Crystiles Peel and Stick Stainless Metal Tile, Self-Adhesive Aluminum Tile Backsplash, Brushed Copper, 6" X 3", Item #60603605, 60-Pack
3\" X 6\" tile, 60 pack, cover 7.5 squre feet a pack.
This self-adhesive tile backsplash is easy to install and is perfect for DIY renovation project: no glue or grout needed, just peel and stick. Superior adhesion on most flat, dry and free of dust surfaces.
This stainless Aluminum tile can add a luxurious touch into your kitchens, bathrooms or feature walls; affordable elegance for any contemporary, traditional or transitional rooms.
Resistant to heat and moisture. Warning: Don't expose tile to open flames, or submerse in water.
Easy to clean and maintain. It can work with Command Hooks perfectly.
Use a chop saw or an angle grinder with a metal cutting blade to cut the tile chips. Use a ruler and permanent marker to trace a line to help you to cut the tile.
CAUTION: Always use protective equipment such as gloves and safety goggles.
Utility Knife
Use scissors or utility knife to cut in-between the chips.
Tape Measure
Use a tape measure to ensure you have enough tile before you start.
Remove power outlets and light switch covers before installation. The wall should be prepared and ensure it is clean, dry, flat, primed and free of dust, dirt and oils.
If the wall is damaged or uneven, additional construction adhesive should be used.
TIP: Lining up the tiles properly might be a challenge as the other parts of the tile may start to stick to the wall before you get it lined up properly. So peel off ONLY THE FIRST 2 INCHES of the backing, line up the tile properly, and then peel off the rest of the backing and stick the whole tile on the wall.
Once the tile is in the desired place, apply pressure to the tile.
ATTENTION: Make sure the tile is positioned properly before applying any pressure. Applying pressure to the tile will permanently bond it to the wall. If the tile is installed in the wrong position, removing it may cause damage to substrate where the tiles have been applied.
Use a chop saw or an angle grinder with a metal cutting blade to cut the tile chips. Use a ruler and permanent marker to trace a line to help you to cut the tile.
CAUTION: Always use protective equipment such as gloves and safety goggles.
Utility Knife
Use scissors or utility knife to cut in-between the chips.
Tape Measure
Use a tape measure to ensure you have enough tile before you start.
Remove power outlets and light switch covers before installation. The wall should be prepared and ensure it is clean, dry, flat, primed and free of dust, dirt and oils.
If the wall is damaged or uneven, additional construction adhesive should be used.
TIP: Lining up the tiles properly might be a challenge as the other parts of the tile may start to stick to the wall before you get it lined up properly. So peel off ONLY THE FIRST 2 INCHES of the backing, line up the tile properly, and then peel off the rest of the backing and stick the whole tile on the wall.
Once the tile is in the desired place, apply pressure to the tile.
ATTENTION: Make sure the tile is positioned properly before applying any pressure. Applying pressure to the tile will permanently bond it to the wall. If the tile is installed in the wrong position, removing it may cause damage to substrate where the tiles have been applied.
Kitchen and Bathroom Backsplash, Feature Walls. NOT for Swimming Pools.
Kitchen and Bathroom Backsplash, Feature Walls. NOT for Swimming Pools.
Kitchen and Bathroom Backsplash, Feature Walls. NOT for Swimming Pools.
Kitchen and Bathroom Backsplash, Feature Walls. NOT for Swimming Pools.
Kitchen and Bathroom Backsplash, Feature Walls. NOT for Swimming Pools.
Boarder, Frame
Pack
4 Pack. Also 1 Pack for Sample Purpose
4 Pack. Also 1 Pack for Sample Purpose
4 Pack. Also 1 Pack for Sample Purpose
12 Pack
24 Pack. Also 1 and 60 Pack.
4 Pack. Also 1 Pack for Sample Purpose
Shipping Notices:
1 Contraband and limited items:
Clgarette,Alcohol,Contraband ?Do not accept
Liquid,cream or cosmetics items are quantity limited in shopping agent service
Chinese medicine is limited to ship by Chinese exporting goods.
2 Limitation for different shipping methods:
3 Yoybuy Product's Label:
Sensitive Product(SEN)
Product With battery
Cream
Powder
Dangerous Products
4 Volume weight Requested:
volume weight=length*height*Width/5000
one side must be less than 120cm,otherwise there is additional fee;250cm products can not be accept;
Any side must be less than 60cm,otherwise you will be charged the greater one between real weight and volume weight,more than 120cm will be not accepted.