HOW TO EXTEND OR CHANGE THE WICK
Don’t keep using the lighter if there is lighter fluid insufficient. If you see the flame is weak and the wick becomes difficult to be ignited, then you may need to refill it.
Do not burn the cotton core for more than 10 seconds each time. When the wick is burned to red and become short, the wick can’t absorb enough fluid so it will be difficult to ignite. Please extend or change the wick by the steps as below.
1. Pull the steel scraper out by pliers.
2. Slowly pull the wick out, stop pulling if you think it’s long enough. Please directly change the wick if it’s too short to wrap the scraper.
3. Put the scraper back to the middle of the wick, and then lightly hammer it back to the pipe.
4. The exposed part of the wick should be at least half of the length of the exposed scraper.