The Vestil EHLTG-4470-2-48 ground lift scissor table has a steel frame, a remote motor, a hydraulic platform, and a foot control and is suitable for lifting a pallet for loading or unloading in lieu of a forklift truck. Steel resists wear and corrosion. The blue powder-coated finish resists scratches, chipping, fading, and other wear. The joints are welded for strength. The 2 hp, 460V, three-phase, remote electric motor can raise and lower the platform to an optimal height for loading or unloading. The motor is enclosed in a plastic cover for protection and can be set up to 8' away from the table. A 24V foot control on an 8' cord enables the table to be operated at a distance. The single scissors mechanism extends to raise the platform to as high as 48". The table has a lowered height of 1/2" for placing a pallet onto the platform or removing a pallet using a pallet truck. An electric toe guard protects pinch points when lowering the platform for safety. An upper travel limit switch stops the platform at its maximum height. A velocity fuse in the hydraulic cylinder helps prevent it from failing. The table's platform measures 44 x 73 inches (W x L). (W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.) The table has a load capacity of 2,000 lb., a service range of 1/2 to 48 inches, and a hydraulic component rating of 3,000 psi and weighs 1,995 lb. It measures 67 x 78 x 10 inches overall (W x L x H). (H is height, the vertical distance from lowest to highest point.)

Lift tables typically comprise a frame, a scissors mechanism, and a hydraulic or motorized platform that can be raised or lowered to an optimal, ergonomic height to load or unload heavy materials, or to support a person. Some lift tables have wheels and a handle, allowing them to be used as carts for transporting materials. The platform may be controlled with a foot pump or, in the case of electric-powered lift tables, push buttons. Lift tables can be used in warehouses and other industrial environments.

Vestil manufactures materials handling equipment, including hoists and trolleys, jib and gantry cranes, loading dock equipment, and storage solutions. The company, founded in 1968, is headquartered in Angola, IN.