24pcs Silver Chrome Bulge 1/2x20 Lug Nuts - Conical Cone Taper Acorn Seat Closed End Extended 1.8 inch Length - Compatible with 6Lug Dodge Viper Dakota Durango - Uses 19mm or 3/4 inch Hex Socket

Compatible with 6-Lug Vehicles that use 1/2\" Thread Pitch studs Including 1991-2004 Dodge Dakota, 1998-2003 Dodge Durango, 1992-2017 Dodge Viper, 2003-2005 Chevrolet Astro. Vehicle Must Have 1/2\"-20 1/2x20 1/2\"x20 Studs.

Total Length: 1.80 inches | Thread Size & Pitch: 1/2-20 | Seat Type: Cone Seat | Color: Silver / Chrome | HEX SIZE: 19mm (3/4\") | STYLE: Long, Bulge Closed Lug Nuts. See Diagram for Measurements.

SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper thread size and length/width before installing. Additionally, ensure your wheels' lug seat matches these lug nuts. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.

INCLUDED: One Package contains a 24 Pack of Long, Bulge Closed Lug Nuts. These chrome Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. You'll also need a 19mm (3/4\") Hex Socket Key Tool.

These 1/2-20 lug nuts are not an oem or genuine OE part, but are compatible with various Dodge, Chevrolet vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance.

size:

1.8 inch Height

color:

Chrome Silver

Retail Price: $ 23.99

Wholesale Price: Inquire Now

StanceMagic Wheel Accessories

With over 10 years of experience in manufacturing and selling automotive parts and accessories, we've amassed a great deal of product knowledge and customer sentiment. Using this, we are able to provide high quality products that are compatible nearly any project on which you are working.

Specifications

Nut Height: 1.80 inches
Lug Diameter: 0.90 inches
Hex Size: 3/4" (19mm)
Thread Pitch: 1/2"x20
Seat Type: Conical / Acorn
Color: Silver
Material: Cold Forged Steel

24pcs Silver / Chrome Bulge Lug Nuts - 1/2"x20 Thread Size - 1.8" Length

Add a little more style

Lug nuts can go a long way in viewing your wheels in a new light. The ones that came with your vehicle can often get dirty or rusty after years in the harsh elements. Replacing or upgrading them is a cost effective way to improve the overall look of your vehicle. These StanceMagic lug nuts are great for refreshing and old set or complementing a brand new set of wheels.

Compatible with 6-Lug Vehicles with 1/2"x20 Threaded Wheel Studs
1987-2004 Dodge Dakota
1991-2003 Dodge Durango
2007-2011 Dodge Nitro
1975-1985 Dodge Ramcharger
1992-2010 Dodge Viper

APPLICATIONS: Compatible with 6-Lug Vehicles that have 1/2"x20 Thread Pitch Studs

Compatible with the following Dodge vehicles:

1987-2004 Dakota

1991-2003 Durango

2007-2011 Nitro

1975-1985 Ramcharger

1992-2010 Viper


Kit Contents Twenty-Four (24) hex bulge-style tuner lug nuts. Comes in high quality packaging to reduce chance of damage during transit.	Manufacturing Machined with precision to ensure a perfect fit every time. Made from cold forged steel to enhance durability and reliability.	Style Standard hex style (6-sided) lug nut. Can use any standard 19mm or 3/4" socket or tire iron for installation and removal.

IMPORTANT: Check Before Purchasing

Your vehicle must have 1/2"x20 threaded studs.
These lug nuts are designed to pair with 60 degree Cone Seat Wheels ONLY.
Cone seat is also commonly referred to as conical, taper, or acorn seat.
Ball seat and shank/mag style lug seats are NOT compatible with these lug nuts.
Check vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 40mm (about 1.6"), these will not work for you.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

24pcs Silver Chrome Bulge 1/2x20 Lug Nuts - Conical Cone Taper Acorn Seat Closed End Extended 1.8 inch Length - Compatible with 6Lug Dodge Viper Dakota Durango - Uses 19mm or 3/4 inch Hex Socket

BEST SELLERS

Product introduction

Shipping Notices

Product Description

StanceMagic Wheel Accessories

Specifications

Nut Height: 1.80 inches
Lug Diameter: 0.90 inches
Hex Size: 3/4" (19mm)
Thread Pitch: 1/2"x20
Seat Type: Conical / Acorn
Color: Silver
Material: Cold Forged Steel

24pcs Silver / Chrome Bulge Lug Nuts - 1/2"x20 Thread Size - 1.8" Length

Add a little more style

Compatible with 6-Lug Vehicles with 1/2"x20 Threaded Wheel Studs
1987-2004 Dodge Dakota
1991-2003 Dodge Durango
2007-2011 Dodge Nitro
1975-1985 Dodge Ramcharger
1992-2010 Dodge Viper

APPLICATIONS: Compatible with 6-Lug Vehicles that have 1/2"x20 Thread Pitch Studs

Compatible with the following Dodge vehicles:

1987-2004 Dakota

1991-2003 Durango

2007-2011 Nitro

1975-1985 Ramcharger

1992-2010 Viper


Kit Contents Twenty-Four (24) hex bulge-style tuner lug nuts. Comes in high quality packaging to reduce chance of damage during transit.	Manufacturing Machined with precision to ensure a perfect fit every time. Made from cold forged steel to enhance durability and reliability.	Style Standard hex style (6-sided) lug nut. Can use any standard 19mm or 3/4" socket or tire iron for installation and removal.

IMPORTANT: Check Before Purchasing

Your vehicle must have 1/2"x20 threaded studs.
These lug nuts are designed to pair with 60 degree Cone Seat Wheels ONLY.
Cone seat is also commonly referred to as conical, taper, or acorn seat.
Ball seat and shank/mag style lug seats are NOT compatible with these lug nuts.
Check vehicle's wheel stud length. If your wheel studs stick out past your wheel more than 40mm (about 1.6"), these will not work for you.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.