Screen Replacement for iPhone 6 Plus (5.5') - LCD Display Touch Digitizer Frame Assembly Set with Proximity Sensor, Front Camera, Earpiece, Tempered Glass, Repair Tools and Instruction (White)

【 COMPATIBILITY】 ONLY for iPhone 6 plus (5.5 inch screen), does NOT work with 6S Plus 5.5 inch . For Model A1522, A1524, A1593, you can check on the backside of your phone, please do not confuse it with other versions

【EASY INSTALLATION】 Preassembled proximity sensor, earpiece speaker, front camera. WITHOUT home button which you need to swap from your original iPhone 6 plus LCD screen to maintain the TOUCH ID function.

【GREAT REPLACEMENT】 USE to replace faulty,defective,cracked,dead iPhone 6 plus display screen full assembly. Easy to install and save big time . All the tool kits required to replace the screen are included in the package (spudger, screwdrivers, suction cup, and opening tool, no more extra items need to buy).

【QUALITY GUARANTEE】All iPhone 6 plus screen in 7iper pass strict technical tests before shipping to avoid happening of the black screen,ghost touch, stripe lines before shipping .180 days warranty for non-human factors. Full REFUND or REPLACEMENT service without ask any question, bz of quality.

【Packing】iPhone 6 plus screen replacement full assembly set, Instruction, 9H hardness tempered glass screen protector and Repair tools same with the picture shows are included.

color:

White

Retail Price: $ 34.99

Wholesale Price: Inquire Now

Note:
Only fit for iPhone 6 Plus 5.5" (A1522, A1524, A1593), NOT for iPhone 6S plus.
The new screen were pre-assembled. Including front facing camera, earpiece speaker,Proximity Sensor and the LCD shield plate (WITHOUT Home button).
You will not need to transfer these parts from your old display assembly to your new part.Convenient for replacing and installing, Saving time and low risk.

Installation Notice:

Choose the RIGHT model and color
Make sure already disconnect battery cable or power off before installation. It could save your phone from short circuit or incorrect installation damage.
Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully !
There are many scres when you replacing the assembly which are different in size and length. Make sure each screw are installed back to its ORIGINAL hole
Follow the Operation Guide or video online step by step if you are Beginner

TroubleShoot help:
1. If your phone have some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps:

Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.
Restart your phone: press home button and power button simultaneously till the phone shut down, after few mins, turn the phone on.

2. If the Ear Speaker, Front Camera or Proximity Sensor is not working after install new screen, please change them from your old screen to new screen.
3. If the Home Button or the finger print ID is not working as well, please change the lcd metal back plate with long flex cable from your old screen to the new screen.

Give your iphone a brand new look, Repair it yourself now.

Easy to install and save big time . Save your cracked screen
Repair the broken, old, damaged,scratched, faulty LCD display touch screen
Solver the rea speaker issues
Repair the cracked front camera
High respose sensitiyity
Hight clarity, perfect feeling

What you will receive

1 x lcd touch screen+digitizer assembly
1 x High Qulity Repair Tools Set
1 x Non-Dust Cloth
1 x Sim Card Pin
1 x Hardness Tempered Glass
1 x Instructions


Pre-assembled All of the small components are pre-assembled in one piece,very convenient to replace and install. 1.LCD display touch screen 2.Digitizer touch panel assembly 3.Bezel frame 4.Front camera 5.Ear speaker 6.Front microphone 7.Light sensor 8.Proximity sensor	Without Home button There is no home button connector, but it's not including home button. Because only original home button assembly will be able to use the touch ID functionality. Installing a new home button will only restore ordinary functions, no the touch ID features.	Compatibility ONLY for iPhone 6 plus (5.5 inch screen), does NOT work with 6S plus (5.5 inch). For Model A1522, A1524, A1593 - check on the backside of your iPhone.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Screen Replacement for iPhone 6 Plus (5.5') - LCD Display Touch Digitizer Frame Assembly Set with Proximity Sensor, Front Camera, Earpiece, Tempered Glass, Repair Tools and Instruction (White)

BEST SELLERS

Product introduction

Shipping Notices

iPhone 6 plus LCD Screen and Digitizer Full Assembly.

The new screen were pre-assembled. Including front facing camera, earpiece speaker,Proximity Sensor and the LCD shield plate (WITHOUT Home button).
You will not need to transfer these parts from your old display assembly to your new part.Convenient for replacing and installing, Saving time and low risk.

Installation Notice:
1. Choose the RIGHT model and color
2. Make sure already disconnect battery cable or power off before installation. It could save your phone from short circuit or incorrect installation damage.
3. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
4. The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully !
5. There are many scres when you replacing the assembly which are different in size and length. Make sure each screw are installed back to its ORIGINAL hole
6. Follow the Operation Guide or video online step by step if you are Beginner(also easy to install)

Package including:
1 x lcd touch screen+digitizer assembly
1 x High Qulity Repair Tools Set
1 x Non-Dust Cloth
1 x Sim Card Pin
1 x Hardness Tempered Glass
1 x Instructions

TroubleShoot help:
If your phone have some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.
2. Restart your phone: press home button and power button simultaneously till the phone shut down, after few mins, turn the phone on.

Product Description

Choose the RIGHT model and color
Make sure already disconnect battery cable or power off before installation. It could save your phone from short circuit or incorrect installation damage.
Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully !
There are many scres when you replacing the assembly which are different in size and length. Make sure each screw are installed back to its ORIGINAL hole
Follow the Operation Guide or video online step by step if you are Beginner

TroubleShoot help:
1. If your phone have some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps:

Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.
Restart your phone: press home button and power button simultaneously till the phone shut down, after few mins, turn the phone on.

Give your iphone a brand new look, Repair it yourself now.

Easy to install and save big time . Save your cracked screen
Repair the broken, old, damaged,scratched, faulty LCD display touch screen
Solver the rea speaker issues
Repair the cracked front camera
High respose sensitiyity
Hight clarity, perfect feeling

What you will receive

1 x lcd touch screen+digitizer assembly
1 x High Qulity Repair Tools Set
1 x Non-Dust Cloth
1 x Sim Card Pin
1 x Hardness Tempered Glass
1 x Instructions


Pre-assembled All of the small components are pre-assembled in one piece,very convenient to replace and install. 1.LCD display touch screen 2.Digitizer touch panel assembly 3.Bezel frame 4.Front camera 5.Ear speaker 6.Front microphone 7.Light sensor 8.Proximity sensor	Without Home button There is no home button connector, but it's not including home button. Because only original home button assembly will be able to use the touch ID functionality. Installing a new home button will only restore ordinary functions, no the touch ID features.	Compatibility ONLY for iPhone 6 plus (5.5 inch screen), does NOT work with 6S plus (5.5 inch). For Model A1522, A1524, A1593 - check on the backside of your iPhone.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.