Coolrunner Child Safety Drawer Locks, Safety Invisible Drawer Latches with Strong Adhesive for Baby Care,Only fit for Some Drawer, Please See Below Before Buying

Retail Price: $ 9.99

Wholesale Price: Inquire Now

Invisible drawer lock would prevent baby openning it to avoid clamping finger, rummaging around, eating wrongly or taking dangerous goods out.

Features:

1. Hidden design, more safety.

2. Inside install is widely used in drawers.

3. Install simply without twisting the screw.

4. Strong adhesive tape, clean simply without trace, convenient for your general home cleaning.

How to use:

1. Remove the protective layer.

2. Stick the tape to the drawer lock(As the picture shows).

3. Clean the surface where you need to install. Remove the protective layer on the other side of lock hook and stick it on the outside of the drawer.

4. Remove the protective layer of the lock catch, stick it inside of drawer which parallel to drawer = 1 CM.

5. Put lock head with direction of lateral bending into U groove, then could finish "Normally Open"(NO) function.

6. Close drawer then could lock drawer, press button then could open drawer.

7. The adhesive gel takes about 24 hours to fully adhere, and can not be pulled in a short time. After sticking the drawer lock, please lay aside for 24 hours.

Package Included: 4/8 PACK

Kindly Note:

Not Fit All Drawers, Need Some Space to install it (The height to install it should be over 3.3 cm(1.3"), the width to install should be at 1.2-1.8cm. Not work on cabinets/cupboards and can't be used on the top or middle.)

Warmming Tips

- When installation, do not touch sticker by hand or double use, that will make sticker weaker to use.

- The adhesive gel takes about 24 hours to fully adhere, and can not be pulled in a short time. After sticking the drawer lock, please lay aside for 24 hours.

Convenience For You

- Using strong adhesive tape, no need to drill on your drawers. You can finish in minutes.

- Install in the drawer will be more safety for your lovely baby.

- Appealing low-profile design with colors made to match your home decor.


The height to install it must be over 3.3 cm(1.3")	Width to install must be in the range of 1.2 - 1.8 cm.	The distance from lock catch to the drawer must be 1cm.

This website follows the safe harbor principle. If any infringement, please inform us in time and we will delete it in time. About safe harbor，please click here to learn more.

After Sale Service:

1 Insurance Policy: Click to go to the Help Center to view the Insurance Policy

2 The rules apply and summit for receive compensation

3 The conditions of accrual for amount insurance

5 Damage to the parcel during international shipping, which resulted in damage to the goods in it

6 Loss of individual goods under international shipment The absence individual goods in the parcel

7 Non-compliance individual goods in color, size, complications Damage to the goods during international shipment

8 Returns Policy: Click to go to the Help Center to view the Returns Policy

All Category
All Category

Women's Clothings

Men's Clothings

Coolrunner Child Safety Drawer Locks, Safety Invisible Drawer Latches with Strong Adhesive for Baby Care,Only fit for Some Drawer, Please See Below Before Buying

BEST SELLERS

Product introduction

Shipping Notices

Product Description

Invisible drawer lock would prevent baby openning it to avoid clamping finger, rummaging around, eating wrongly or taking dangerous goods out.

Features:

1. Hidden design, more safety.

2. Inside install is widely used in drawers.

3. Install simply without twisting the screw.

4. Strong adhesive tape, clean simply without trace, convenient for your general home cleaning.

How to use:

1. Remove the protective layer.

2. Stick the tape to the drawer lock(As the picture shows).

3. Clean the surface where you need to install. Remove the protective layer on the other side of lock hook and stick it on the outside of the drawer.

4. Remove the protective layer of the lock catch, stick it inside of drawer which parallel to drawer = 1 CM.

5. Put lock head with direction of lateral bending into U groove, then could finish "Normally Open"(NO) function.

6. Close drawer then could lock drawer, press button then could open drawer.

7. The adhesive gel takes about 24 hours to fully adhere, and can not be pulled in a short time. After sticking the drawer lock, please lay aside for 24 hours.

Package Included: 4/8 PACK

Kindly Note:

Warmming Tips

- When installation, do not touch sticker by hand or double use, that will make sticker weaker to use.

- The adhesive gel takes about 24 hours to fully adhere, and can not be pulled in a short time. After sticking the drawer lock, please lay aside for 24 hours.

Convenience For You

- Using strong adhesive tape, no need to drill on your drawers. You can finish in minutes.

- Install in the drawer will be more safety for your lovely baby.

- Appealing low-profile design with colors made to match your home decor.


The height to install it must be over 3.3 cm(1.3")	Width to install must be in the range of 1.2 - 1.8 cm.	The distance from lock catch to the drawer must be 1cm.

Shipping Notices:

1 Contraband and limited items:

Clgarette,Alcohol,Contraband ?Do not accept

Liquid,cream or cosmetics items are quantity limited in shopping agent service

Chinese medicine is limited to ship by Chinese exporting goods.

2 Limitation for different shipping methods:

3 Yoybuy Product's Label:

Sensitive Product(SEN)

Product With battery

Cream

Powder

Dangerous Products

4 Volume weight Requested:

volume weight=length*height*Width/5000

one side must be less than 120cm，otherwise there is additional fee；250cm products can not be accept；

Any side must be less than 60cm，otherwise you will be charged the greater one between real weight and volume weight，more than 120cm will be not accepted.