- All-inclusive Train Horn Kit - Primed with everything you need, this kit is ready for install right out of the box! PLEASE KEEP IN MIND THAT THIS COMPRESSOR IS NOT WEATHER RESISTANT. THIS UNIT MUST BE INSTALLED IN AN ENCLOSED AREA! Our compressor/tank is pre-plumbed and even pre-wired! The horn also comes with the solenoid valve pre-installed. This makes the install simple and easy.
- Deep Tone - This horn was designed with a large throat to provide a deeper tone. This isn't a wimpy air horn, this is a deep and powerful sounding train horn!
- Pre-installed Air Valve - This horn is ready to accept 1/2\" airline at a moments notice. Wire the solenoid to your activation switch/button and you are set!
- 3-Chime Construction - With 3 trumpets mounted on one bracket you can't go wrong! With a manifold design, installation has never been easier. Just mount the bracket to your vehicle with the provided mounting hardware and you're done! Plumb in your air supply and you're ready to honk!
- Stainless Steel Diaphragms - We use stainless steel diaphragms in our horns to ensure the horn will last for years to come. These diaphragms will never rust out.
3-Chime Construction
This 3-chime setup allows for a unique combination of notes to create that train horn tone we all know and love. Each bell is loaded with 3.5" stainless steel diaphragms. This means the diaphragms will never rust out and this horn will last for years to come.
Stainless Steel Diaphragms
Solenoid Valve
Large Throat
L-Bracket for Easy Install
Outlaw Specifications + Details
Size and Weight Specifications
Size / Weight
- 18.5" Long
- 15.5" Wide
- 12.5" Tall
- Weight: 15 Lbs.
Fully Rebuildable
Not only are these horns incredibly loud, but they are also serviceable. If you end up with a bunch of road debris or dirt in your horn, we offer a rebuild kit for these horns.
The solenoid valve is also replaceable as well should anything ever happen to it.
The horn bells themselves cannot be removed from the manifold.
Onboard Air System Requirements
Recommended Air System
This horn is not picky about the air you supply to it. We have found that this horn will still sound off with just 50 PSI! We recommend running 150 PSI to these horns, as we have found that they sound their best and are their loudest @ 150 PSI. You can expect up to 5-7 Seconds of honk time with a 2-gallon tank at 150 PSI. 1/2" Air line is recommended. Any smaller and the airflow will be limited.
Mounting this horn
This horn can be mounted nearly anywhere on your vehicle. You can even mount it to the roof!
We typically see these installed on trucks in the spare tire location. This allows you to tuck the horn up under the truck without it hanging down too low.
Additionally, it may be a good idea to angle it to either the drivers or passengers side of the vehicle. This helps prevent any road debris from getting into the horn and clogging up the internals.
|
|
|
|
|
|
|---|---|---|---|---|---|
| Outlaw Black Horn | Outlaw Chrome | Outlaw Chrome Marine | Admiral | Katrina | |
| # of bells | Three | Three | Three | Five | Five |
| Inlet Size (Air line) | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" |
| Horn Finish | Matte Black | Chrome | Chrome | Chrome | Matte Black |
| dB Rating | 142.7 | 140.4 | 142.8 | 141.5 | 142.3 |
| Weight | 15 Lbs. | 15 Lbs. | 15 Lbs. | 20 Lbs. | 20 Lbs. |
| Serviceable? | Rebuildable with Kit | Rebuildable with Kit | Rebuildable with Kit | Rebuildable with Kit | Rebuildable with Kit |
BEST SELLERS
Product Description
3-Chime Construction
This 3-chime setup allows for a unique combination of notes to create that train horn tone we all know and love. Each bell is loaded with 3.5" stainless steel diaphragms. This means the diaphragms will never rust out and this horn will last for years to come.
Stainless Steel Diaphragms
Solenoid Valve
Large Throat
L-Bracket for Easy Install
Outlaw Specifications + Details
Size and Weight Specifications
Size / Weight
- 18.5" Long
- 15.5" Wide
- 12.5" Tall
- Weight: 15 Lbs.
Fully Rebuildable
Not only are these horns incredibly loud, but they are also serviceable. If you end up with a bunch of road debris or dirt in your horn, we offer a rebuild kit for these horns.
The solenoid valve is also replaceable as well should anything ever happen to it.
The horn bells themselves cannot be removed from the manifold.
Onboard Air System Requirements
Recommended Air System
This horn is not picky about the air you supply to it. We have found that this horn will still sound off with just 50 PSI! We recommend running 150 PSI to these horns, as we have found that they sound their best and are their loudest @ 150 PSI. You can expect up to 5-7 Seconds of honk time with a 2-gallon tank at 150 PSI. 1/2" Air line is recommended. Any smaller and the airflow will be limited.
Mounting this horn
This horn can be mounted nearly anywhere on your vehicle. You can even mount it to the roof!
We typically see these installed on trucks in the spare tire location. This allows you to tuck the horn up under the truck without it hanging down too low.
Additionally, it may be a good idea to angle it to either the drivers or passengers side of the vehicle. This helps prevent any road debris from getting into the horn and clogging up the internals.
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| Outlaw Black Horn | Outlaw Chrome | Outlaw Chrome Marine | Admiral | Katrina | |
| # of bells | Three | Three | Three | Five | Five |
| Inlet Size (Air line) | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" |
| Horn Finish | Matte Black | Chrome | Chrome | Chrome | Matte Black |
| dB Rating | 142.7 | 140.4 | 142.8 | 141.5 | 142.3 |
| Weight | 15 Lbs. | 15 Lbs. | 15 Lbs. | 20 Lbs. | 20 Lbs. |
| Serviceable? | Rebuildable with Kit | Rebuildable with Kit | Rebuildable with Kit | Rebuildable with Kit | Rebuildable with Kit |
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
