Stainless Steel Wedge Anchors 3/8"-16 Concrete Expansion Anchors 304 Stainless Steel 3/8-16 x 5 inch Qty 25

Retail Price: $ 91.48

304 Stainless Steel - Corrosion & Rust Resistant
Includes Nuts and Washers
Used to secure material and equipment to concrete masonry surfaces
Also known as Thru Bolts, Stud Anchors, Concrete Bolts and Wedge Bolts
Installed into a pre-drilled hole, then the wedge is expanded by tightening the nut to securely anchor into the concrete

Concrete Wedge Anchor Bolts are used to install or fasten to concrete such as equipment, materials, generators, motors, pumps, pipes, strut, steel shapes, railing, benches, plastics or wood members. Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The non-threaded end is embedded into the hole and then struck to activate the expansion mechanism, which is fully utilized as the nut is tightened over the washer on the outside of the surface, on the material being fastened. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to.

How to Install Concrete Wedge Anchors


Insert Into Pre-Drilled Hole The first step is to insert the wedge anchor into a pre-drilled hole (or drill the hole into the masonry material). The hole should be the same diameter as the wedge anchor. Hit with a hammer until the desired embedment depth is reached.	Add the Material The next step is to add the equipment or material that you would like to anchor to the concrete over the exposed threaded portion of the bolt. Next add the washer and then the nut.	Tighten the Nut This is the important part. Using a wrench or socket, tighten the nut. This pulls the threaded portion of the bolt up through the wedge mechanism at the bottom of the anchor, which expands and embeds into the concrete and anchors the material to the concrete, brick or block.	Finished Application After the nut is tightened and the wedge has embedded into the masonry surface, the material you are anchoring should have a tight fit and be resistant to pulling out of the initial hole. Wedge anchors provide one of the strongest holds of all masonry anchors and are used in a wide variety of applications.

Stainless Steel Wedge Anchors

Stainless Steel Wedge Anchors in this selection are made of grade 304 Stainless Steel which is corrosion and rust resistant making it suitable for long lasting applications and those exposed to the elements.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Stainless Steel Wedge Anchors 3/8"-16 Concrete Expansion Anchors 304 Stainless Steel 3/8-16 x 5 inch Qty 25

BEST SELLERS

Product introduction

Shipping Notices

Product Description

304 Stainless Steel - Corrosion & Rust Resistant
Includes Nuts and Washers
Used to secure material and equipment to concrete masonry surfaces
Also known as Thru Bolts, Stud Anchors, Concrete Bolts and Wedge Bolts
Installed into a pre-drilled hole, then the wedge is expanded by tightening the nut to securely anchor into the concrete

How to Install Concrete Wedge Anchors


Insert Into Pre-Drilled Hole The first step is to insert the wedge anchor into a pre-drilled hole (or drill the hole into the masonry material). The hole should be the same diameter as the wedge anchor. Hit with a hammer until the desired embedment depth is reached.	Add the Material The next step is to add the equipment or material that you would like to anchor to the concrete over the exposed threaded portion of the bolt. Next add the washer and then the nut.	Tighten the Nut This is the important part. Using a wrench or socket, tighten the nut. This pulls the threaded portion of the bolt up through the wedge mechanism at the bottom of the anchor, which expands and embeds into the concrete and anchors the material to the concrete, brick or block.	Finished Application After the nut is tightened and the wedge has embedded into the masonry surface, the material you are anchoring should have a tight fit and be resistant to pulling out of the initial hole. Wedge anchors provide one of the strongest holds of all masonry anchors and are used in a wide variety of applications.

Stainless Steel Wedge Anchors

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.