Concrete Foundation Crack Repair Kit - Low Viscosity Polyurethane - FLEXKIT-1050-60

Retail Price: $ 529.0

Contractor-Grade Kit

The FLEXKIT-1050 is a contractor kit which includes all you need to repair dry, wet, or actively leaking cracks, joints, and various voids in below-grade foundations and concrete structures. It sets fast to form a complete seal throughout the entire thickness of a concrete foundation wall which expands 400% to 600% and cures as a flexible, yet tough, closed-cell foam. The seal will withstand concrete cracking and shifting as the result of thermal cycles, due to its excellent bonding capabilities. It is designed for repairing cracks that are 1/16" to 5/16" wide.

Usage: For repairing concrete cracks in foundation walls, cold joints, tie rod, around pipe penetration and other various concrete voids.

PROFESSIONAL GRADE KIT

Ready for the job, our kits include the same materials and method that professional contractors use. We don't compromise on quality, so your job gets done right the first time.

What's in the box:

6 Flexomeric FLEXTUBE-1050 Crack Injection Resin Cartridge (600ml Dual-Pack)
6 Flexomeric Crack Adhesive (Part A)
6 Flexomeric Crack Adhesive (Part B)
8 Element Static Mixer Nozzles
6 Retaining Nut
72 Flat Injection Ports and Caps
12 Mixing Sticks
12 Pair of Gloves
1 Plastic Trowel for Adhesive
1 Wire Brush
1 Safety Goggles
1 Garbage Bag
1 Instruction Booklet


Dual-Cartridge Gun The 600ml dual-component FLEX-1050 Flexible Resin is injected into the concrete crack using a quality, dual-component injection gun. (Included)	Wire Brush A wire brush is required for the cleaning step of the instructions. It is used to clean away any loose concrete, paint, oil, dirt and other debri on the surface of the crack. (Included)	Spray or Squirt Bottle Flushing the crack with water is an essential step. This is to ensure that the injection ports are not plugged and the paste is clear of weeping holes. (Not included in this kit)	Safety Goggles Safety goggles are required to ensure eye protection during the injection process. Materials may be harmful when in direct contact with eyes. (Included)

Which Flexomeric kit do I need?

Choosing the correct Flexomeric DIY Foundation Crack Repair kit is easy.

Measure the smallest width of the crack. Often, this is at the bottom of the crack. The injection material needs to be able to penetrate this portion of the crack to ensure that entire crack is sealed.

Take a quarter coin to measure the thinest part of the crack. A quarter coin is approximately 1/16" thick.

1/16" to 5/16": use FLEXKIT-1050
5/16" and wider: use FLEXKIT-1100
Hairline to 1/16": use FLEXKIT-1150

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Concrete Foundation Crack Repair Kit - Low Viscosity Polyurethane - FLEXKIT-1050-60

BEST SELLERS

Product introduction

Shipping Notices

Product Description

PROFESSIONAL GRADE KIT

Ready for the job, our kits include the same materials and method that professional contractors use. We don't compromise on quality, so your job gets done right the first time.

What's in the box:

6 Flexomeric FLEXTUBE-1050 Crack Injection Resin Cartridge (600ml Dual-Pack)
6 Flexomeric Crack Adhesive (Part A)
6 Flexomeric Crack Adhesive (Part B)
8 Element Static Mixer Nozzles
6 Retaining Nut
72 Flat Injection Ports and Caps
12 Mixing Sticks
12 Pair of Gloves
1 Plastic Trowel for Adhesive
1 Wire Brush
1 Safety Goggles
1 Garbage Bag
1 Instruction Booklet


Dual-Cartridge Gun The 600ml dual-component FLEX-1050 Flexible Resin is injected into the concrete crack using a quality, dual-component injection gun. (Included)	Wire Brush A wire brush is required for the cleaning step of the instructions. It is used to clean away any loose concrete, paint, oil, dirt and other debri on the surface of the crack. (Included)	Spray or Squirt Bottle Flushing the crack with water is an essential step. This is to ensure that the injection ports are not plugged and the paste is clear of weeping holes. (Not included in this kit)	Safety Goggles Safety goggles are required to ensure eye protection during the injection process. Materials may be harmful when in direct contact with eyes. (Included)

Which Flexomeric kit do I need?

1/16" to 5/16": use FLEXKIT-1050
5/16" and wider: use FLEXKIT-1100
Hairline to 1/16": use FLEXKIT-1150

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.