Meet the Renogy Adventurer-Li, newly improved with two advanced features. Thanks to its programmable Lithium charging voltage, the 30A PWM solar charge controller is now capable of charging most Lithium batteries available on the market. The second addition to the controller is the RS232 port, used to connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Adventurer-Li, you can now use the smartphone app, Renogy BT, to monitor and adjust your solar system remotely. Unique in its form, the Adventurer-Li is a negative-ground, flush mount controller, designed for an aesthetically clean and integrated look on RV and camper walls. However, if flush mounting does not appeal to you, an included Surface Mount Attachment allows you to forgo it. Capable of charging both 12V and 24V photovoltaic systems, the Adventurer-Li integrates highly efficient PWM charging to increase battery longevity by regulating the charge flowing from the solar panels to the battery bank. This charge controller comes equipped with a fully comprehensive self-diagnostic system and electronic protection functions to prevent damage from installation mistakes or system faults. Specifications Controller Nominal Voltage: 12 VDC/ 24 VDC Rated Charge Current: 30A Equalization Voltage: Sealed: 14. 6 V; Gel: None; Flooded: 14. 8 V Float Voltage: 13. 8 V Self-consumption: ≤ 13mA Operating Temperature: -13° F to 131° F Enclosure: IP20 Terminals: Up to 8 AWG USB Output: 5V, 2. 4A Max Max. PV Input Voltage: 50 VDC Boost Voltage: Sealed: 14. 4 V; Gel: 14. 2 V; Flooded: 14. 6 V; Lithium: 14. 2 V Under Voltage Warning: 12V Temperature Compensation Coefficient: -3mV/° C/2V Storage Temperature: -31° F to 176° F Dimensions: 6. 56 x 4. 50 x 1. 90 inches Weight: 0. 6 lbs BT-1 Standby Power Consumption: 0. 04W Communication Range: ≤ 15m Cable Length: 5. 00 m (16. 4 ft) Installation Dimensions: 57. 5, φ 3. 2mm (2. 26, φ 0. 13in) Protection Grade: IP67 Input Voltage: 5V-12V