the negative ions move toward the positive ions move toward the negative plate.This movement creates a complete circuit or path of electricity.
When smoke enters the smoke alarm, the ions bond with the smoke,breaking the path of electricity.
When the flow of electricity is reduced,the alarm goes off.
Photoelectric Smoke alarm
Inside the smoke alarm, there is a LED light that sends a beam of light (similar to a laser pointer) in a separate compartment inside the chamber, there is a photosensor that detects light.
As smoke enters the detector, the smoke particles interrupt the light beam, scattering it in many directions. Some of the LED light scatters toward the light sensor. When light beams hit the sensor, the alarm will go off!
When the batteries in your smoke alarm get low, the smoke alarm automatically activates a low battery chirping sound different from the alarm sound so you know it's time to get new batteries.
Photoelectric sensors are set off when smoke enters the alarm and deflects the light of an LED beam onto a photocell. For slow, smoky, smoldering fires, photoelectric alarms are far more sensitive and effective.
Choose a photoelectric model as our primary choice, killing the fire at the begining.
INTERCONNECT UP TO 12PCS
A smoke alarm will not promptly detect a fire except in the area or room in which it is installed. This is one of the main reasons for the recommendation to install multiple alarms at home. As an added safety feature the VODOOL smoke alarm includes an interconnect feature that facilitates all smoke alarms in the home to sound an alarm when any one alarm detects smoke.
This smoke alarm can also integrate with up to 12 other VODOOL hardwired alarms for coverage of larger spaces.
The alarm features a latching indicator to identify which unit triggered the alarm, alerting you to the area of danger.
DC 9V battery operated
Photoelectric Alarm chamber for early alarm from all directions
Hardwired Smoke Alarm, 10 Years Photoelectric Sensor Smoke Alarm, Interconnect up to 12 pcs with 9V Back up Battery, Mute Function for Home School and Hotel
Hardwired Smoke Alarm, 10 Years Photoelectric Sensor Smoke Alarm, Interconnect up to 12 pcs with 9V Back up Battery, Mute Function for Home School and Hotel
Weekly testing:Test the unit to ensure proper operation by pressing the test button for at least 5 seconds to sound the alarm.
Alarm silence (hush mode):When you push the combination Test/Silence button for at least 5 seconds to active silence control, the alarm will enter to hush mode for approx 8 minutes,help you mutes unnecessary alarms immediately.
RED/GREEN INDICATORS
Illumination of the Green LED indicates that the alarm is receiving AC power.
Red LED:
flash once per second: When the test button is pressed or the smoke alarm sense particles of combustion and go into alarm
flash every 8 seconds: Indicating the smoke alarm is in the alarm silencer (Hush) mode.
>85 dB(A) at 3 METERS
Vodool Photoelectric Smoke Alarm features a loud 85-decibel horn.The alarm horn is loud & send clear warning to alert individuals to a potential danger. Help them to escape early.
Sound Pattern: Temporal 3(BI 0.5s - pause 0.5s -BI 0.5s - pause 0.5s - BI 0.5s - pause 1.5s, with concurrent RED LED flash, pattern repeats until alarm clears or is silenced)
MISSING BATTERY GUARD
This smoke alarm is designed for hardwired installation,but it also equipment with a backup battery,the missing battery guard design will help ensure your safety from power outage.
The unit comes with a 9-volt battery and features a pivoting,easy-to-access battery drawer that allows you to replace the battery without dismounting the alarm.
PHOTOELECTRIC SMOKE ALARM IS FAR MORE SENSITIVE AND EFFECTIVE THAN IONIZATION SMOKE ALARM
Ionization Smoke alarm
Inside the smoke alarm,there are two tiny metal plates called electrodes that are connected to a battery.This is called a circuit.
There is also a substance called Americium-241.Americium-241converts air molecules into positive and negative ions.Because opposites attract,the negative ions move toward the positive ions move toward the negative plate.This movement creates a complete circuit or path of electricity.
When smoke enters the smoke alarm, the ions bond with the smoke,breaking the path of electricity.
When the flow of electricity is reduced,the alarm goes off.
Photoelectric Smoke alarm
Inside the smoke alarm, there is a LED light that sends a beam of light (similar to a laser pointer) in a separate compartment inside the chamber, there is a photosensor that detects light.
As smoke enters the detector, the smoke particles interrupt the light beam, scattering it in many directions. Some of the LED light scatters toward the light sensor. When light beams hit the sensor, the alarm will go off!
When the batteries in your smoke alarm get low, the smoke alarm automatically activates a low battery chirping sound different from the alarm sound so you know it's time to get new batteries.
Photoelectric sensors are set off when smoke enters the alarm and deflects the light of an LED beam onto a photocell. For slow, smoky, smoldering fires, photoelectric alarms are far more sensitive and effective.
Choose a photoelectric model as our primary choice, killing the fire at the begining.
INTERCONNECT UP TO 12PCS
A smoke alarm will not promptly detect a fire except in the area or room in which it is installed. This is one of the main reasons for the recommendation to install multiple alarms at home. As an added safety feature the VODOOL smoke alarm includes an interconnect feature that facilitates all smoke alarms in the home to sound an alarm when any one alarm detects smoke.
This smoke alarm can also integrate with up to 12 other VODOOL hardwired alarms for coverage of larger spaces.
The alarm features a latching indicator to identify which unit triggered the alarm, alerting you to the area of danger.
DC 9V battery operated
Photoelectric Alarm chamber for early alarm from all directions
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.