INCLUDES:
Included in this package are two 6ft stainless steel washing machine hoses, suitable for both hot and cold water supply. The extra-thick internal rubber washers in every connector prevent leaks from ever developing. Hoses are color coded to ensure easy matching of hot-to-hot and cold-to-cold from your supply taps to your washing machine.
Enjoy years and years of drip-free service.

BURST PROOF:
Typical household water hovers around 60 psi. Our stainless steel washing machine hoses are rated to 125psi, which in many cases exeeds the rating of the actual plumbing that you will attach them to! Our super-high tensile strength braided stainless steel sheath ensures these pressure-retaining qualities, making these washer hoses completely burst-proof.

These hoses will outlast your washing machine - and the next one!

INSTALLATION INSTRUCTIONS:

Make sure supply taps are turned OFF.

1. Remove old hoses from supply taps.
2. Hand-tighten your new supply hoses onto the supply taps.
3. Then give another ¼ turn each with a pair of pliers (we recommend using tongue-and-groove pliers, as shown in the photo above.
4. Locate supply inlets on your washing machine. They should be labeleled "HOT" and "COLD", but in case they are not then you can assume that the HOT is on the left (like the picture above) and the COLD is on the right.
5. Hand-tighten the other end of your new supply hoses onto the corresponding inlets on your washer (hot to hot, cold to cold).
6. Then give another ¼ turn each with a pair of pliers.

You may now turn ON your supply taps.

NOTE: Before testing your washing machine, please ensure that your discharge (drain) hose is installed properly as well!