EPEVER MPPT Charge Controller 40A,12V/24V Auto Work Max PV 100V Solar Panel Regulator Charge Controller with LCD Display Negative Ground Upgrade for Gel Flooded Sealed Lithium Battery (Tracer4210AN)

EPever 40A MPPT Charge Controller Tracer4210AN , 12V/24V Auto Work , Common Negative Grounding . (We Have Team and Stock in US Chicago, Fast Shipping and Good Services )2018 New Released Tracer-AN MPPT solar charge controller is upgrade version then Tacer-A series , Better funcations and advanced technology , Support lead-acid batteries and Lithium Batteries too . More Safety Protection.

Advanced MPPT technology, with efficiency no less than 99.5% ,Ultra-fast tracking speed and guaranteed tracking efficiency,Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time ; Wide MPP operating voltage range,High quality components, perfecting system performance, with maximum conversion efficiency of 98%,Accurate recognition and tracking of multiple-peaks maximum power point ;

International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product's service life ,Charging power and current limitation function,

Compatible with lead-acid and lithium-ion batteries,Battery temperature compensation function（only for Lead-acid battery）, Real-time energy statistics function,Overheating power reduction function;Multiple load work modes, The communication port adopts professional protection chip,With RS-485 communication bus interface and Modbus communication protocol.Monitor and set the parameters via mobile phone APP or PC software,Full-load operation without any drop in capacity within the range of working

(1 X Temperature sensor as free gift )Please feel free to contact with our team for techanical support , our engineer could help you find suggestion and solution.

color:

Tracer4210AN

Retail Price: $ 139.99

Wholesale Price: Inquire Now

EPEVER MPPT Solar Charge Controller 40 Amp ,12V/24V DC auto work ,Max PV 100V ,Solar Panels Max input 520W charging for 12V battery system or 1040W charging for 24V battery system, Common Negative Grounded . Suitable for Lead-acid (Sealed / Gel(AGM) / Flooded); Lithium and User-defined .

Technical Data:

Model: Tracer4210AN
Rated charge and discharge current :40 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type :Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
LCD backlight time : 60S (Default)
RS485 interface:5VDC/100mA
Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#6 AWG(16mm2)
Dimension:252*180*63mm ; weight :1.65 KG

Package List:

1 X 40A MPPT Solar Charge Controller Tracer4210AN
1 X Temperature sensor for controller（Model:RT-MF58R47K3.81A）
1 X Manual (English)

Note :

Our warehous in Chicago, Illinois, our professional engineer local team supply solar system solutions and aftersale services for you in time .

EPEVER Tracer-AN series mppt solar charge controller is new upgraded version than Tacer-A series , Better funcations and advanced technology .

Added Features than Tracer-A series :

Blacklight LCD Display ;
Common Negative Ground ;
Compatible with lead-acid and lithium-ion batteries too ;
More Safety Protection Functions .

Product Features:

Based on common negative design and Advanced MPPT technology, with efficiency no less than 99.5%,Ultra-fast tracking speed and tracking efficiency ;
With the adaptive three-stage charging mode based on digital control circuit, Tracer-AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system;
All-around electronic protections, including overcharging, over discharging, PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time;
The isolated RS485 interface with standard MODBUS communication protocol, easy for customer to monitor and set the parameters via mobile phone APP or PC software;
This modular solar controller can be widely used for different applications, e.g.solar RV, Communication base stations, household systems, and field monitoring, etc.

Protection function :

•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection
• Night Reverse Charging protection • Controller Overheating protection
• Battery Reverse Polarity protection • Battery Over Voltage protection
• Battery Over Discharge protection • Battery Overheating protection
• Lithium Battery Low Temperature protection
• Load Short Circuit protection • Load Overload protection
•TVS High Voltage Transients protection

Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order >3. >2. >1.

Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.
DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .
If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)

How to program for Lithium Battery？

Via Remote Meter (Accessories needed: MT50)
Via PC Software (Accessories needed RS485 cable :CC-USB-RS485-150U )
Via Phone APP [ Android or IOS], (Accessories needed：eBOX-WIFI-01 or eBOX-BLE-01 )
Software download website: EPEVER official website or read in manual .


	MPPT 10A	MPPT 20A	MPPT 30A	MPPT 40A	MPPT 50A	MPPT 60A
Rated Charge Current	10 Amp	20 Amp	30 Amp	40 Amp	50 Amp (No Load Terminal)	60 Amp (No Load Terminal)
Max PV Voltage	100V	100V	100V	100V	150V	150V
Max Array Solar Panel power	130W/12V; 260W/24V	2600W/12V; 520W/24V	390W/12V; 780W/24V	520W/12V; 1040W/24V	625W/12V; 1250W/24V; 2500W/48V	750W/12V; 1500W/24V; 3000W/48V
Battery Type	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User	Sealed, Gel(AGM), Flooded, User
Grounding	Common Negative	Common Negative	Common Negative	Common Negative	Common Negative	Common Negative
Controller Terminal	12AWG(4mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	2AWG(35mm 2 )
Recommended Cable Size	12AWG(4mm 2 )	10AWG(6mm 2 )	8AWG(10mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

EPEVER MPPT Charge Controller 40A,12V/24V Auto Work Max PV 100V Solar Panel Regulator Charge Controller with LCD Display Negative Ground Upgrade for Gel Flooded Sealed Lithium Battery (Tracer4210AN)

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Technical Data:

Model: Tracer4210AN
Rated charge and discharge current :40 Amp
Nominal system voltage:12V/24V DC auto work
Max. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery system
Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)
Battery type :Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )
Battery voltage range : 8～32V
MPP voltage range:V(BAT+2V)～72V
Grounding : Common negative
Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%
Working environment temperature : -25℃～+50℃(100% input and output)
Temperature: -20°C -- +70°C/-4°F -- 158°F
LCD backlight time : 60S (Default)
RS485 interface:5VDC/100mA
Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#6 AWG(16mm2)
Dimension:252*180*63mm ; weight :1.65 KG

Package List:

1 X 40A MPPT Solar Charge Controller Tracer4210AN
1 X Temperature sensor for controller（Model:RT-MF58R47K3.81A）
1 X Manual (English)

Note :

Our warehous in Chicago, Illinois, our professional engineer local team supply solar system solutions and aftersale services for you in time .

EPEVER Tracer-AN series mppt solar charge controller is new upgraded version than Tacer-A series , Better funcations and advanced technology .

Added Features than Tracer-A series :

Blacklight LCD Display ;
Common Negative Ground ;
Compatible with lead-acid and lithium-ion batteries too ;
More Safety Protection Functions .

Product Features:

Based on common negative design and Advanced MPPT technology, with efficiency no less than 99.5%,Ultra-fast tracking speed and tracking efficiency ;
With the adaptive three-stage charging mode based on digital control circuit, Tracer-AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system;
All-around electronic protections, including overcharging, over discharging, PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time;
The isolated RS485 interface with standard MODBUS communication protocol, easy for customer to monitor and set the parameters via mobile phone APP or PC software;
This modular solar controller can be widely used for different applications, e.g.solar RV, Communication base stations, household systems, and field monitoring, etc.

Protection function :

•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection
• Night Reverse Charging protection • Controller Overheating protection
• Battery Reverse Polarity protection • Battery Over Voltage protection
• Battery Over Discharge protection • Battery Overheating protection
• Lithium Battery Low Temperature protection
• Load Short Circuit protection • Load Overload protection
•TVS High Voltage Transients protection

Step: Connect solar system in the order of 1.battery--> 2. load--> 3.PV array ; and disconnect solar system in the reverse order >3. >2. >1.

Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.
DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .
If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)

How to program for Lithium Battery？

Via Remote Meter (Accessories needed: MT50)
Via PC Software (Accessories needed RS485 cable :CC-USB-RS485-150U )
Via Phone APP [ Android or IOS], (Accessories needed：eBOX-WIFI-01 or eBOX-BLE-01 )
Software download website: EPEVER official website or read in manual .


	MPPT 10A	MPPT 20A	MPPT 30A	MPPT 40A	MPPT 50A	MPPT 60A
Rated Charge Current	10 Amp	20 Amp	30 Amp	40 Amp	50 Amp (No Load Terminal)	60 Amp (No Load Terminal)
Max PV Voltage	100V	100V	100V	100V	150V	150V
Max Array Solar Panel power	130W/12V; 260W/24V	2600W/12V; 520W/24V	390W/12V; 780W/24V	520W/12V; 1040W/24V	625W/12V; 1250W/24V; 2500W/48V	750W/12V; 1500W/24V; 3000W/48V
Battery Type	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User and Lithium	Sealed, Gel(AGM), Flooded, User	Sealed, Gel(AGM), Flooded, User
Grounding	Common Negative	Common Negative	Common Negative	Common Negative	Common Negative	Common Negative
Controller Terminal	12AWG(4mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	2AWG(35mm 2 )
Recommended Cable Size	12AWG(4mm 2 )	10AWG(6mm 2 )	8AWG(10mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )	6AWG(16mm 2 )

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.