(Make sure the chamber reaches the bottom, creating a seal between the inner chamber and outer chamber)
Note: Feel around the base of the chamber to see if the inner chamber is properly seated.
Using The Ice Genie Ice Cube Maker! Step 2
Fill water into the channel at the top of the Chamber. Fill until water reaches just above the top row of cubes.
Note: Pour out any water that overflows into the upper channel.
Using The Ice Genie Ice Cube Maker! Step 3
Snap the Lid onto the Ice Genie Cube Maker. Place into freezer until all the water is frozen. (4-6 hours).
Using The Ice Genie Ice Cube Maker! Step 4
Once frozen, remove Ice Genie Cube Maker from the freezer. Remove the Lid, then firmly squeeze the outer chamber on all sides.
Step 1
Step 2
Step 3
Step 4
Using The Ice Genie Ice Cube Maker! Step 5
Remove any loose ice that has formed on the upper chamber. Twist the inner chamber left/right until it is free. Then pull upward to remove it from the outer chamber.
If the inner chamber is difficult to remove, wait 30 seconds and repeat step 4/5.
Using The Ice Genie Ice Cube Maker! Step 6
Once inner chamber is removed, squeeze the outer chamber, releasing all the ice cubes into the middle area.
Using The Ice Genie Ice Cube Maker! Step 7
After all the ice cubes are released, put the inner chamber back into the outer chamber by pushing it into the Ice Genie Cube Maker. Move the cubes out of the way by twisting the inner chamber back and forth as you work the inner chamber all the way down.
Note: Feel the base of the outer chamber to see if the inner chamber's properly sealed.
Using The Ice Genie Ice Cube Maker! Step 8
After the inner chamber is fully seated in the Ice Genie Cube Maker, simply refill the channels of the chamber, leaving the already made cubes in the center of the Cylinder.
Once the Chamber is fully filled, repeat steps 3-6. Ice Genie Cube Maker can store up to three batches of ice at a given time.
Step 5
Step 6
Step 7
Step 8
FAQs
How many ice cubes does the Ice Genie make?
Ice Genie makes 40 cubes per round. The container itself can hold up to 120 ice cubes!
How long should I freeze the Ice Genie before my ice cubes are ready?
To ensure the water is fully frozen, we recommend freezing the Ice Genie 4-6 hours.
What do I do if my Ice Genie leaks when I pour water into the outer chamber?
A good way to ensure that there is minimal leakage from the outer chamber is making sure that the sleeve is fully pushed down.
There is a gap at the very bottom of the sleeve to the bottom of the chamber, is this correct?
Yes, this is correct. The bottom of the sleeve has small prongs that make the sleeve easier to remove once frozen. The Ice Genie is designed that the water seal is along the outside of the sleeve, not the bottom.
How can I wash the Ice Genie?
You can wash it by hand with warm soapy water or on the top rack of your dishwasher.
Are there any tips for removing the inner chamber?
Yes, you can place any standard can under the Ice Genie and push straight down on the blue silicone portion and it will make the inner chamber much easier to remove.
(Make sure the chamber reaches the bottom, creating a seal between the inner chamber and outer chamber)
Note: Feel around the base of the chamber to see if the inner chamber is properly seated.
Using The Ice Genie Ice Cube Maker! Step 2
Fill water into the channel at the top of the Chamber. Fill until water reaches just above the top row of cubes.
Note: Pour out any water that overflows into the upper channel.
Using The Ice Genie Ice Cube Maker! Step 3
Snap the Lid onto the Ice Genie Cube Maker. Place into freezer until all the water is frozen. (4-6 hours).
Using The Ice Genie Ice Cube Maker! Step 4
Once frozen, remove Ice Genie Cube Maker from the freezer. Remove the Lid, then firmly squeeze the outer chamber on all sides.
Step 1
Step 2
Step 3
Step 4
Using The Ice Genie Ice Cube Maker! Step 5
Remove any loose ice that has formed on the upper chamber. Twist the inner chamber left/right until it is free. Then pull upward to remove it from the outer chamber.
If the inner chamber is difficult to remove, wait 30 seconds and repeat step 4/5.
Using The Ice Genie Ice Cube Maker! Step 6
Once inner chamber is removed, squeeze the outer chamber, releasing all the ice cubes into the middle area.
Using The Ice Genie Ice Cube Maker! Step 7
After all the ice cubes are released, put the inner chamber back into the outer chamber by pushing it into the Ice Genie Cube Maker. Move the cubes out of the way by twisting the inner chamber back and forth as you work the inner chamber all the way down.
Note: Feel the base of the outer chamber to see if the inner chamber's properly sealed.
Using The Ice Genie Ice Cube Maker! Step 8
After the inner chamber is fully seated in the Ice Genie Cube Maker, simply refill the channels of the chamber, leaving the already made cubes in the center of the Cylinder.
Once the Chamber is fully filled, repeat steps 3-6. Ice Genie Cube Maker can store up to three batches of ice at a given time.
Step 5
Step 6
Step 7
Step 8
FAQs
How many ice cubes does the Ice Genie make?
Ice Genie makes 40 cubes per round. The container itself can hold up to 120 ice cubes!
How long should I freeze the Ice Genie before my ice cubes are ready?
To ensure the water is fully frozen, we recommend freezing the Ice Genie 4-6 hours.
What do I do if my Ice Genie leaks when I pour water into the outer chamber?
A good way to ensure that there is minimal leakage from the outer chamber is making sure that the sleeve is fully pushed down.
There is a gap at the very bottom of the sleeve to the bottom of the chamber, is this correct?
Yes, this is correct. The bottom of the sleeve has small prongs that make the sleeve easier to remove once frozen. The Ice Genie is designed that the water seal is along the outside of the sleeve, not the bottom.
How can I wash the Ice Genie?
You can wash it by hand with warm soapy water or on the top rack of your dishwasher.
Are there any tips for removing the inner chamber?
Yes, you can place any standard can under the Ice Genie and push straight down on the blue silicone portion and it will make the inner chamber much easier to remove.
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.