Make your kids love hand washing

Research results show that kids at the age of 3-10 years old aren’t willing to wash hands although the majority of them are obedient. But as the saying goes “disease enters by the mouth”, healthy won’t be ensured if kids don’t wash hands. According to feedback offered by most parents, their kids gradually love hand washing since they purchase the soap dispenser.

Specifications:

Product Size: 73x100x215mm (L x W x H)

Working Temperature: 5℃-40℃

Battery Type: 4 AA Alkaline Batteries

Net Weight: 350g(Exclude Battery and Hand Lotion)

Working Humidity: 0％ - 85％RH

Main Material: ABS

Color: Transparent

How to separate and connect the main body and liquid bottle:

Separate: Rotate the top part 90 degrees anticlockwise to separate, then remove the top part (as shown in the figure);

Connect: Insert the top part into the liquid bottle, then rotate the top part 90 degrees clockwise to lock (as shown in the figure).

How to install batteries:

The battery slot is built at the bottom, and 4 AA dry batteries are required. Rotate the battery cover anticlockwise, install batteries according to electrodes, then rotate clockwise to lock. “+” and “-” are marked on the edge of the battery slot. Please install batteries according to directions. Otherwise, the machine will fail to work.

Touch switch, advanced technology

On/off switch is designed on the top, making it more convenient to power on or power off. It also gives longer service life. Lightly press the touch switch and the white indicator is on. It indicates that the device is powered on, then the indicator will be automatically off. Press the switch again and the red indicator is on. It shows that the device is powered off, then the indicator will be automatically off.

Hand-free, automatic sense and release foam:

The soap dispenser will automatically release foam once detecting your hands. Easy and convenient to clean our hands. It also avoids cross infection. The foaming soap dispenser just takes 0.25s to release hand lotion when the infrared sensor detects your hand within 2-5cm.

Warm Prompt:

1.Suggest 6:1 water and hand lotion (add proper amount of water and soap liquid according to your demands);

2.The soap dispenser will release foam only after multiple-time tests because the internal channel isn’t filled with liquid soap at the beginning;

3.Do not invert or incline its body, which may lead to liquid inflow and short circuit;

4.Do not immerse the product in water or directly wash under the tap, which may lead to short circuit;

5.A little bit lotion on the nozzle after foam releasing is normal. Please scrub it if necessary;

6.Put the product in the well-ventilated place; avoid direct sunlight or heat resource;

7.3 months (10-15 times per day); up to 5 months (depends on your frequency);

8.Timely added liquid if it is less than 50ML.