INDARUN SOLAR MOTION SENSOR SPOTLIGHT
Specifications:
1. Solar Panel: 5V/1.5W
2. Lithium Battery: 18650/3.7V/2200mAh
3. Working Current: 30-800mA
4. Maximum Power: 3W
5. Maximum Lumen Value: 500lm
6. LED Specification: SMD 2835, 24-26lm, 6000k or 6500k
7. LED Quantities: 30pcs
8. Charging Time: 6 hours sun exposure
9. Infrared Sensor: 5-8 meters detection distance & 120° detection angle
10. Waterproof Level: IP65
Application Methods:
First, completely shut out the solar panel or put it down on the desktop. Then press the button for 3 seconds to start the lamp. After started, enter the first lighting mode. Please note that each press will change its lighting mode, with lights' flickering at the same time. And specific introduction of 3 lighting modes is as follows:
1. Micro-mode + Induction Mode
When human approaches, the sensor triggers circuit to start high light, and the light will dim after human left for 15 seconds.
2. Induction Mode
When human comes, the sensor triggers circuit to start high light, and the light will automatically turn off after human left for 15 seconds.
3. Warning Flash Mode
When human comes over, the sensor triggers circuit to activate the warning flash, and the light will automatically turn off after human left for 15 seconds.
4. Shutdown