Specification:

Digital Zoom: 16X. Video Sound: Support. TV Output: NTSC/PAL. Package Weight: 700G. USB Interface: USB 2.0.

Size: 5.3X2.7X2.2 inches. IR-CUT: IR-CUT light filter. Fill-in Light: IR light for night vision. Menu Language: Support multiple languages.

Exposure compensation: -2.0 EV to + 2.0 EV. Focusing Range: Normal 1.2m to infinity. Power: Li-ion battery NP-40, 3.7V 1500mAh.

Operation Modes: Video camera + Digital camera. Automatically Close: 1 minute,3 minute,5 minute,off.

File format: image format :JPEG,video format:MOV. Image sensor: CMOS image sensor, max 24.0 mega pixels.

Self-timer mode: Off, 2 seconds,10 seconds,10 seconds double. Camera lens: Fixed lens,Aperture F/3.2,Focal distance f=7.36mm.

LED Fill Lamp: Less than 1.0m; Recording: on/off; Shooting: on/off. Display Screen: 3.0 inch resistive touch screen,270 degree rotation.

White balance: Auto/Daylight/Cloudy/Fluorescent(H)/Incandescent/Fluorescent(L).

Operating system requirements: Windows XP,Windows Vista,Windows 7,Windows 8,Mac 10.2.

Storage: External SD/SDHC card（4GB to 32GB)(please note that the SD card is not included).

Resolution ratio of video: FHD 1920X1080P(30FPS),HD 1280X720P(60FPS),1280X720P(30FPS).

(1).Check power supply: Please place the fully charged battery.

(2).Input and format memory card: Please press the camera MENU button,then use the ok button to format.

(3).Turn over screen and switch on:Please press the camera MODE button continuously to switch mode,Other operations Press the MENU button.

(4).Photo Mode: Please press the camera Photo button to shoot photos under photo mode.

(5).Video Mode: Please press the camera red dot record button to start videos and press the red dot record button again to finish the videos.

(6).Playback Mode: Please press the camera MODE button continuously to enter into Playback mode, use the UP and DOWN button to browse photos or videos,then use the ok button to play photos and videos.

The steps to connect the camera to the computer :

1.Please press the camera ok button to turn on the camera,then use a usb cable to connect the camera port to the computer port.

2.The computer will be installed driver, then the computer screen will display the driver installation is complete.

3.Please press the camera MODE button to select the camera MSDC mode,then it be loaded on the computer to become an E disk.

External Microphone Need to Know：

1.Put the 1pc CR2032 button battery in the External Microphone.

2. When you switch “OFF” to “0dB” or “+20dB”, the light will be flash then off for power saving, but the microphone is in the pick up condition.

3. When the light is flashing for a long time or it always flash during use, indicates the power is very low and need to change a new battery.

4. External microphone sensitivity switch: “OFF” is for power off, “0dB” is for normal pickup, “+20dB” is for sensitivity enhancement pickup, which is suitable for long distance pickup.

5.Please check the 3.5mm connector cable carefully,plug the 3.5mm connector cable into the microphone socket and camera microphone socket.（Attention：should be insert completely）

(For more details about External Microphone, please read the manual.)

Remote Control Need to Know：

1.Please take the white paper out of the remote control in order to avoid the battery to be insulated and can't operate the remote control.

2.If your remote control can't operate,please check whether the front and back of the CR2025 battery is correctly inserted.

3.The remote control power button only can power off the camera,can't power on the camera,you need to use the camera to power on.

4.When you using the remote control to control camera,please note that the remote control is facing the camera.Because the camera and the remote control is connected by infrared sense.

5.When you using the HDMI cable connect the camera to the TV,please note that you need to change the TV's setting.(The TV needs to be switched to HD mode.)

6.When the camcorder connected to the HDMI cable to the TV,the camcorder screen will automatically turn off(normal reaction,not the camera malfunction) and the TV screen will be used as the camera screen.You can operate the camera button,then the TV screen will display these actions,such as record videos,playback the photos and videos.