#17 x 12" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 250 Screw Count

High Performance Exterior Coated Star/Torx Drive Wood Screws (250 LAG SCREW COUNT) Easy Install Torx

Modified Truss (Washer) Head Provides High Compression Forces & Neat and Finished Appearance.

Type 17 Notched Extra Sharp Wood Screw Point Reduces the Need for Pre-Drilling in Even Hard Woods

Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power

Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads

size:

#17 x 12" - FULL BOX - 250 Screw Count

Retail Price: $ 23.95

Wholesale Price: Inquire Now

#17 x 12" Construction Lag Screws (Full Box - 250 Count)

High performance exterior coated Construction Lag Wood Screws are an excellent multipurpose fastener for professional operations & demanding industries. Construction applications include: decking, fencing, roofing, framing, timber frame, post & beam, etc.

Construction Lag Screws far exceed standard lag screws in shear strength, compression forces and ease of installation. Our construction lag screws are strong—can be removed and reused. Exterior coating provides an excellent multipurpose fastener for professional operations and demanding industries.


#17 x 12" Construction Lag Screws Screw engineering specs: Average shear strength of #17 shank—5294 lbs Average pull-out strength—2082 lbs (screw pull-out is calculated with a 3" length screw in the wood species: yellow pine.) Triple Coating: 1200-hour corrosion resistance in both ACQ and salt spray conditions.	#17 x 12" Construction Lag Screws Many construction fasteners come with a “knurl“, or multiple small protrusions at the top of the threads. This helps ensure that once the end of the threads are reached, the remaining smooth surface of the fastener slides easily, allowing for higher compression forces thanks to its now greatly reduced friction.	#17 x 12" Construction Lag Screws Use T40 Driver Bit Modified truss head screw (11/16" head diameter) has better compression that forces deep, wide, sharp screw threads. High quality, heat treated steel Torx/Star drive wood screw head, provides twice the torque of Phillips or square drive screw heads.	#17 x 12" Construction Lag Screws Type 17 screw point for quick starts without "walking." 3/8" construction lag screw thread diameter. High quality scr/ew threads cut cleanly and easily through tough materials. The wide and sharp screw threads provide maximum holding power.


	14x4" Construction Lag Screws (100 Count)	15x4" Construction Lag Screws (100 Count)	17x7" Construction Lag Screws (100 Count)	15x4" Stainless Steel Construction Lag Screws (100 Count)	9x3" Bronze Star FLAT HEAD Screws (1 Pound)	9x3" Gold Star FLAT HEAD Screws (1 Pound)
Size	#14 x 4 Inch	#15 x 4 Inches	#17 x 7 Inches	#15 x 4 Inches	#9 x 3 Inches	#9 x 3 Inches
Type 17 Screw Point	✓	✓	✓	✓	✓	✓
Exterior Coated	Exterior Coated	Exterior Coated	Exterior Coated	Stainless Steel	Exterior Coated	Yellow Zinc
Usage	Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam and Many More Exterior Applications	Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam and Many More Exterior Applications	Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam and Many More Exterior Applications	Chemically Treated Materials, Coastal Areas, Harsh Weather Areas, High Moisture Areas, and Many More Applications	Cabinetry, Furniture, Roofing, Framing, and Many More Exterior Applications	Cabinetry, Framing, Furniture and many More Wood Applications
Screw Count	Approximately 100 Screws	Approximately 100 Screws	Approximately 100 Screws	Approximately 100 Screws	Approximately 79 Screws	Approximately 78 Screws
Torx/Star Head Size	T25	T30	T40	T30	T25	T25
Easy to Install	✓	✓	✓	✓	✓	✓
ACQ and Treated Lumber Compatible	✓	✓	✓	✓	✓

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

#17 x 12" Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 250 Screw Count

BEST SELLERS

Product introduction

Shipping Notices

Product Description

#17 x 12" Construction Lag Screws (Full Box - 250 Count)


#17 x 12" Construction Lag Screws Screw engineering specs: Average shear strength of #17 shank—5294 lbs Average pull-out strength—2082 lbs (screw pull-out is calculated with a 3" length screw in the wood species: yellow pine.) Triple Coating: 1200-hour corrosion resistance in both ACQ and salt spray conditions.	#17 x 12" Construction Lag Screws Many construction fasteners come with a “knurl“, or multiple small protrusions at the top of the threads. This helps ensure that once the end of the threads are reached, the remaining smooth surface of the fastener slides easily, allowing for higher compression forces thanks to its now greatly reduced friction.	#17 x 12" Construction Lag Screws Use T40 Driver Bit Modified truss head screw (11/16" head diameter) has better compression that forces deep, wide, sharp screw threads. High quality, heat treated steel Torx/Star drive wood screw head, provides twice the torque of Phillips or square drive screw heads.	#17 x 12" Construction Lag Screws Type 17 screw point for quick starts without "walking." 3/8" construction lag screw thread diameter. High quality scr/ew threads cut cleanly and easily through tough materials. The wide and sharp screw threads provide maximum holding power.


	14x4" Construction Lag Screws (100 Count)	15x4" Construction Lag Screws (100 Count)	17x7" Construction Lag Screws (100 Count)	15x4" Stainless Steel Construction Lag Screws (100 Count)	9x3" Bronze Star FLAT HEAD Screws (1 Pound)	9x3" Gold Star FLAT HEAD Screws (1 Pound)
Size	#14 x 4 Inch	#15 x 4 Inches	#17 x 7 Inches	#15 x 4 Inches	#9 x 3 Inches	#9 x 3 Inches
Type 17 Screw Point	✓	✓	✓	✓	✓	✓
Exterior Coated	Exterior Coated	Exterior Coated	Exterior Coated	Stainless Steel	Exterior Coated	Yellow Zinc
Usage	Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam and Many More Exterior Applications	Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam and Many More Exterior Applications	Decking, Fencing, Roofing, Framing, Timber Frame, Post and Beam and Many More Exterior Applications	Chemically Treated Materials, Coastal Areas, Harsh Weather Areas, High Moisture Areas, and Many More Applications	Cabinetry, Furniture, Roofing, Framing, and Many More Exterior Applications	Cabinetry, Framing, Furniture and many More Wood Applications
Screw Count	Approximately 100 Screws	Approximately 100 Screws	Approximately 100 Screws	Approximately 100 Screws	Approximately 79 Screws	Approximately 78 Screws
Torx/Star Head Size	T25	T30	T40	T30	T25	T25
Easy to Install	✓	✓	✓	✓	✓	✓
ACQ and Treated Lumber Compatible	✓	✓	✓	✓	✓

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.