TUINCYN 2pcs 50W 8 ohm 7443 7444NA Led Load Resistor - Fix Headlight LED Bulb Fog Lamp Fast Hyper Flash Turn Signal Blink Light Error Code Canbus Resistors Decoder

❶ Brand New 7443 Socket/Base Type LED Load Resistors with 50W 8 Ohm high power Lights Error Free Canceller Capacitor Decoder Wire, Excellent for Heat Dissipation.

❷ Working Power: 50W 8 ohm(Higher decoding rate than 6 ohm). One LED Load Resistor for One LED Bulb.

❸ Plug& Play LED Load Resistors Fits 7443 7444NA W21W for Turn Signal Bulb Or LED License Plate Lights to Avoid Hyper Flashing- No Flashing Or Burnt Out Bulb Indications.

❹ Used for Headlight Bulb, Fog Lamp, Turn Signal Light, Daytime Running Light etc. See The Product Socket Picture And Make A Confirmation.

❺ Load Resistors Heat Up Like Light Bulbs And Get Really HOT When Working. Mount Them On Metal Surface, NOT Plastic. So Don't Touch By Hand Directly. Amazon Filter System Might Not Be 100% Accurate, So Please Double Check Your Original Bulb Type Before Ordering. And The Bulbs Size Also Need To Be Confirmed. TUINCYN Offers \"ONE YEAR\" Warranty On Items Damaged During Delivery Or Have A Confirmed Manufacturer Defect. Please Buy with Confidence!

size:

2pcs 7443

Retail Price: $ 19.99

Wholesale Price: Inquire Now

FEATURES:

Plug and play LED load resistors for standard 7443 Socket LED bulb.
Excellent for Heat Dissipation.
This special error free decoder wiring kit will ensure LED bulbs function properly with no error on European cars such as Audi, BMW, Mercedes, Porsche, Volkswagen, etc for LED turn signal light or LED license plate lights.

COMMON VEHICLE USAGE:

Car, SUV, Van, Motorcycle, Scooter, Trailer, RV, Boat, Marine, ect.

PACKAGE INCLUDED:

2pcs 50W 8ohm 7443 Led Load Resistors

7443 LED Load Resistors

The Socket

Make sure choose the correct Socket Type of bulb before placing order.
If they don't light after inserting into the socket, insert oppositely.
Using LED bulbs for turn signal light, you may need load resistors to prevent LED bulbs from hyper flashing.

Standard 7443 LED Load Resistors

Fits The Following Type: 7443, 7444NA.
For standard bulb. Not fit for the CK type bulb!!!
Please make sure your LED bulb is standard before purchasing. Thank you!
Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So don't touch by hand directly.

Socket Type: Standard 7443 (NOT FOR THE CK TYPE!!!)
Resistance: 8 Ohm
Wattage: 50W
Condition: 100% Brand New

Why Do I Need The LED Load Resistor?

LED Turn Signals Blinking Too Fast.
LED lighting draws much less power and lasts much longer than standard incandescent lighting. The lower current draw will cause what is known as hyperflashing, where the LED bulb will blink faster than the stock bulb. This can be fixed with a flasher or load resistor.
One LED load resistor is for one bulb.

P.s: Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So don't touch by hand directly.

8 Ohm is with higher decorder rate than the 6 Ohm resistors.


	High Decoder Rate DIY LED Load Resistors	TUINCYN H1 LED Headlight Bulb Fanless 6500K	1156 CANBUS Free Bulb	Super Bright H1 LED Fog Light Bulb	1156 LED Bulb Amber Yellow Turn Signal Light Bulb	TUINCYN High Power H11 LED Headlight Bulbs
PRODUCT TYPE	LED Load Resistors	H1	1156	H1	1156	H11 H8 H9
LED TYPE	None	Top CSP Chip	54SMD-2016 CREE Chip	3014 78-SMD	5630 33-SMD	CSP Chip
USAGE	Solve Hyper Flash Problem, Fix CANBUS Error	Headlight Bulbs, Headlamp, DRL, Driving Lamp, Running Light, Fog Light	Turn Signal Light, Blinkers, Indicators, Running Light, Ect.	Fog Lights, Daytime Running Light, Driving Lamp, DRL.	Turn Signals Lights, Tail Blinker Lights, Brake Lights, Reverse Lights, Side Marker Lights	Headlight/Headlamp, Fog Light, DRL, Daylight Running Light, Daytime Driver, Driving Lamp Ect.
WALT	50W 8ohm	50W Per Set	66W Per Set	8W Per Set	3.6W Per Bulb	60W Per Set

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

TUINCYN 2pcs 50W 8 ohm 7443 7444NA Led Load Resistor - Fix Headlight LED Bulb Fog Lamp Fast Hyper Flash Turn Signal Blink Light Error Code Canbus Resistors Decoder

BEST SELLERS

Product introduction

Shipping Notices

Product Description

FEATURES:

Plug and play LED load resistors for standard 7443 Socket LED bulb.
Excellent for Heat Dissipation.
This special error free decoder wiring kit will ensure LED bulbs function properly with no error on European cars such as Audi, BMW, Mercedes, Porsche, Volkswagen, etc for LED turn signal light or LED license plate lights.

COMMON VEHICLE USAGE:

Car, SUV, Van, Motorcycle, Scooter, Trailer, RV, Boat, Marine, ect.

PACKAGE INCLUDED:

2pcs 50W 8ohm 7443 Led Load Resistors

7443 LED Load Resistors

The Socket

Make sure choose the correct Socket Type of bulb before placing order.
If they don't light after inserting into the socket, insert oppositely.
Using LED bulbs for turn signal light, you may need load resistors to prevent LED bulbs from hyper flashing.

Standard 7443 LED Load Resistors

Fits The Following Type: 7443, 7444NA.
For standard bulb. Not fit for the CK type bulb!!!
Please make sure your LED bulb is standard before purchasing. Thank you!
Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So don't touch by hand directly.

Socket Type: Standard 7443 (NOT FOR THE CK TYPE!!!)
Resistance: 8 Ohm
Wattage: 50W
Condition: 100% Brand New

Why Do I Need The LED Load Resistor?

LED Turn Signals Blinking Too Fast.
LED lighting draws much less power and lasts much longer than standard incandescent lighting. The lower current draw will cause what is known as hyperflashing, where the LED bulb will blink faster than the stock bulb. This can be fixed with a flasher or load resistor.
One LED load resistor is for one bulb.

P.s: Load Resistors heat up like light bulbs and get really HOT when working. Mount them on metal surface, NOT plastic. So don't touch by hand directly.

8 Ohm is with higher decorder rate than the 6 Ohm resistors.


	High Decoder Rate DIY LED Load Resistors	TUINCYN H1 LED Headlight Bulb Fanless 6500K	1156 CANBUS Free Bulb	Super Bright H1 LED Fog Light Bulb	1156 LED Bulb Amber Yellow Turn Signal Light Bulb	TUINCYN High Power H11 LED Headlight Bulbs
PRODUCT TYPE	LED Load Resistors	H1	1156	H1	1156	H11 H8 H9
LED TYPE	None	Top CSP Chip	54SMD-2016 CREE Chip	3014 78-SMD	5630 33-SMD	CSP Chip
USAGE	Solve Hyper Flash Problem, Fix CANBUS Error	Headlight Bulbs, Headlamp, DRL, Driving Lamp, Running Light, Fog Light	Turn Signal Light, Blinkers, Indicators, Running Light, Ect.	Fog Lights, Daytime Running Light, Driving Lamp, DRL.	Turn Signals Lights, Tail Blinker Lights, Brake Lights, Reverse Lights, Side Marker Lights	Headlight/Headlamp, Fog Light, DRL, Daylight Running Light, Daytime Driver, Driving Lamp Ect.
WALT	50W 8ohm	50W Per Set	66W Per Set	8W Per Set	3.6W Per Bulb	60W Per Set

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.