Mossy Oak Graphics Obsession Camo Boat Motor Wrap Kit - Easy to Install Vinyl Wrap with Matte Finish - 20 HP Or Less Kit
EASY TO INSTALL. Comes with 5 pre-cut pieces for the motor case and 3 pre-cut pieces for the lower unit. Also uses air release technology for simple, clean, bubble-free installation.
NO FADE FOR 5 YEARS. Our 3M MCS vinyl means you won't see any fading on this high quality wrap.
HIGH QUALITY 3M CAST VINYL. Our cast makes for an easy installation, high resolution patterns, and a long lasting skin that won't peel, shrink or crack.
REMOVABLE. When you desire, go ahead and remove our skin, it won't leave behind any adhesive residue.
DURABILITY. Our premium materials created a camo vinyl skin with an industry leading watercraft durability rating.
Wrap uses premium 3M cast vinyl materials to produce a camo vinyl wrap with a high watercraft durability rating and 5 years of no fading.
No Adhesive Residue
Our graphics will never harm the object’s surface and, in most cases, actually protect your surface from everyday wear and tear. All of our graphics can be removed without leaving residue.
5-Year No-Fade
Unlike other vinyl products, cast vinyl provides better print quality and materials free of edge lifting, peeling, cracking and pulling away.
Durable Vinyl Wrap to Disguise and Protect Your Hunting Boat Motor.
Our boat motor camo vinyl wrap uses state-of-the-art print technology to produce high definition camouflage patterns and cast materials, with a high watercraft durability rating. Don’t spend a fortune getting camo from the manufacturer. Get the utility of camouflage and the versatility of being able to change patterns based on your intended use. Wrap comes standard with a matte finish, making it ideal for your hunting boat.
Our camo vinyl boat motor graphics are available in 4 sizes and conform to all 2 and 4-cycle boat motors. Wrap comes as 5 precut pieces for the motor case and 3 pieces for the lower unit. Additional material will be needed to cover other areas of the boat, including the interior, sides, and transom.
Material is highly conformable and uses air release technology to provide a clean, bubble-free installation. Material is removable when desired and won’t leave behind an adhesive residue. We recommend using an edge sealer on watercraft applications.
Step-by-Step Installation Guide:
Step 1. Make sure the boat motor is in an environment between 60 and 95 °F. Wash the motor thoroughly. Then use a wax and grease remover on the motor.
Step 2. Apply 3M 94 primer around the edges and recessed areas. Less is more. This helps with adhesion.
Step 3. Apply sections of the vinyl to the motor at a time, starting at the back before moving on to the side, front, and finally the top. This causes the seams to overlap in a way that works best for weather conditions. Use squeegee tool and pressure to conform to curves. Peel back and adjust as much as needed.
Step 4. Use scissors to cut an irregular edge along the side pieces, then use the squeegee tool to lay the edges back down. This hides where the pieces come together. Then trim along the edge of the rubber gasket connecting the hood to the lower unit of the motor.
Step 5. Use heat to conform around edges and curves.
Step 6. Repeat the process to apply vinyl to lower unit. Apply, squeegee, trim and heat. Once vinyl is completely applied, use an edge sealer on all edges to protect from weather conditions.
Step 7. After installation: Apply heat and pressure over the graphics to reduce internal stress on the vinyl and ensure proper adhesion. Keep product stored above 60 °F for at least 12 hours to set the adhesive bond.
Mossy Oak Graphics Obsession 20 HP or Less Boat Motor Camouflage Kit is used for covering all 2 and 4-cycle boat motors. It comes standard in 4 different sizes and includes 5 precut pieces for the motor case and 3 precut pieces for the lower unit.
Wrap uses premium 3M cast vinyl materials to produce a camo vinyl wrap with a high watercraft durability rating and 5 years of no fading.
No Adhesive Residue
Our graphics will never harm the object’s surface and, in most cases, actually protect your surface from everyday wear and tear. All of our graphics can be removed without leaving residue.
5-Year No-Fade
Unlike other vinyl products, cast vinyl provides better print quality and materials free of edge lifting, peeling, cracking and pulling away.
Durable Vinyl Wrap to Disguise and Protect Your Hunting Boat Motor.
Our boat motor camo vinyl wrap uses state-of-the-art print technology to produce high definition camouflage patterns and cast materials, with a high watercraft durability rating. Don’t spend a fortune getting camo from the manufacturer. Get the utility of camouflage and the versatility of being able to change patterns based on your intended use. Wrap comes standard with a matte finish, making it ideal for your hunting boat.
Our camo vinyl boat motor graphics are available in 4 sizes and conform to all 2 and 4-cycle boat motors. Wrap comes as 5 precut pieces for the motor case and 3 pieces for the lower unit. Additional material will be needed to cover other areas of the boat, including the interior, sides, and transom.
Material is highly conformable and uses air release technology to provide a clean, bubble-free installation. Material is removable when desired and won’t leave behind an adhesive residue. We recommend using an edge sealer on watercraft applications.
Step-by-Step Installation Guide:
Step 1. Make sure the boat motor is in an environment between 60 and 95 °F. Wash the motor thoroughly. Then use a wax and grease remover on the motor.
Step 2. Apply 3M 94 primer around the edges and recessed areas. Less is more. This helps with adhesion.
Step 3. Apply sections of the vinyl to the motor at a time, starting at the back before moving on to the side, front, and finally the top. This causes the seams to overlap in a way that works best for weather conditions. Use squeegee tool and pressure to conform to curves. Peel back and adjust as much as needed.
Step 4. Use scissors to cut an irregular edge along the side pieces, then use the squeegee tool to lay the edges back down. This hides where the pieces come together. Then trim along the edge of the rubber gasket connecting the hood to the lower unit of the motor.
Step 5. Use heat to conform around edges and curves.
Step 6. Repeat the process to apply vinyl to lower unit. Apply, squeegee, trim and heat. Once vinyl is completely applied, use an edge sealer on all edges to protect from weather conditions.
Step 7. After installation: Apply heat and pressure over the graphics to reduce internal stress on the vinyl and ensure proper adhesion. Keep product stored above 60 °F for at least 12 hours to set the adhesive bond.
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.