X-Tronic's “Platinum Edition” 100% Stainless Steel Commercial/Industrial Ultrasonic Cleaners are among the most Technologically Advanced Ultrasonic Cleaners sold in the United States Market. X-Tronic Ultrasonic Cleaners Feature a Frequency Sweeping Function, a Degassing Function, Piezoelectric Transducers and Digital LED Displays of Time & Temperature.
Frequency Sweeping Function
Frequency Sweep Technology is Featured in all of our X-Tronic Ultrasonic Cleaners and an ultrasonic cleaner “with” A Sweep Function uses multiple ultrasonic frequencies during the ultrasonic cleaning process no matter how many transducers are built into the unit. In ultrasonic cleaning, sweep is defined as a purposeful deviation from the center frequency during operation as a function of time. The result of using this function is that there will be “No Dead Spots” in the cleaning tank and makes for Much Superior cleaning of your object. Ultrasonic cleaners “without” the Sweep Function use just one single frequency to create the cavitation effect in the unit and this means that there "Will Be Dead Spots" in the cavitation and thus the cleaning of that object will be inferior.
By using the Sweep Function, every object you put in your tank to be cleaned will have perfect uniform cavitation cleaning that object with (again) no dead spots.
Our recommendation is to use the this function every time you ultrasonically clean any object because with Ultrasonic Sweep Cleaning we know you will be much more satisfied with the quality of the cleaning results.
Degassing Function
All X-Tronic Ultrasonic Cleaners also Feature a Degassing Feature. A degassing process should be undertaken each time fresh cleaning solutions are prepared. You have the option of not degassing fresh ultrasonic cleaning solutions but the penalty is decreased cleaning efficiency.
In a sentence the degas mode pulses the ultrasonic power on and off. During the on phase the bubbles form and coalesce, and during the off phase they rise to the surface and burst. This, by the way, is why cleaners equipped with degas are more efficient than those not so equipped.
So when you mix a fresh cleaning solution in your tank, we highly recommend that you turn on and run the degassing feature for approximately 5 minutes.
Piezoeectric Transducers of the Highest Quality
All X-Tronic Ultrasonic Cleaners are manufactured with Piezoelectric Transducers which have high efficiency, large amplitude, low heat and stable output unaffected by variations in load.
The high mechanical quality of piezo transducers ensures that these sandwich-type ultrasonic transducers offer high electro-acoustical efficiency and low heat generation. The mechanical connection of the piezoelectric elements assures a large amplitude output.
Independent studies have shown that the Overall Satisfaction Rate of the Cleaning Results received using an Ultrasonic Cleaner “With” a Sweep Function were in excess of 200% more favorable than using one without a Sweep Function.
Front Panel Controls for All Three Models Include:
Ultrasonic Cleaner Main Function Key (On/Off) LED Cleaning Time Display LED Temperature Display Ultrasonic Indication Lamp Heating Indication Lamp Function Keys Indication Lamps Frequency Sweeping Function Key (On/Off) Degassing Function Key (On/Off) Ultrasonic Function Key (On/Off) Cleaning Time Set Knob (5 Minute Increments & Full On) Heating Temperature Set Knob (0 Degrees Celsius to 80 Degrees Celsius
A 100% Stainless Steel "Fine Mesh" Cleaning Basket is Included with All 3 Sizes of X-Tronic's Ultrasonic Cleaners.
A 28 Prong Wire Rack Holder for Rings, Jewelry, Etc. is Included with All 3 Sizes of X-Tronic's Ultrasonic Cleaners.
A 400 ml Wire Beaker Holder is included with All 3 Sizes of X-Tronic's Ultrasonic Cleaners - Beakers are Not Shown nor Included
X-Tronic's “Platinum Edition” 100% Stainless Steel Commercial/Industrial Ultrasonic Cleaners are among the most Technologically Advanced Ultrasonic Cleaners sold in the United States Market. X-Tronic Ultrasonic Cleaners Feature a Frequency Sweeping Function, a Degassing Function, Piezoelectric Transducers and Digital LED Displays of Time & Temperature.
Frequency Sweeping Function
Frequency Sweep Technology is Featured in all of our X-Tronic Ultrasonic Cleaners and an ultrasonic cleaner “with” A Sweep Function uses multiple ultrasonic frequencies during the ultrasonic cleaning process no matter how many transducers are built into the unit. In ultrasonic cleaning, sweep is defined as a purposeful deviation from the center frequency during operation as a function of time. The result of using this function is that there will be “No Dead Spots” in the cleaning tank and makes for Much Superior cleaning of your object. Ultrasonic cleaners “without” the Sweep Function use just one single frequency to create the cavitation effect in the unit and this means that there "Will Be Dead Spots" in the cavitation and thus the cleaning of that object will be inferior.
By using the Sweep Function, every object you put in your tank to be cleaned will have perfect uniform cavitation cleaning that object with (again) no dead spots.
Our recommendation is to use the this function every time you ultrasonically clean any object because with Ultrasonic Sweep Cleaning we know you will be much more satisfied with the quality of the cleaning results.
Degassing Function
All X-Tronic Ultrasonic Cleaners also Feature a Degassing Feature. A degassing process should be undertaken each time fresh cleaning solutions are prepared. You have the option of not degassing fresh ultrasonic cleaning solutions but the penalty is decreased cleaning efficiency.
In a sentence the degas mode pulses the ultrasonic power on and off. During the on phase the bubbles form and coalesce, and during the off phase they rise to the surface and burst. This, by the way, is why cleaners equipped with degas are more efficient than those not so equipped.
So when you mix a fresh cleaning solution in your tank, we highly recommend that you turn on and run the degassing feature for approximately 5 minutes.
Piezoeectric Transducers of the Highest Quality
All X-Tronic Ultrasonic Cleaners are manufactured with Piezoelectric Transducers which have high efficiency, large amplitude, low heat and stable output unaffected by variations in load.
The high mechanical quality of piezo transducers ensures that these sandwich-type ultrasonic transducers offer high electro-acoustical efficiency and low heat generation. The mechanical connection of the piezoelectric elements assures a large amplitude output.
Independent studies have shown that the Overall Satisfaction Rate of the Cleaning Results received using an Ultrasonic Cleaner “With” a Sweep Function were in excess of 200% more favorable than using one without a Sweep Function.
Front Panel Controls for All Three Models Include:
Ultrasonic Cleaner Main Function Key (On/Off) LED Cleaning Time Display LED Temperature Display Ultrasonic Indication Lamp Heating Indication Lamp Function Keys Indication Lamps Frequency Sweeping Function Key (On/Off) Degassing Function Key (On/Off) Ultrasonic Function Key (On/Off) Cleaning Time Set Knob (5 Minute Increments & Full On) Heating Temperature Set Knob (0 Degrees Celsius to 80 Degrees Celsius
A 100% Stainless Steel "Fine Mesh" Cleaning Basket is Included with All 3 Sizes of X-Tronic's Ultrasonic Cleaners.
A 28 Prong Wire Rack Holder for Rings, Jewelry, Etc. is Included with All 3 Sizes of X-Tronic's Ultrasonic Cleaners.
A 400 ml Wire Beaker Holder is included with All 3 Sizes of X-Tronic's Ultrasonic Cleaners - Beakers are Not Shown nor Included
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.