20pcs Black Open End Lug Nuts - Metric 12x1.5 Thread Size - 0.81" Length - Cone Conical Taper Acorn Seat - 19mm 3/4" Hex Head - Compatible with many Acura Honda Lexus Kia Mazda Mitsubishi Toyota

Compatible with Various Acura Chevrolet Honda Hyundai Lexus Kia Mazda Mitsubishi Scion Toyota vehicles, including 3000GT Accord Avalon Camaro Camry Corolla Corvette Celica Integra Eclipse GTO IS300 IS250 IS350 Jimmy S15 S10 Blazer GS350 GS450 Lancer Miata Matrix MR2 Miata Neon NSX Optima Soul RX8 S2000 tC Prelude Protege RSX Tiburon TL Trans Am TSX xA xB Veloster and More. IMPORTANT to Verify Year & Model in Description. Vehicle Must Have M12x1.5 12x1.5mm Studs.

Total Length: 0.81 inches | Thread Size & Pitch: 12x1.5 | Seat Type: Cone Seat | Color: Black | HEX SIZE: 19mm (3/4\") | STYLE: Short, Open End Lug Nuts. See Diagram for Measurements.

SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels' lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.

INCLUDED: One Package contains a 20 Pack of Short, Open End Lug Nuts. These black Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. You'll also need a 19mm (3/4\") Hex Socket Key Tool.

While this 12x1.5 lug nut is not an oem or genuine Mazda, Mitsubishi, Toyota, Acura, Honda, Lexus, Hyundai, Kia, Scion Lug Nut, we are confident that you'll find our lug nuts to be a comparable, direct OEM replacement lug nut, at a significant cost savings.

color:

Black

Retail Price: $ 19.85

Wholesale Price: Inquire Now

StanceMagic

With over 10 years of experience in manufacturing and selling automotive parts and accessories, we've amassed a great deal of product knowledge and customer sentiment. Using this, we are able to provide high quality products that are compatible nearly any project on which you are working.

Specifications

Nut Height: 0.81 inches
Nut Width: 0.87 inches
Hex Size: 19mm (3/4")
Thread Pitch: 12x1.5
Seat Type: Conical / Acorn
Color: Black
Material: Cold Forged Steel

20pcs Black Open End Lug Nuts - Metric 12x1.5 Thread Size - Cone Conical Taper Acorn Seat

Add a little more style

Lug nuts can go a long way in viewing your wheels in a new light. The ones that came with your vehicle can often get dirty or rusty after years in the harsh elements. Replacing or upgrading them is a cost effective way to improve the overall look of your vehicle. These StanceMagic lug nuts are great for refreshing and old set or complementing a brand new set of wheels.

Fits 4-Lug and 5-Lug Vehicles with 12x1.5 Thread Pitch Studs - Acura, Chevrolet, Honda, Lexus, Mazda, Mitsubishi, Scion, Toyota.
Can also fit Cadillac, Chevrolet, Chrysler, Dodge, GMC, Jeep, Pontiac with 12x1.5 Wheel Studs
See List of Year/Make/Models in Application Guide below

APPLICATIONS: Works with 4-Lug and 5-Lug Vehicles with 12x1.5 Thread Pitch Studs

Acura: 1998-2002 CL. 1994-2001 Integra. 1993-2002 NSX. 2002-2006 RSX. 2002-2008 TL. 2004-2008 TSX. All TLX. All ILX.
Honda: Accord. Civic. Del Sol. Fit. CRX. CR-Z. HR-V. Prelude. S2000. Insight.
Hyundai: Azera. Elantra. Genesis. Genesis Coupe. Sonata. Tiburon. Veloster.
Kia: Forte Optima Soul.
Lexus: Sedans & Coupes (CT200h ES330 ES350 GS300 GS350 GS400 GS450 IS250 IS300 IS350 SC300 SC400 SC430).
Mazda: Sedans & Coupes (3 6 Miata MX-5 Miata Protege RX-7 RX-8).
Mitsubishi: Sedans & Coupes (3000GT Eclipse Lancer Galant).
Scion: tC xA xB xD.
Toyota: Sedans & Coupes (Avalon Camry Celica Corolla Matrix MR2 MR2 Spyder Supra).


Kit Contents Twenty (20) hex open end-style tuner lug nuts. Comes in high quality packaging to reduce chance of damage during transit.	Manufacturing Machined with precision to ensure a perfect fit every time. Made from cold forged steel to enhance durability and reliability.	Style Standard hex style (6-sided) lug nut. Can use any standard 19mm or 3/4" socket or tire iron for installation and removal.

IMPORTANT: Check Before Purchasing

Your vehicle must have 12x1.5 threaded studs.
Your wheels' lug holes must have conical / 60 degree cone / taper / acorn seat.
Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found above) to the nuts you are currently using.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

20pcs Black Open End Lug Nuts - Metric 12x1.5 Thread Size - 0.81" Length - Cone Conical Taper Acorn Seat - 19mm 3/4" Hex Head - Compatible with many Acura Honda Lexus Kia Mazda Mitsubishi Toyota

BEST SELLERS

Product introduction

Shipping Notices

Product Description

StanceMagic

Specifications

Nut Height: 0.81 inches
Nut Width: 0.87 inches
Hex Size: 19mm (3/4")
Thread Pitch: 12x1.5
Seat Type: Conical / Acorn
Color: Black
Material: Cold Forged Steel

20pcs Black Open End Lug Nuts - Metric 12x1.5 Thread Size - Cone Conical Taper Acorn Seat

Add a little more style

Fits 4-Lug and 5-Lug Vehicles with 12x1.5 Thread Pitch Studs - Acura, Chevrolet, Honda, Lexus, Mazda, Mitsubishi, Scion, Toyota.
Can also fit Cadillac, Chevrolet, Chrysler, Dodge, GMC, Jeep, Pontiac with 12x1.5 Wheel Studs
See List of Year/Make/Models in Application Guide below

APPLICATIONS: Works with 4-Lug and 5-Lug Vehicles with 12x1.5 Thread Pitch Studs

Acura: 1998-2002 CL. 1994-2001 Integra. 1993-2002 NSX. 2002-2006 RSX. 2002-2008 TL. 2004-2008 TSX. All TLX. All ILX.
Honda: Accord. Civic. Del Sol. Fit. CRX. CR-Z. HR-V. Prelude. S2000. Insight.
Hyundai: Azera. Elantra. Genesis. Genesis Coupe. Sonata. Tiburon. Veloster.
Kia: Forte Optima Soul.
Lexus: Sedans & Coupes (CT200h ES330 ES350 GS300 GS350 GS400 GS450 IS250 IS300 IS350 SC300 SC400 SC430).
Mazda: Sedans & Coupes (3 6 Miata MX-5 Miata Protege RX-7 RX-8).
Mitsubishi: Sedans & Coupes (3000GT Eclipse Lancer Galant).
Scion: tC xA xB xD.
Toyota: Sedans & Coupes (Avalon Camry Celica Corolla Matrix MR2 MR2 Spyder Supra).


Kit Contents Twenty (20) hex open end-style tuner lug nuts. Comes in high quality packaging to reduce chance of damage during transit.	Manufacturing Machined with precision to ensure a perfect fit every time. Made from cold forged steel to enhance durability and reliability.	Style Standard hex style (6-sided) lug nut. Can use any standard 19mm or 3/4" socket or tire iron for installation and removal.

IMPORTANT: Check Before Purchasing

Your vehicle must have 12x1.5 threaded studs.
Your wheels' lug holes must have conical / 60 degree cone / taper / acorn seat.
Ensure these lug nuts are the proper size. Compare the length/width of these lug nuts (diagram can be found above) to the nuts you are currently using.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.