Product Name:
Vacuum Brazed Diamond Dry Drilling Core Bits
Quantity:
2 Pieces 08mm (5/16 Inch)
Specification:
Diameter: 8mm, Max working depth: 35mm, Diamond height: 10mm, Total Length: 62mm
6mm-16mm bits with Wax inside helps cooling the bits
**The Thread of bit is 5/8-Inch-11, Recommended Machine: angle grinder**
If you fit them on drill or other machine, you need an adapter, such as SDS, hex, Round plus shank...
Application :
Dry/wet drilling for porcelain tile, granite, marble, stone, Masonry, brick...
Feature:
1. Minimizing any breakage and safe for operator
2. High quality Diamond Grain provide fast and smooth drilling
3. Vacuum Brazed technology provide much longer working life than electroplated technology
=========THE END==========
Available Diameter: 6mm-152mm(1/6 Inch to 6 Inch).
Operation Tips for Vacuum Brazed Diamond Drill core bits
1.Do not use these drill bits with hammer mode
2.Only fit these drill bits on a cord drill, not cordless drill(no enough power)
3.Only for tile drilling not recommend for the material behind the tile
4.For horizontal drilling,just give a gentle pressure
For vertical drilling, the weight of the machine will give sufficient pressure
5.Start drilling as per following instructions:
1) Place the drill at a 45 degree angle
2) Drilling till the hole start to form
3) Bring the drill up into upright position
4) Continue to drill and swaying the machine along a circle
ABOUT SHDIATOOL:
We are a professional Manufacturer & Supplier of diamond tools in China,
If you have any needs or questions about our products,please contact us firstly, thanks,
we have good After-sales service, better quality and professional suggestions.