737G+ is a big improvement on the basis of 737G. It is specifically designed for battery welding (18650, 14500 and any other lithium batteries, etc) and can be used to weld nickel strips with thickness between 0.05 and 0.35 mm for nickel plated steel or between 0.05 and 0.25 mm for pure nickel strip.
- Attention:
- When the foot pedal is plugged in, it’s in MT mode, otherwise, it’s in AT mode.
- In all the preparation steps mentioned below, please make sure that the copper welding rods of the fixed head and the welding pins of the mobile welding pen are not in contact with each other to avoid short circuit. When users need to adjust the distance between welding pins on mobile welding pen or distance between copper welding rods of fixed head, please turn off the welder first, do not adjust the distance when the welder is on.)
Preparation steps for welding method 1:
1. Fit the fixed welding head with copper welding rods before the machine powers on.
2. Plug in foot pedal.
3. Turn on the main power button, and then the welding power switch.
4. Adjust the pulse quantity and welding current level to make the spots more reliable and elegant.
5. Weld your batteries with fixed welding head along with the foot pedal.
Preparation steps for welding method 2:
1. Insert mobile welding pen.(In this case, do not fit welding head with copper welding rods.)
2. Plug in foot pedal.
3. Turn on the main power button, and then the welding power switch.
4. Weld your batteries with mobile welding pen along with the foot pedal.
Preparation steps for welding method 3:
1. Insert mobile welding pen. (In this case, do not fit welding head with copper welding rods.)
2. Turn on the main power switch, and then turn on the welding power button.
3. Adjust the pulse quantity and welding current level to make the spots more reliable and elegant.
4. Weld your batteries with mobile welding pen.