VEVOR Laser Power Supply 40W Co2 Laser Engraver Power Supply Black Laser Tube Power Supply 110V/220V for Laser Cutter Engraving Machine(40W)

【HIGH EFFICIENCY】- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response.

【SIMPLE PORT CONTROL】- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside.

【LASER POWER ADJUSTMENT】- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals.

【OPEN CIRCUIT PROTECTION】- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube.

【FACTORY AGING TEST】- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds.

Retail Price: $ 54.97

Wholesale Price: Inquire Now


High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.	Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level.	Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.


Mark Clearly Each data is marked for your convenience. Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.	Protection Function Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life.	Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes.

Specification:

Input Voltage: AC110V / AC220V

Maximum Output Voltage: 23KV

Maximum Output Current: 20mA

Efficiency: 90%

Power：40W

Response Speed: ≤1ms

Cooling Method: Fan Cooling

Gross Weight:1.2kg/2.64lbs

Package Size: 23x23x12cm/9x9x5.11inch

Package Content:

1 x High Voltage Connector
1 x Laser Power Supply(40w)

Laser Power Supply

The CO2 laser power supply is small in size, light in weight, easy to operate, and has a good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube.

High Efficiency
Simple Port Control
Laser Power Adjustment
Open Circuit Protection


	40W Laser Power Supply	50W Laser Power Supply	60W Laser Power Supply	80W Laser Power Supply	100W Laser Power Supply	130W Laser Power Supply
Power	40W	50W	60W	80W	100W	130W
Color	Blue	Blue	Black	Black	Black	Black
Cooling Method	Fan Cooling	Fan Cooling	Fan Cooling	Fan Cooling	Fan Cooling	Fan Cooling

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

VEVOR Laser Power Supply 40W Co2 Laser Engraver Power Supply Black Laser Tube Power Supply 110V/220V for Laser Cutter Engraving Machine(40W)

BEST SELLERS

Product introduction

Shipping Notices

Product Description


High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube.	Easy Control The laser power supply machine starts and stop can be easily controlled by the TTL level.	Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog signal, can also input the PWN signal.


Mark Clearly Each data is marked for your convenience. Power detection instructions: When the power is in standby, press the test switch. If the "L" light is on, the "P" light is on, and the laser tube does not output laser light, the laser tube is broken. If the laser tube outputs laser light, the laser power is normal; if the laser light is off, it means that the laser power supply is broken.	Protection Function Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life.	Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes.

Specification:

Input Voltage: AC110V / AC220V

Maximum Output Voltage: 23KV

Maximum Output Current: 20mA

Efficiency: 90%

Power：40W

Response Speed: ≤1ms

Cooling Method: Fan Cooling

Gross Weight:1.2kg/2.64lbs

Package Size: 23x23x12cm/9x9x5.11inch

Package Content:

1 x High Voltage Connector
1 x Laser Power Supply(40w)

Laser Power Supply

High Efficiency
Simple Port Control
Laser Power Adjustment
Open Circuit Protection


	40W Laser Power Supply	50W Laser Power Supply	60W Laser Power Supply	80W Laser Power Supply	100W Laser Power Supply	130W Laser Power Supply
Power	40W	50W	60W	80W	100W	130W
Color	Blue	Blue	Black	Black	Black	Black
Cooling Method	Fan Cooling	Fan Cooling	Fan Cooling	Fan Cooling	Fan Cooling	Fan Cooling

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.