Include Hands Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.

Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.

Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.

Parameter: \"I\" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (23/32 inch), thread length is 6.5 mm (6/24 inches).

STEP High Torque \"I\" Shaft Clock Movement: suitable for 1 - 4 mm (1/ 25 - 5/32 inches) thickness clock panel.

Retail Price: $ 9.88

Wholesale Price: Inquire Now

How to choose the suitable clock mechanism?

A- Thread length: 6.5 mm (0.26 inch)

B- Total shaft length is 18 mm (0.71 inch)

Measure the thread shaft of your old clock mechanism, if the length is shorter or equal to 6 mm, then this clock movement mechanism is suitable for your clock.

Installation Steps

1.Place metal hook over shaft.

2.Place plastic washer over shaft.

3.Insert shaft through clock face.

4.Place dial plate brass washer over shaft.

5.Attach dail fixing brass hex nut.

6.Gently press hour hand onto shaft at 12:00 postion.

7.Place minute hand over shaft at 12:00 postion.

8.Gently screw minute nut in place.

Original Youngtown 12888 Clock Mechanism

Youngtown 12888 world renowed.

High standard craftsmanship.

Metal shaft--rounded rectangle

Please compare the the holes of your own hands to shape of this clock mechanism shaft.

Classic Sun Logo

Recognize the Sun Logo to buy genuine.

Setup-time Gear

The time can be set by turning the time-set knob on the back of the clock movement.

High standard craftsmanship.

Metal shaft--rounded rectangle

Classic Sun Logo

Setup-time Gear

Apliacations


Fit for cross-stitch, three-dimensional embroidery, craft clock, quartz wall clock and DIY frame-less draw clock, etc.	Good handwork material to make a clock by yourself.	There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.


	8.8MM	11MM	14.5MM	17MM	20MM	23.5MM
Total shaft length	8.8MM	11mm (7/16 inch)	14.5mm (37/64 inch)	17mm (43/64 inch)	20mm (51/64 inch)	23.5mm (59/64 inch)
Thread length	No Thread	4.5mm (11/64 inch)	7mm (9/32 inch)	9.5mm (3/8 inch)	12mm (15/32 inch)	16mm (5/8 inch)
Suitable for	suitable for 1-2 mm ( 3/32 - 5/64 inch ) thickness clock panel	suitable for 1-3 mm ( 3/32 - 1/8 inch ) thickness clock panel	suitable for 1-4 mm ( 3/32 -5/32 inch ) thickness clock panel	suitable for 2-6 mm ( 5/64 - 15/64 inch ) thickness clock panel	suitable for 4-8 mm ( 5/32 - 5/16 inch ) thickness clock panel	suitable for 9-13 mm ( 23/64 - 1/2 inch ) thickness clock panel

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Include Hands Quartz DIY Wall Clock Movement Mechanism Battery Operated DIY Repair Parts Replacement

BEST SELLERS

Product introduction

Shipping Notices

From the manufacturer

How to choose the suitable clock mechanism?

A- Thread length: 6.5 mm (0.26 inch)

B- Total shaft length is 18 mm (0.71 inch)

Measure the thread shaft of your old clock mechanism, if the length is shorter or equal to 6 mm, then this clock movement mechanism is suitable for your clock.

Installation Steps

1.Place metal hook over shaft.

2.Place plastic washer over shaft.

3.Insert shaft through clock face.

4.Place dial plate brass washer over shaft.

5.Attach dail fixing brass hex nut.

6.Gently press hour hand onto shaft at 12:00 postion.

7.Place minute hand over shaft at 12:00 postion.

8.Gently screw minute nut in place.

Original Youngtown 12888 Clock Mechanism

Youngtown 12888 world renowed.

High standard craftsmanship.

Metal shaft--rounded rectangle

Please compare the the holes of your own hands to shape of this clock mechanism shaft.

Classic Sun Logo

Recognize the Sun Logo to buy genuine.

Setup-time Gear

The time can be set by turning the time-set knob on the back of the clock movement.

High standard craftsmanship.

Metal shaft--rounded rectangle

Classic Sun Logo

Setup-time Gear

Apliacations


Fit for cross-stitch, three-dimensional embroidery, craft clock, quartz wall clock and DIY frame-less draw clock, etc.	Good handwork material to make a clock by yourself.	There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.


	8.8MM	11MM	14.5MM	17MM	20MM	23.5MM
Total shaft length	8.8MM	11mm (7/16 inch)	14.5mm (37/64 inch)	17mm (43/64 inch)	20mm (51/64 inch)	23.5mm (59/64 inch)
Thread length	No Thread	4.5mm (11/64 inch)	7mm (9/32 inch)	9.5mm (3/8 inch)	12mm (15/32 inch)	16mm (5/8 inch)
Suitable for	suitable for 1-2 mm ( 3/32 - 5/64 inch ) thickness clock panel	suitable for 1-3 mm ( 3/32 - 1/8 inch ) thickness clock panel	suitable for 1-4 mm ( 3/32 -5/32 inch ) thickness clock panel	suitable for 2-6 mm ( 5/64 - 15/64 inch ) thickness clock panel	suitable for 4-8 mm ( 5/32 - 5/16 inch ) thickness clock panel	suitable for 9-13 mm ( 23/64 - 1/2 inch ) thickness clock panel

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy