Why Matte Film Coating Kit?
Designed For Film
The Matte Film Coating Kit is a permanent nano ceramic coating for matte PPFs, wraps, and decals.
SUGGESTED:
Do NOT apply in direct sunlight.
Do not allow this product to freeze during storage.
If applied in temperatures less than 65-70 degrees the vehicle may need more time before removal.
Application Instructions
1. Before applying, ensure the film or vinyl wrap's surface is free of contaminants using Dr. Beasley's Film Cleanser.
2. Spray Matte Film Coating Prep onto a film or vinyl-wrapped panel and remove with a cloth.
3. Wrap the cloth around the foam block applicator and apply 10 drops of Matte Film Coating on the cloth in a line.
4. Start by applying Matte Film Coating in vertical lines down the panel. Repeat with horizontal lines.
5. Let product sit on surface for 2-3 min. then remove with a towel.
6. Repeat steps 4-5 on each panel.
7. After coating, leave undisturbed for an hour.