THE SHELLY 2.5
А small diamond brought together the best experience and engineering
Shelly 2.5 maximum load is 2x2300W or 2x10A without any issue Independent dual power metering for each channel overload and temperature protection detailed history
Shelly 2.5 comes with a programming/debug header which can be used to flash alternative firmware on the device. It has an ESP8266 inside, with a 2MB flash chip. A USB-to-UART adapter is needed as well as a reliable 3.3V with at least 350 mA drive capability
Shelly 2.5 Double Relay Switch and Roller Shutter control any 110-230V roller shutter, motorized curtains or awning
No more wiring issues. You can revert AC or External switch poles whenever you need.
Warning: Both relay inputs are interconnected and should be to the same pole
Internal temperature sensor for overheating protection. If the PCB temperature goes at danger level for any reason, the device will switch off.