Compatible for:

PIXMA IP7220, PIXMA IP8720, PIXMA iX6820,
PIXMA MG5420, PIXMA MG5422, PIXMA MG5520,
PIXMA MG5522, PIXMA MG5620, PIXMA MG6320,
PIXMA MG6420, PIXMA MG6620, PIXMA MG7120,
PIXMA MG7520, PIXMA MX722, PIXMA MX922,
PIXMA MX920, PIXMA MG5500, PIXMA MG5622.

TROUBLESHOOTING

ERROR MESSAGE - "Not Recognized", "Cartridge is Missing/Damaged","Incompatible/Unsupported Cartridge Installed"
If you see one of the above error messages, remove the problem cartridge from its cradle inside the printer, and double check the copper strip is intact. Then, take a PENCIL ERASER, and firmly eraser over the contacts, then gently brush away any debris. Re-install the cartridge into the printer. If the problem persists, reset your printer by:
1. Turn off computer AND printer with cartridges installed
2. Unplug printer and leave everything off for 2 minutes
3. Restart printer AND computer and attempt to print again.

POOR PRINT QUALITY

If the print quality is inadequate, please follow the below instructions to run a cleaning cycle (may vary between printer models- for additional instructions, please consult your printer's user manual):
1. On your printer, press 'Menu' until you see 'Maintenance'.
2. Use arrow keys to scroll to 'Cleaning'. Press 'OK' to initiate cleaning cycle.
If the test page is not satisfactory, you can perform another cleaning cycle.
If the problem persists, please remove the cartridge from the printer and locate the printhead on the bottom side of cartridge.
1. Take a lint free cloth (i.e. coffee filter) fold it in half, and hold the cartridge (printhead side down) against the coffee filter for 3 seconds.
2. Lift the cartridge and you should see a blot if ink on the coffee filter.
3. Reinsert the cartridge into the printer.