Understanding your worries for your battery help and need for battery testing efficiency, this 12V car battery tester helps you to accurately test the car battery system of battery health, cranking and charging status within seconds. And support 8 languages, it’s the perfect professional battery analyzer for enthusiasts, small garages, independent repairs.
Product Highlights
1. Compared to normal battery tester’s testing range 100~1100 CCA, our car battery tester is wider and more superior as it can test all 12V 100~2000CCA batteries compatible with regular flooded, AGM flat plate, AGM spiral, or gel batteries
2. Powerful STM-32 chip provides more precise testing reports within milliseconds, greatly improves the speed and ensures the accuracy
3. The battery cca tester will also give you professional advice according to it then decide whether to replace or charge the battery and inform you about the battery status in advance to prevent possible battery failures
4. Designed with simplicity and convenience in mind, the Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries
5. It can switch up to 8 languages for different needs. Works for Vehicles/Marine/Motorcycle.
WARNING:
- KW210 car battery diagnostic tester only works for 12V batteries, not compatible with 24V system
- The battery cca tester never discharges or drain the battery.
- If there are abnormal test results, maybe your battery is overcharged or incompletely charged. So, the battery will be damaged or its life will be greatly shortened, then you can take action to deal with this issue.
Why do you need to know battery conditions (Good or replace)?
Help you know the battery status in advance to prevent the annoying battery failure situations.
Plug and play--input the rated battery capacity, KW210 will start analyzing the battery's CCA (or AH）value, charge (%), voltage (v), internal resistance (Ω), rated CCA, battery healthy (%) and display the test result on screen within seconds.
Provide you 5 kinds of professional advice accordingly:
- GOOD BATTERY: The battery is without any problem, use it without worries!
- GOOD, RECHARGE: Good battery but low current, recharge before using.
- REPLACE: The battery is already or near to reach the end of the using life, please replace the battery.
- BAD CELL, REPLACE: Battery interior damaged, bad cell or short circuit, replace the battery
- CHARGE-RETEST: Unstable battery shall be recharged and retested to avoid error.
3 IN 1 Multiple Battery System Test
In order to find out the vehicles’ battery system health status, the KW210 battery analyzer can help you to perform multiple tests to identify which part of the car battery is good or not.
Battery Test–displays SOH (State of Health), SOC (State of Charge), Voltage, Current Rating and the readable analysis result for your reference;
Cranking Test–analyzes the actual cranking voltage and the cranking time to help you quickly figure out the whole status of the starting system;
Charging Test–tests different parts of the charging system, including generator, rectifier, rectifier diode and so on to get a reliable charging volt value.
|
|
|
|
|---|---|---|
Fast TestingWith the help of STM32 chipset hardware, fast and smooth running speed is realized. Our car battery load tester can quickly and accurately check the working status of the generator and will be the perfect battery test tool for your work and home. |
MultifunctionIt is a professional vehicle diagnostic tool that can check the battery system problem by using the drawing voltage monitoring tool to determine the battery status as good or replace. It can check battery capacity-cold start current (CCA), DIN, EN and IEC information relative to battery rating. Check the internal resistance value (m). Battery startup test, load test, battery charge test, ripple test can be done too. |
MultilingualSupport 8 languages including German, French, Dutch, Russian, Spanish, Intalian and Portuguese, meeting the need of most language users. |
Specifications
Display:Color TFT LCD Screen.
System Voltage:12 Volts.
Input Voltage Range:8V-16V.
Power Requirements:No internal batteries required.
Power on when hooked up during testing.
Operating Temperatuer：0℃-50℃.
Storage Temperature：-20℃-70℃.
Wide Appliance
Can Test All 100-2000 CCA Car, Boat, Motorcycle Batteries
Package included
- 1 x KW210 Battery Tester Unit
- 1 x USB Cable for upgrade and print
- 1 x Box
- 1 x User Manual
- 1 xProtective Nylon case
BEST SELLERS
Product Description
Understanding your worries for your battery help and need for battery testing efficiency, this 12V car battery tester helps you to accurately test the car battery system of battery health, cranking and charging status within seconds. And support 8 languages, it’s the perfect professional battery analyzer for enthusiasts, small garages, independent repairs.
Product Highlights
1. Compared to normal battery tester’s testing range 100~1100 CCA, our car battery tester is wider and more superior as it can test all 12V 100~2000CCA batteries compatible with regular flooded, AGM flat plate, AGM spiral, or gel batteries
2. Powerful STM-32 chip provides more precise testing reports within milliseconds, greatly improves the speed and ensures the accuracy
3. The battery cca tester will also give you professional advice according to it then decide whether to replace or charge the battery and inform you about the battery status in advance to prevent possible battery failures
4. Designed with simplicity and convenience in mind, the Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries
5. It can switch up to 8 languages for different needs. Works for Vehicles/Marine/Motorcycle.
WARNING:
- KW210 car battery diagnostic tester only works for 12V batteries, not compatible with 24V system
- The battery cca tester never discharges or drain the battery.
- If there are abnormal test results, maybe your battery is overcharged or incompletely charged. So, the battery will be damaged or its life will be greatly shortened, then you can take action to deal with this issue.
Why do you need to know battery conditions (Good or replace)?
Help you know the battery status in advance to prevent the annoying battery failure situations.
Plug and play--input the rated battery capacity, KW210 will start analyzing the battery's CCA (or AH）value, charge (%), voltage (v), internal resistance (Ω), rated CCA, battery healthy (%) and display the test result on screen within seconds.
Provide you 5 kinds of professional advice accordingly:
- GOOD BATTERY: The battery is without any problem, use it without worries!
- GOOD, RECHARGE: Good battery but low current, recharge before using.
- REPLACE: The battery is already or near to reach the end of the using life, please replace the battery.
- BAD CELL, REPLACE: Battery interior damaged, bad cell or short circuit, replace the battery
- CHARGE-RETEST: Unstable battery shall be recharged and retested to avoid error.
3 IN 1 Multiple Battery System Test
In order to find out the vehicles’ battery system health status, the KW210 battery analyzer can help you to perform multiple tests to identify which part of the car battery is good or not.
Battery Test–displays SOH (State of Health), SOC (State of Charge), Voltage, Current Rating and the readable analysis result for your reference;
Cranking Test–analyzes the actual cranking voltage and the cranking time to help you quickly figure out the whole status of the starting system;
Charging Test–tests different parts of the charging system, including generator, rectifier, rectifier diode and so on to get a reliable charging volt value.
|
|
|
|
|---|---|---|
Fast TestingWith the help of STM32 chipset hardware, fast and smooth running speed is realized. Our car battery load tester can quickly and accurately check the working status of the generator and will be the perfect battery test tool for your work and home. |
MultifunctionIt is a professional vehicle diagnostic tool that can check the battery system problem by using the drawing voltage monitoring tool to determine the battery status as good or replace. It can check battery capacity-cold start current (CCA), DIN, EN and IEC information relative to battery rating. Check the internal resistance value (m). Battery startup test, load test, battery charge test, ripple test can be done too. |
MultilingualSupport 8 languages including German, French, Dutch, Russian, Spanish, Intalian and Portuguese, meeting the need of most language users. |
Specifications
Display:Color TFT LCD Screen.
System Voltage:12 Volts.
Input Voltage Range:8V-16V.
Power Requirements:No internal batteries required.
Power on when hooked up during testing.
Operating Temperatuer：0℃-50℃.
Storage Temperature：-20℃-70℃.
Wide Appliance
Can Test All 100-2000 CCA Car, Boat, Motorcycle Batteries
Package included
- 1 x KW210 Battery Tester Unit
- 1 x USB Cable for upgrade and print
- 1 x Box
- 1 x User Manual
- 1 xProtective Nylon case
BEST SELLERS
Menu
-
B2B
-
Shopping Agent
-
Forwarding
-
Support
-
Brand Introduction
-
Login
Sign Out
-
Language English
-
Currency RUB
Language
Currency
Drag the image here, or
Click to upload
Tips: Only jpg, jpeg, png, webp
Scan the QR code and use your phone to take a direct photo search.
×
