INCOM Manufacturing: High Intensity Reflective Tape, 2" x 30', Yellow

Excellent choice for marking anything that requires a high level of night time visibility

Made using high intensity micro-prismatic surface

Has a reflective value of over 4-times of our standard grade products

Intended for application on relatively flat surfaces only

Meets or exceeds ASTM D-4956 Type III/IV

color:

Yellow

Retail Price: $ 44.11

Wholesale Price: Inquire Now

Superbrite, High Intensity, High Reflective, Reflective Tape, Superbrite Tape

Engineer Grade; Reflective; Shiny; Vibrant; Good at night; night time; visibility;

INCOM Manufacturing Group provides a wide array of products including anti-slip tape, aisle marking tape, floor marking, reflective tape, barricade tape, pipe identification, safety signs and tags. INCOM has been manufacturing specialty adhesive tape and identification signage products for the safety and compliance markets since 1975.

What Is Superbrite High Intensity Reflective Tape?

Superbrite is an excellent choice for marking anything that requires a high level of night time visibility, and a with a long term life cycle. The tape has an excellent entrance angularity and high intensity micro-prismatic surface. This high intensity product has a reflective value of over 8 times that of our standard engineer grade products.

Intended for application on relatively flat surfaces only.
Any striped high intensity reflective tape is not intended for long-term outdoor applications.


Surface Preparation It is very important that the surface the tape is being adhered to is free from all contamination such as dirt, dust, grease and oil. A combination of 50/50 alcohol and water solution is usually adequate for removing most contamination. The wiper/cloth should be changed frequently (white cloth recommended). Heavy accumulation may require more aggressive cleaning techniques.	Temperature Temperature is a critical factor in adhesive bonding and is often over-looked. All our tape products are intended to be applied in temperatures of not less than 50ºF (10ºC). In general the closer to room temperature the better the bonding.	Pressure Tape products should be smoothed down with 15 psi of pressure or more. This will aid adhesive 'wet out' and result in better bonding.	Time Once the tape has been applied, the adhesive bond will continue to strengthen as it has time to cure. The ambient temperature will affect this bonding time (the colder the slower), but as a general rule good bonding will not be fully achieved for 24-48 hours after the application. Full bond strength will be reached at 72 hours (70ºF).

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

INCOM Manufacturing: High Intensity Reflective Tape, 2" x 30', Yellow

BEST SELLERS

Product introduction

Shipping Notices

Superbrite is an excellent choice for marking anything that requires a high level of night time visibility, and a with a long term life cycle. The tape has an excellent entrance angularity and high intensity micro-prismatic surface. An aggressive adhesive system that will adhere to most any clean, dry surface. High Intensity product has a reflective value of over 4 times that of our standard engineer grade products. Intended for application on relatively flat surfaces only. Product meets or exceeds ASTM D-4956 Type III/IV.

From the manufacturer

What Is Superbrite High Intensity Reflective Tape?

Superbrite is an excellent choice for marking anything that requires a high level of night time visibility, and a with a long term life cycle. The tape has an excellent entrance angularity and high intensity micro-prismatic surface. This high intensity product has a reflective value of over 8 times that of our standard engineer grade products.

Intended for application on relatively flat surfaces only.
Any striped high intensity reflective tape is not intended for long-term outdoor applications.


Surface Preparation It is very important that the surface the tape is being adhered to is free from all contamination such as dirt, dust, grease and oil. A combination of 50/50 alcohol and water solution is usually adequate for removing most contamination. The wiper/cloth should be changed frequently (white cloth recommended). Heavy accumulation may require more aggressive cleaning techniques.	Temperature Temperature is a critical factor in adhesive bonding and is often over-looked. All our tape products are intended to be applied in temperatures of not less than 50ºF (10ºC). In general the closer to room temperature the better the bonding.	Pressure Tape products should be smoothed down with 15 psi of pressure or more. This will aid adhesive 'wet out' and result in better bonding.	Time Once the tape has been applied, the adhesive bond will continue to strengthen as it has time to cure. The ambient temperature will affect this bonding time (the colder the slower), but as a general rule good bonding will not be fully achieved for 24-48 hours after the application. Full bond strength will be reached at 72 hours (70ºF).

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.