DIYHD TSQ15 5FT Industrial Big Spoke Wheel Sliding Barn Hardware,Fit Width Up to 29", Track, Single Door kit
  • Hardware only, not including door panel
  • Material: Steel, POM; Color: Black; Suitable for door thickness: 40-45mm; Can bear MAX weight 90kg
  • Package's including: Big wheel*2, Stopper*2, Track*1, Floor guide*1, Anti-pad*2
  • Track had been pre-drilled 16\"(406mm) apart holes
  • Track's two end had been pre-drilled small holes for track connector to make a long track
Retail Price: $ 67.3
Wholesale Price: Inquire Now
DIYHD TSQ15 5FT Industrial Big Spoke Wheel Sliding Barn Hardware,Fit Width Up to 29", Track, Single Door kit
DIYHD TSQ15 5FT Industrial Big Spoke Wheel Sliding Barn Hardware,Fit Width Up to 29", Track, Single Door kit

Product Description

DIYHD TSQ15 5FT Industrial Big Spoke Wheel Sliding Barn Hardware,Fit Door Width Up to 29", Single kit, Black

1

Hardware only,not including door panel

  • Material:Steel,POM;
  • Color:Black;
  • Track length 5FT,can be used for door panel width up to 29"
1

Full set kit including:

Big wheel*2,

Stopper*2,

5FT Track*1+Track&wall connector*4

Floor guide*1,

Anti-pad*2;

1

roller

stop

track

Tec detail

Tec

Tec detail

Important:

-If the frame thicker than 1/2",remove the frame mouldings to minimize door undercut.

-If you do not remove them,use extra spacers(not included) or install a piece of wood (not included) of the same thickness and length as the mouldings before installing the new hardware to ensure door undercut.

-Do not install directly onto drywall or other hollow wall

-Such surfaces are not strong enough to support the total active weight of the track and door.

-Every fastener used to attach the track to the wall must be fastened securely into a structural surface.

-The height from top of the door to the top of the roller is 7 3/8",pls check if your wall have enough space to install this kit before order!

-The gap between door and wall is 16/25",if you have thick(thickness more than 1/2") baseboard or door frame,pls try to add a wood board on the back side of the track to make a bigger gap

-Drill holes on the door panel:

a.first center hole to the top of the door:1-9/16".

b.center length between two holes:3-9/16".

-Door panel need cut a groove for floor guide:

Groove width:3/8". Groove height:3/4".

a
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
1 Insurance Policy: Learn more
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
8 Returns Policy: Learn more
Inquire Now
X

Contact us now