XLR Cable 3 Ft - Reliable, High Performance from Vitrius Cables - 3-pin Connectors, Male to Female

YOU DON'T WANT A CABLE THAT CRAPS OUT at that crucial moment in a live performance, or ruins that perfect take in a recording. This Vitrius 3 ft xlr cable is TOTALLY RELIABLE and stands up to constant use and abuse, in club gigs, concerts, church recitals, karaoke and studio recording. We have eliminated common cable problems – so you can rest easy and concentrate on your music-making.

WHY WASTE TIME OR MONEY swapping out cheap, unreliable cables? Save yourself the time and frustration, and in the end, some money, since you won't be replacing this Vitrius cable any time soon. Premium quality really doesn't need to cost more. Let Vitrius Cables prove it to you.

All Vitrius Cables use premium quality die-cast 3-pin XLR connectors, which feature a chuck-type strain relief, so the cable can't pull out of the connector, like many of the cheaper cables do, plus oxygen-free copper conductors, which gives you that super-clean, noise-free signal quality that really makes your music come to life.

Your music is important to you..it's your passion. At Vitrius Cables, we're Your Music Connection. Our mission and our passion is to provide you with high quality cables at a very reasonable price, and to be there for you if you have a problem, or need advice. You just won't get this kind of extensive technical knowledge and support from other cable sellers.

Compatible with all professional microphones, mixers, outboard gear, and powered speakers

size:

50-foot

Retail Price: $ 16.99

Wholesale Price: Inquire Now

Welcome to Vitrius Cables. Our line of XLR cables is built to a higher standard than other brands, yet these microphone cables will not cost you a whole lot more.

We take quality control very seriously. You can't afford to have a cable that stops working for you at the worst possible moment, whether it's a live performance, or in a recording.

You can easily change the color rings on the XLR connectors

The shells of these XLR connectors we use, are made from die-cast steel, not stamped. The upper, fluted section is made of a tough durable plastic, plus a rubber shoulder.

During assembly, this part tightens onto the shell, via a chuck-type strain relief, preventing the cable from being pulled out of the connector. This is a much more reliable type of strain relief than the standard xlr connectors that simply use a set screw.

These connectors also feature a colored ring. This makes it easier to identify which cable is which, in a live gig, or in a recording studio. If you have other Vitrius Cables, you can easily swap these color rings (no un-soldering required). Just unscrew the fluted part and carefully remove the outer shell. Swap the color rings and re-assemble in reverse order.

Using Vitrius XLR Cables in a Powered Speaker setup

Many customers ask if these cables can be used with power amplifiers. The short answer is 'no', but here's the qualifier:

If you're using powered speakers, (like from a mixer or pre-amp to the powered speakers), then, yes, you can use these Vitrius XLR cables, as long as both the mixer and the powered speaker have balanced 3-pin XLR connections.

However, if you're thinking of using these XLR cables to connect directly from a power amplifier to your un-amplified speakers, using an adapter, this is a no-go. The wire gauge of these inner conductors is not large enough to carry the prodigious current of the power amp. For this, you need heavy, 12 to 14 gauge speaker cables, usually using Speakon connectors.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

XLR Cable 3 Ft - Reliable, High Performance from Vitrius Cables - 3-pin Connectors, Male to Female

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Welcome to Vitrius Cables. Our line of XLR cables is built to a higher standard than other brands, yet these microphone cables will not cost you a whole lot more.

We take quality control very seriously. You can't afford to have a cable that stops working for you at the worst possible moment, whether it's a live performance, or in a recording.

You can easily change the color rings on the XLR connectors

The shells of these XLR connectors we use, are made from die-cast steel, not stamped. The upper, fluted section is made of a tough durable plastic, plus a rubber shoulder.

Using Vitrius XLR Cables in a Powered Speaker setup

Many customers ask if these cables can be used with power amplifiers. The short answer is 'no', but here's the qualifier:

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.