Idoorythe Non Contact Voltage Tester AC Electricity Detect Pen 12V-1000V/48V-1000V with Multi Indicator LCD Display, Flashlight, Buzzer Alarm for Wire Break-point Finder IE01

Safety Range: CAT.III 1000V, CAT.IV 600V, CE

▶Multifunctional LCD Display - The non contact tester comes with a distinctive LCD screen which could show the signal of power on, high-sensitivity, danger and flashlight as well as low battery; NOTE: the digital 36V, 110V, 220v doesn’t mean the exact numbers detected, but the voltage signal strength

▶Non-Contact & Safe Wire Break-point Finder - To place the NCV inductive probe near a supply cord and outlet, the pilot light will be on and the analog phase & data will change according to the voltage signal; If the voltage is below 36V, it will show green light, if above 36V it will show red light & danger signal

▶Adjustable Sensitivity - The wire break point finder comes with two adjustable sensitivity(12-1000V&48-1000V); Just to press the sensitivity button for less than one second and the “S” shown on the screen, which means high-sensitivity and if the light is off, then it is low-sensitivity

▶Compact Design With Flashlight - Its weight only is 0.13 lb as could be took to everywhere for your work; The portable pencil hook allows us to carry the tester in the shirt pocket; The flashlight at the end of the finder will let your testing work more convenient in the dim environment

▶Auto Power Off & Low Battery Indicator - The tester pen will be auto power off after 3 minutes without any operation or signal to save the battery life; When the battery is low, the display will show signal, and if below 2.3V, the tester pen will be power off and u should change the battery

Retail Price: $ 14.99

Wholesale Price: Inquire Now

Idoorythe Non-contact voltage tester with double sensitivity has various indication on the screen.

Note:

Please be very careful when testing above AC Voltage 36V as such high voltage is dangerous.

Technical Data sheet:

AC Voltage: 12~1000V, 50/60Hz

Working Temperature: 32οF~104οF (0~40 degree)

Storage temperature:14οF~122οF (-10~50 degree)

Humidity: ≤95%

Altitude: ≤6562ft (≤2000 m)

Safety Range: CAT.III 1000V, CAT.IV 600V, CE

Power supply: 2×1.5V AAA batteries

How to find the breakpoint

√ To press the red button and last over 1 sec, it will show “POWER”.

√ Press the sensitivity switch/flashlight button for less than 1 sec then you can switch it to high-sensitivity until the “S” shown on the screen. Please note the high sensitivity range is 12-1000V. And then u can use NCV tip for moving along the wire.

√ Put the probe close to the AC voltage, the pilot light will be on and the analog phase & data will change according to the voltage signal. If the voltage signs is becoming smaller, buzzer is becoming low and the alert disappear, that is most probably the break-point.

Three Voltage Intensity Range

Convenient For Your Work

Press the sensitivity switch/flashlight button and last for over 2 seconds, the flashlight will be on. And if u press the button again for over 2 seconds, the flashlight will be off soon. If without any operation or signal, it will be auto power off in 3 minutes.

High Test, Medium Test, Low Test.

High Test: When voltage intensity tested over 110V&220V, the pilot light will on to red, analog phase & data will be the largest and the buzzer is the fastest.

Medium Test: When voltage intensity tested 36V-110V, the pilot light will on to red, analog phase & data is middle and the buzzer is moderate.

Low Test: When voltage intensity tested below 36V, the pilot light will on to green, analog phase & data is the smallest and the buzzer is the more slow.


Low Battery Indication Note: Please do not use the pen when the pen has no power or low power. For safety, when the battery is low, the display will show low battery signal, and if below 2.3V, the tester pen will be power off and you should change the battery if this happen again.	Easy To Carry Non Contact Tester comes with friendly design - portable hook, which allows you to carry everywhere. Battery Replacement: Please rotate the battery cover anti-clockwise and take the batteries out to replace the new batteries.	Two Sensitivity Adjustment The pretermission when power on is low-sensitivity status. Press the sensitivity switch/flashlight button for less than one second then u can switch it from high-sensitivity and low-sensitivity. When it shows “S”, it means high-sensitivity and if the light is off, then it is low-sensitivity. Please note the high sensitivity range is 12-1000V and low-sensitivity range is 48-1000V

To avoid the possibility of electronic shocks and harm to human:

The protective function may be influenced if not follow the instruction.

If there is no data on the screen pls do not use it.

Before using pls make sure you are testing on the electronic power to make sure the tester pen is working in the best condition.

The voltage exists even if there is no display or sound alarm when using the voltage tester pen. This voltage tester pen detects the effective voltage engendered by the power supply which has sufficient static field.

If the static is weak, the tester pen can’t detect the voltage, and the voltage may be inflected by following reasons includes but not just: shield cable, the insulating layer types & thickness, the distance from the power supply, the insulator, the difference of the socket design. pls send for maintenance.

Pls do not test the voltage over the measuring range.

Pls be very careful when testing above ACV 36V since such high voltage is dangerous.

Pls follow the local safety rules and use the tester pen correctly.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Idoorythe Non Contact Voltage Tester AC Electricity Detect Pen 12V-1000V/48V-1000V with Multi Indicator LCD Display, Flashlight, Buzzer Alarm for Wire Break-point Finder IE01

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Idoorythe Non-contact voltage tester with double sensitivity has various indication on the screen.

Note:

Please be very careful when testing above AC Voltage 36V as such high voltage is dangerous.

Technical Data sheet:

AC Voltage: 12~1000V, 50/60Hz

Working Temperature: 32οF~104οF (0~40 degree)

Storage temperature:14οF~122οF (-10~50 degree)

Humidity: ≤95%

Altitude: ≤6562ft (≤2000 m)

Safety Range: CAT.III 1000V, CAT.IV 600V, CE

Power supply: 2×1.5V AAA batteries

How to find the breakpoint

√ To press the red button and last over 1 sec, it will show “POWER”.

Three Voltage Intensity Range

Convenient For Your Work

High Test, Medium Test, Low Test.

High Test: When voltage intensity tested over 110V&220V, the pilot light will on to red, analog phase & data will be the largest and the buzzer is the fastest.

Medium Test: When voltage intensity tested 36V-110V, the pilot light will on to red, analog phase & data is middle and the buzzer is moderate.

Low Test: When voltage intensity tested below 36V, the pilot light will on to green, analog phase & data is the smallest and the buzzer is the more slow.


Low Battery Indication Note: Please do not use the pen when the pen has no power or low power. For safety, when the battery is low, the display will show low battery signal, and if below 2.3V, the tester pen will be power off and you should change the battery if this happen again.	Easy To Carry Non Contact Tester comes with friendly design - portable hook, which allows you to carry everywhere. Battery Replacement: Please rotate the battery cover anti-clockwise and take the batteries out to replace the new batteries.	Two Sensitivity Adjustment The pretermission when power on is low-sensitivity status. Press the sensitivity switch/flashlight button for less than one second then u can switch it from high-sensitivity and low-sensitivity. When it shows “S”, it means high-sensitivity and if the light is off, then it is low-sensitivity. Please note the high sensitivity range is 12-1000V and low-sensitivity range is 48-1000V

To avoid the possibility of electronic shocks and harm to human:

The protective function may be influenced if not follow the instruction.

If there is no data on the screen pls do not use it.

Before using pls make sure you are testing on the electronic power to make sure the tester pen is working in the best condition.

Pls do not test the voltage over the measuring range.

Pls be very careful when testing above ACV 36V since such high voltage is dangerous.

Pls follow the local safety rules and use the tester pen correctly.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.