Household Essentials 18100-1 Stowaway Cabinet with Built in Ironing Board Cut into Wall to Install, White Finish

Your purchase includes One Household Essentials StowAway In-Wall Ironing Board Cabinet with Built-in Ironing board

Product max dimensions – 15.75” W x 7.75\" D x 47.45\" H | Cabinet Opened and Board Out – 28.5\" W (door open) x 44.5\" from wall (ironing board extended forward) | Board recesses into the wall – 3.5 inches

Other dimensions: Ironing Surface – 41” x 11 ¾” | Cabinet Interior – 13.25” W x 5.375” D | Top Shelf – 4.375\" D x 12\" H | Bottom Shelf: 3.5\" D x 16\" H

Ensure a proper space for installation by making sure that there will be no power lines or water pipes in your desired wall

Swiveling ironing board rotates 180 degrees for right or left-handed ironing: Adjust bolt under board to tighten or loosen rotation; Set up requires 66\" of clearance from side to side and 44.5\" in front of cabinet for board to open and swivel

style:

White Finish

Retail Price: $ 135.99

Wholesale Price: Inquire Now

Important Considerations

Check your space:

Studs: Wood or metal is fine, but studs need to be 16-inch-on-center (that's 14.25" between them and a wall depth of at least 3.75")
Space: Must have minimum space of 28.5" wide (door open) x 44.5" in front (board open) x 66" across the front (for board swivel)
Hazards: Avoid cutting mechanical or electrical devices or wires during install
Outlet: Install near an outlet to power iron

Space-saving cabinet hides away the ironing board!

Installation Requires Cutting Into The Wall

How Do I Install This Ironing Board?

There are detailed instructions that come with the cabinet. We also highly recommend reviewing the video on this page to learn more about using and installing the Stow Away Cabinet Ironing Board.

Installation Highlights!

1. Have 16"-on-center studs in the wall.

2. Cut a rectangle out of your wall.

3. Set the cabinet inside the cutout.

4. Secure the cabinet to the studs (wood or metal is fine, but we only provide hardware for wood).

Can this be mounted to the wall instead of in it?

No. This cabinet must be installed into the wall. That's how to support the unit against the force and torque of opening and using the swivel ironing board!

Check out our Iron 'n Fold Cabinet for an option that you attach to the wall (it sits on the floor).


Height adjust even after installation. Board opens 10" above the bottom of the cabinet, so adjust your cabinet cutout to fit the height you want! Note: If Cutout = 25" off the floor, then board will be approx. 36-38" high. Then, once it's installed, the board can be lifted 2" higher thanks to the innovated inside height adjust! Just grab the board on either side near the back and lift it along the glides.	Right and left-handed comfort. The Stow Away ironing board rotates 90 degrees to the right and to the left. Tighten or loosen how easily it swivels by adjusting the nut on the underside of the board. Note: Needs 60" of horizontal wall space for full range of motion. Note: Replacement Stow Away covers fit most in-wall ironing boards with an ironing surface 40-42” long x 11.5”-12” wide.	Shelving and clothing hook. Heat-resistant plates to safely store warm iron. 2 storage shelves for accessories. Hanging hook for keeping ironing clothes fresh! Top Shelf: 12"H x 13.25"W x 4.375"D. Bottom Shelf: 16"H x 13.25"W x 3.5"D.


Cut a hole into the wall. Cut a hole in the wall--between 16"-on-center studs--that is that is 46.25" tall x 14.25". Choose the height of the cutout based on where you want the board to open. Board opens 10" above the bottom of the cabinet, or about 9" above the bottom of the cutout.	Set cabinet into cutout. Before putting the cabinet in, pre drill the holes on the frame where the door will install. Then, carefully lift cabinet into cutout, setting the cabinet into the bottom first, then pushing the cabinet flush into the hole.	Secure cabinet to framing studs. Secure the cabinet to the frame studs. Screw right under the shelves. Hardware for wood studs is included. For metal studs, please visit your local hardware store for the right screws!	Install the door! Attach hinges to the door. Lift and align the door with the holes you drilled into the cabinet frame. (Best with 2 people!) Screw the hinges to the cabinet to attach the door.


	Stow Away In-wall Cabinet Ironing Board \| White	Stow Away In-wall Cabinet Ironing Board \| Oak	Iron 'n Fold Floor-standing Cabinet Ironing Board \| White
Installation	Cut into the wall, between 16-on-center studs	Cut into the wall, between 16-on-center studs	Attaches to the wall, like a picture frame
Cutout Dimensions	14.25" wide x 46.25" high rectangle, approx. 25" above floor (for board height = approx. 36-38" high)	14.25" wide x 46.25" high rectangle, approx. 25" above floor (for board height = approx. 36-38" high)	N/A
Door Mount	Right or Left	Right or Left	Pre-installed sliding left; Can be flipped to open right)
Shelves	2: Top 12" H x 13.25" W x 4.375" D & Bottom 16" H x 13.25" W x 3.5" D	2: Top 12" H x 13.25" W x 4.375" D & Bottom 16" H x 13.25" W x 3.5" D	None: Cabinet top as ledge
Ironing Board Material	MDF; swivels 180 degrees	MDF; swivels 180 degrees	Steel Mesh; forward position
Cover & Pad / Ironing Surface Dimensions	41 x 11.75 (Replacement: 2015, 2017, 2019)	41 x 11.75 (Replacement: 2015, 2017, 2019)	14 x 41 (Replacement: 2010-01, 2010-02)
Cabinet Dimensions	47.75 H x 15.75 W x 7.75 D (recesses 3.5 into wall)	47.75 H x 15.75 W x 7.75 D (recesses 3.5 into wall)	48.5 H x 18.5 W x 5.375 D
Ironing Height	10" above bottom of cabinet; Internal 2" height adjust after install	10" above bottom of cabinet; Internal 2" height adjust after install	Wheelchair accessible

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Household Essentials 18100-1 Stowaway Cabinet with Built in Ironing Board Cut into Wall to Install, White Finish

BEST SELLERS

Product introduction

Shipping Notices

The Household Essentials Stow Away Cabinet Ironing Board is a built-in cabinet that installs into the wall. The cabinet keeps the ironing board inside it hidden away until you are ready to iron. The cabinet installs between 16"-on center wood or metal studs (hardware included for wood studs only). Installation requires cutting a rectangle into the wall surface and setting the cabinet inside the cutout. Please Review Video for more info. This handy cabinet has an oak door and MDF interior. The wood board inside is 11.75" x 41". It folds out forward 44.5" from the wall and swivels all the way to the right and left! Ironing board opens 10" above the bottom of the cabinet and can be raised 2" after install (The board comes pre-installed inside the cabinet). The cabinet also includes two storage shelves (Top Shelf: 13.25" x 4.375" and 12" tall; Bottom Shelf: 13.25" x 3.5" and 16" tall). The top shelf fits irons with a max width or depth of 4.375", to fit on the upper shelf next to the heat-resistant plate. Hardware is included--and is packaged with the ironing board cover. Cabinet cannot be mounted to the surface of the wall; it must be set inside the wall.

From the manufacturer

Important Considerations

Check your space:

Studs: Wood or metal is fine, but studs need to be 16-inch-on-center (that's 14.25" between them and a wall depth of at least 3.75")
Space: Must have minimum space of 28.5" wide (door open) x 44.5" in front (board open) x 66" across the front (for board swivel)
Hazards: Avoid cutting mechanical or electrical devices or wires during install
Outlet: Install near an outlet to power iron

Space-saving cabinet hides away the ironing board!

Installation Requires Cutting Into The Wall

How Do I Install This Ironing Board?

There are detailed instructions that come with the cabinet. We also highly recommend reviewing the video on this page to learn more about using and installing the Stow Away Cabinet Ironing Board.

Installation Highlights!

1. Have 16"-on-center studs in the wall.

2. Cut a rectangle out of your wall.

3. Set the cabinet inside the cutout.

4. Secure the cabinet to the studs (wood or metal is fine, but we only provide hardware for wood).

Can this be mounted to the wall instead of in it?

No. This cabinet must be installed into the wall. That's how to support the unit against the force and torque of opening and using the swivel ironing board!

Check out our Iron 'n Fold Cabinet for an option that you attach to the wall (it sits on the floor).


Height adjust even after installation. Board opens 10" above the bottom of the cabinet, so adjust your cabinet cutout to fit the height you want! Note: If Cutout = 25" off the floor, then board will be approx. 36-38" high. Then, once it's installed, the board can be lifted 2" higher thanks to the innovated inside height adjust! Just grab the board on either side near the back and lift it along the glides.	Right and left-handed comfort. The Stow Away ironing board rotates 90 degrees to the right and to the left. Tighten or loosen how easily it swivels by adjusting the nut on the underside of the board. Note: Needs 60" of horizontal wall space for full range of motion. Note: Replacement Stow Away covers fit most in-wall ironing boards with an ironing surface 40-42” long x 11.5”-12” wide.	Shelving and clothing hook. Heat-resistant plates to safely store warm iron. 2 storage shelves for accessories. Hanging hook for keeping ironing clothes fresh! Top Shelf: 12"H x 13.25"W x 4.375"D. Bottom Shelf: 16"H x 13.25"W x 3.5"D.


Cut a hole into the wall. Cut a hole in the wall--between 16"-on-center studs--that is that is 46.25" tall x 14.25". Choose the height of the cutout based on where you want the board to open. Board opens 10" above the bottom of the cabinet, or about 9" above the bottom of the cutout.	Set cabinet into cutout. Before putting the cabinet in, pre drill the holes on the frame where the door will install. Then, carefully lift cabinet into cutout, setting the cabinet into the bottom first, then pushing the cabinet flush into the hole.	Secure cabinet to framing studs. Secure the cabinet to the frame studs. Screw right under the shelves. Hardware for wood studs is included. For metal studs, please visit your local hardware store for the right screws!	Install the door! Attach hinges to the door. Lift and align the door with the holes you drilled into the cabinet frame. (Best with 2 people!) Screw the hinges to the cabinet to attach the door.


	Stow Away In-wall Cabinet Ironing Board \| White	Stow Away In-wall Cabinet Ironing Board \| Oak	Iron 'n Fold Floor-standing Cabinet Ironing Board \| White
Installation	Cut into the wall, between 16-on-center studs	Cut into the wall, between 16-on-center studs	Attaches to the wall, like a picture frame
Cutout Dimensions	14.25" wide x 46.25" high rectangle, approx. 25" above floor (for board height = approx. 36-38" high)	14.25" wide x 46.25" high rectangle, approx. 25" above floor (for board height = approx. 36-38" high)	N/A
Door Mount	Right or Left	Right or Left	Pre-installed sliding left; Can be flipped to open right)
Shelves	2: Top 12" H x 13.25" W x 4.375" D & Bottom 16" H x 13.25" W x 3.5" D	2: Top 12" H x 13.25" W x 4.375" D & Bottom 16" H x 13.25" W x 3.5" D	None: Cabinet top as ledge
Ironing Board Material	MDF; swivels 180 degrees	MDF; swivels 180 degrees	Steel Mesh; forward position
Cover & Pad / Ironing Surface Dimensions	41 x 11.75 (Replacement: 2015, 2017, 2019)	41 x 11.75 (Replacement: 2015, 2017, 2019)	14 x 41 (Replacement: 2010-01, 2010-02)
Cabinet Dimensions	47.75 H x 15.75 W x 7.75 D (recesses 3.5 into wall)	47.75 H x 15.75 W x 7.75 D (recesses 3.5 into wall)	48.5 H x 18.5 W x 5.375 D
Ironing Height	10" above bottom of cabinet; Internal 2" height adjust after install	10" above bottom of cabinet; Internal 2" height adjust after install	Wheelchair accessible

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.