Brown & Sharpe 599-7023-6 Dial Test Indicator Set, Top Mounted, M1.4x0.3 Thread, White Dial, 0-4-0 Reading, 1.5" Dial Dia., 0-0.008" Range, 0.0001" Graduation, +/-0.0001" Accuracy
Brown & Sharpe 599-7023-6 Dial Test Indicator Set, Top Mounted, M1.4x0.3 Thread, White Dial, 0-4-0 Reading, 1.5" Dial Dia., 0-0.008" Range, 0.0001" Graduation, +/-0.0001" Accuracy
  • Bestest-6 dial test indicator with rotatable, white face and carbide tip for measuring surface variations in narrow or recessed areas
  • Continuous clockwise pointer rotation displays units in fractional inches, and ball-bearing lever system swivels through to 180 degrees
  • Dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts on the top, front, and back
  • Monoblock body design with jeweled bearings in an isolated assembly for high accuracy, anti-magnetic for use around magnetic chucks, and corrosion-resistant chrome plating
  • Meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability
part:
  • 599-7023-6
measurement:
  • +/-0.0001"
Retail Price: $ 300.46
Wholesale Price: Inquire Now
...
Brown & Sharpe 599-7023-6 Dial Test Indicator Set, Top Mounted, M1.4x0.3 Thread, White Dial, 0-4-0 Reading, 1.5" Dial Dia., 0-0.008" Range, 0.0001" Graduation, +/-0.0001" Accuracy
Brown & Sharpe 599-7023-6 Dial Test Indicator Set, Top Mounted, M1.4x0.3 Thread, White Dial, 0-4-0 Reading, 1.5" Dial Dia., 0-0.008" Range, 0.0001" Graduation, +/-0.0001" Accuracy

BEST SELLERS

...
The Brown & Sharpe Bestest-6 series dial test indicator set has a white face and inch measurements. The indicator can make either horizontal or vertical measurements, and the white dial and contrasting black hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a white-face dial test indicator, a 0.040" (1mm) carbide contact point, a 0.080" (2mm) carbide contact point, a 0.120" (3mm) carbide contact point, an extension with dovetail (2), a point wrench, a Certificate of Accuracy and Traceability, and a storage box.

The Brown & Sharpe Bestest-6 series dial test indicator set has a white face and inch measurements. The indicator can make either horizontal or vertical measurements, and the white dial and contrasting black hand help make measurements easy to read. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts can be used for mounting from the top, front, or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability. The set includes a white-face dial test indicator, a 0.040" (1mm) carbide contact point, a 0.080" (2mm) carbide contact point, a 0.120" (3mm) carbide contact point, an extension with dovetail (2), a point wrench, a Certificate of Accuracy and Traceability, and a storage box.

Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials.

Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.

Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

What's in the Box?

  • Brown and Sharpe Bestest-6 white-face dial test indicator
  • 0.040" (1mm) carbide contact point
  • 0.080" (2mm) carbide contact point
  • 0.120" (3mm) carbide contact point
  • Extension with dovetail (2)
  • Point wrench
  • Certificate of accuracy and traceability
  • Storage box
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
... ... ...
Liquid,cream or cosmetics items are quantity limited in shopping agent service
... ... ...
Chinese medicine is limited to ship by Chinese exporting goods.
...
2 Limitation for different shipping methods:
...
3 Yoybuy Product's Label:
...
Sensitive Product(SEN)
...
Product With battery
...
Cream
...
Powder
...
Dangerous Products
...
....
4 Volume weight Requested:
...
volume weight=length*height*Width/5000
...
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
...
...
...
...
...
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.
After Sale Service:
2 The rules apply and summit for receive compensation
3 The conditions of accrual for amount insurance
3 The conditions of accrual for amount insurance
5 Damage to the parcel during international shipping, which resulted in damage to the goods in it
6 Loss of individual goods under international shipment The absence individual goods in the parcel
7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment
...

BEST SELLERS

Inquire Now
X

Contact us now

Language

Currency

    Upload image to find the same item

    Drag the image here, or Click to upload Tips: Only jpg, jpeg, png, webp

    Scan the QR code and use your phone to take a direct photo search.

    ×