Know More About KJOY Submersible LED Lights

• Upgraded 13 leds;
• Upgraded 16 Colors;
• Upgraded 100% Waterproof;
• Upgraded magnets function;
• Upgraded suction cups function;
• Upgraded 4 timer options;
• Upgraded 10 Levels of brightness adjustment;
• Upgraded RF remote range.

Know More about Suction cup and Magnet

• 1.Suction cup can be used in both air and underwater on flat and smooth surfaces. But not work on rough surface.
• 2.Please clean the surface before attaching, make sure there is no any stuff between the surface and suction cups. Especially, clean all the lubricant which may come from shower cream, moss in swimming pool etc. Any lubricant will defeat it, so clean the surface is very important before attaching suction cups.
• 3.Please pull the suction cups vertically if you want to remove them, don't pull it horizontally, it may pull out from the hole, there is the feature of design, it's not suction cup problem. Please note, and use it in correct way.
• 4.Magnet is perfect for any iron place which can be attracted by magnet, especially rough vertical surface, but not for smooth vertical surface, please use suction cup instead.
• 5.This is all magnet feature, not our magnet's problem, not matter how big is the magnet, they have the same advantage and disadvantage, if you cannot attach by magnet, please try other way.

Know More Tips About KJOY Submersible LED Lights

1. About product leaked: we have tested our products thousands, we are sure our products are 100% waterproof, but if you find the product leaked, please check if you have close the lights complete before you putting it into the water, So Please tighten this light as much as possible, otherwise, it will let water go inside;

2. About replace the batteries, please clean the water in the gap of lights before you replace the batteries, otherwise some water will flow into the battery case, and stay in the case. it will damage the components, and defeat the light in some time;

3. About the RF remote range, it will remote 100-164ft in air, but in water, it supports only 6.6ft/2m, because water will largely absorb signals, please remote closer when the remote control does not respond very good;

Know More about of RF Remote Control

• 1.Please remove the plastic insulating film on the bottom of remote before using it.
• 2.Please keep the remote dry from water, because it’s not waterproof, water will make it stop working.
• 3.Please long press the button"on" for 2 seconds to activate the light before setting, to make all lights light up together. Press longer if some lights don't response on time.
• 4.Press the botton "w" to check if all lights are showing white color, whichever brightness is darker, it means the light batteries are in low power, lower power will weaken the sensitivity of remote. If the light keep flashing red light, it means the batteries will be out of power soon, please change new batteries.
• 5. Because water will largely absorb signals, so our lights support to remote max 6.6ft/2m underwater, please use remote within 16.4ft/5m totally including water and air, that's, keep the remote close to the surface of the water, to ensure better and accurate control reaction.

Widely Used Underwater Submersible LED Lights

The waterproof LED base vase lights are not just for underwater - pool, hot tub, bathtub, pond, fountain, vases, aquarium, fish tank, etc. Also perfectly apply to decorate a variety of parties, wedding, stage, disco, shopping malls, jewelry stores, showrooms, showcase, cabinet, museums, shops, aquarium light fixture, fish Tank light, family bulbs and other occasions like Halloween, Christmas!